Mazda Buyers Guide
Click a car name to see the crash test details for that model.
Crash Test Data for 2002 Mazda
| Mazda Vehicle | Front Star Rating | Side Star Rating | Rollover Resistance Rating | ||
|---|---|---|---|---|---|
| Driver | Passenger | Front Seat | Rear Seat | ||
| 2002 626 |  |  |  | | Not Tested |
| 2002 B-Series | | | | Not Tested | |
| 2002 B-Series | | | | Not Tested | |
| 2002 Miata MX-5 | | | | Not Tested | Not Tested |
| 2002 Millenia | Not Tested | Not Tested | | | Not Tested |
| 2002 MPV | | | | | |
| 2002 Protege | | | | | Not Tested |
| 2002 Tribute | | | | | |
Service Bulletins for 2002 Mazda
| 2002 MAZDA 626 | |
|---|---|
| Bulletin Number: | |
| INFORMATION ON FUEL INJECTOR(S) REPLACEMENT GUIDELINES. *SLC | |
| Bulletin Number: 00-001-13-2748 | |
| MAZDA HAS DEVELOPED FACTORY RECOMMENDED SCHEDULED MAINTENANCE SERVICES THAT SUPPORT ALL MAJOR VEHICLE SYSTEMS. MAZDA RECOMMENDS DEALERS FOLLOW THE SCHEDULED MAINTENANCE TABLES AS CITED IN THE VEHICLE-SPECIFIC WORKSHOP MANUAL OR OWNERS MANU | |
| Bulletin Number: 00-001-13-2748A | |
| MAZDA HAS DEVELOPED FACTORY RECOMMENDED SCHEDULED MAINTENANCE SERVICES THAT SUPPORT ALL MAJOR VEHICLE SYSTEMS. MAZDA RECOMMENDS DEALERS FOLLOW THE SCHEDULED MAINTENANCE TABLES AS CITED IN THE VEHICLE-SPECIFIC WORKSHOP MANUAL OR OWNERS MANU | |
| Bulletin Number: 00-001-18-3446 | |
| Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle-specific workshop manual or owner's manu | |
| Bulletin Number: 00-001-18-3446a | |
| Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle- specific workshop manual or owner's man | |
| Bulletin Number: 00-001-19-3560 | |
| Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle- specific workshop manual or owner's man | |
| Bulletin Number: 00-002-14-2936 | |
| MAZDA NORTH AMERICAN OPERATIONS RECEIVED MANY REQUESTS FROM OUR DEALERS ASKING US TO APPROVE ADDITIONAL ON-CAR BRAKE LATHES AS AN OPTION FOR MNAO AUTHORIZED EQUIPMENT. DUE TO YOUR FEEDBACK AND AFTER EVALUATING A FEW ON-CAR BRAKE LATHES, WE | |
| Bulletin Number: 00-002-19-3561 | |
| Mazda North American Operations has approved an additional on-car brake lathe as an option for MNAO authorized equipment. The Pro-Cut On-Car Brake Lathe has been added to the MNAO authorized equipment program. NOTE: Accu-turn is still an ap | |
| Bulletin Number: 00-003-18-3480 | |
| Mazda North American Operations has approved an additional on-car brake lathe as an option for MNAOauthorized equipment. The Pro-Cut On-Car Brake Lathe has been added to the MNAO authorizedequipment program.NOTE: Accu-turn is still an appro | |
| Bulletin Number: 00-003-18-3480a | |
| Mazda North American Operations has approved an additional on-car brake lathe as an option for MNAO authorized equipment. The Pro-Cut On-Car Brake Lathe has been added to the MNAO authorized equipment program. NOTE: Accu-turn is still an ap | |
| Bulletin Number: 00-003-19-3583 | |
| In support of the new MRT distribution, Mazda will ship to dealers a new Dual Purpose Diagnostic Leak Detector beginning March, 2019. Training videos will be posted to MGSS shortly and Workshop Manual procedures will be revised gradually. | |
| Bulletin Number: 00-004/12 | |
| SUMMARY TO BE PROVIDED ON A FUTURE DATE. | |
| Bulletin Number: 00-004-12-2741 | |
| MAZDA HAS DEVELOPED FACTORY RECOMMENDED SCHEDULED MAINTENANCE SERVICES THAT SUPPORT ALL MAJOR VEHICLE SYSTEMS. MAZDA RECOMMENDS DEALERS FOLLOW THE SCHEDULED MAINTENANCE TABLES AS CITED IN THE VEHICLE-SPECIFIC WORKSHOP MANUAL OR OWNERS MANU | |
| Bulletin Number: 00-004-16-3237 | |
| RAISING A VEHICLE WITH A JACK CAN BE DANGEROUS IF NOT DONE PROPERLY. THE VEHICLE CAN SLIP OFF THE JACK AND SERI-OUSLY INJURE SOMEONE. IN THIS SERVICE INFORMATION, SOME IMPORTANT WARNINGS AND CAUTIONS HAVE BEEN TAKEN FROM THE OWNERS MANUAL. | |
| Bulletin Number: 00204 | |
| EVAPORATIVE EMMISSIONS AND RECIVER ADAPTERS. *EH | |
| Bulletin Number: 00307 | |
| AVAILABILITY OF NON-REQUIRED TOOLS. *KB | |
| Bulletin Number: 01-001-19-3551 | |
| This service bulletin provides testing and charging procedures in order to promote proper battery maintenance, to deliver new vehicles with fully charged batteries, and to reduce unnecessary battery replacement cost. For new vehicles in sto | |
| Bulletin Number: 01-002-19-3552 | |
| The Mazda GR8-1291 is required for all warranty battery testing. If the Mazda GR8-1291 is not used, incorrect battery testing may result in unnecessary battery replacement. Use the following test procedures in this Service Bulletin to test | |
| Bulletin Number: 01-003-15-3014 | |
| USE THE FOLLOWING REPAIR PROCEDURE TO MINIMIZE THE NEED TO REPLACE THE CATALYST CONVERTER/EXHAUST PIPE WHEN REMOVING OXYGEN SENSORS AND/OR AIR FUEL RATIO SENSORS. | |
| Bulletin Number: 0100402 | |
| SUBJECT REGARDING DIAGNOSTIC INFORMATION OF OXYGEN SENSOR, CATALYST EFFICIENCY AND FUEL SYSTEM MONITORS. *SLC | |
| Bulletin Number: 01-004-19-3558 | |
| On some vehicles, a sulfur smell or 'rotten egg' odor may be noticed coming from the exhaust system. The odor is usually noticed after a cold start, fast idle, extended periods of idling and full throttle acceleration. Sulfur smell is not a | |
| Bulletin Number: 01-008-18-3451 | |
| This service bulletin provides testing and charging procedures in order to promote proper battery maintenance, to deliver new vehicles with fully charged batteries, and to reduce unnecessary battery replacement cost. For new vehicles in sto | |
| Bulletin Number: 01-009-18-3452 | |
| The Mazda GR8-1291 is required for all warranty battery testing. If the Mazda GR8-1291 is not used, incorrect battery testing may result in unnecessary battery replacement. Use the following test procedures in this Service Bulletin to test | |
| Bulletin Number: 01-016-18-3522 | |
| On some vehicles, a sulfur smell or 'rotten egg' odor may be noticed coming from the exhaust system. The odor is usually noticed after a cold start, fast idle, extended periods of idling and full throttle acceleration. Sulfur smell is not a | |
| Bulletin Number: 0102504 | |
| BATTERY TEST PROCEDURE REQUIREMENTS. *TT | |
| Bulletin Number: 0102704 | |
| ROUGH IDLE / HESITATION / STUMBLE / MISFIRE / MALFUNCTION INDICATOR LAMP ILLUMINATION WITH DIAGNOSTIC TROUBLE CODE P0300, P0301, P0302, P0303, P0304. *TT | |
| Bulletin Number: 02-001-13-2752 | |
| SOME CUSTOMERS MAY COMPLAIN OF SIGNS OF OIL ON THE STRUTS OR SHOCK ABSORBERS. IN MOST CASES THE OIL THAT IS PRESENT IS NORMAL, AND A RESULT OF THE OIL THAT REMAINS ON THE SHAFT DURING THE NORMAL SWEEPING PROCESS OF THE SHAFT SEAL. FOLLOW TH | |
| Bulletin Number: 02-001-19-3550 | |
| Some customers may complain of signs of oil on the struts or shock absorbers. In most cases the oil that is present is normal, and a result of the oil that remains on the shaft during the normal sweeping process of the shaft seal. Follow th | |
| Bulletin Number: 02-006-18-3449 | |
| Some customers may complain of signs of oil on the struts or shock absorbers. In most cases the oil that is present is normal, and a result of the oil that remains on the shaft during the normal sweeping process of the shaft seal. Follow th | |
| Bulletin Number: 0200701 | |
| SUBJECT REGARDING GRINDING/RUBBING NOISE AT FRONT OF VEHICLE, MODELS WITH VINS FROM Y5148597 TO Y5159897 WITH 4 CYLINDER AUTOMATIC TRANSMISSION. *SLC | |
| Bulletin Number: 0400502 | |
| INADVERTENT DISABLING OF BRAKE SHIFT INTERLOCK. *TT | |
| Bulletin Number: 06012004 | |
| PROGRAMMABLE MODULE INSTALLATION. ( 2004 MAZDA B SERIES) *JB | |
| Bulletin Number: 07-002-13-2842 | |
| A MUSTY/MILDEW TYPE ODOR MAY COME FROM THE VENTS WHEN THE AIR CONDITIONING (A/C) SYSTEM IS OPERATING. IT IS MOST NOTICEABLE WHEN THE A/C IS FIRST TURNED ON. THIS ODOR IS THE RESULT OF MOLD GROWTH IN THE A/C EVAPORATOR/COOLING UNIT WHICH IS | |
| Bulletin Number: 07-002-18-3432 | |
| A musty/mildew type odor may come from the vents when the air conditioning (A/C) system is operating. It is most noticeable when the A/C is first turned ON. This odor is the result of mold growth in the A/Cevaporator/cooling unit which is c | |
| Bulletin Number: 07-002-19-3616 | |
| A musty/mildew type odor may come from the vents when the air conditioning (A/C) system is operating. It is most noticeable when the A/C is first turned ON. This odor is the result of mold growth in the A/C evaporator/cooling unit which is | |
| Bulletin Number: 0700402 | |
| SUBJECT REGARDING AIR CONDITIONING MUSTY / MILDEW ODOR. *TT | |
| Bulletin Number: 0800306 | |
| NON GENUINE ACCESSORIES AFFECT AIR BAG OPERATION. *KB | |
| Bulletin Number: 08022004 | |
| DEALER NOTICE - SERVICE BULLETIN RELEASE. *TT | |
| Bulletin Number: 0900104 | |
| PORT OR DEALER INSTALLED AUTO-DIMMING (ELECTRO-CHROMIC) MIRROR, WITH ELECTRONIC COMPASS, AMBIENT TEMPERATURE. *MR | |
| Bulletin Number: 09-002-19-3554 | |
| This service bulletin provides information regarding the proper use of the driver's floor mat to avoid anypotential interference with the foot pedals. The following are possible causes of floor mat interference,which can be avoided with pro | |
| Bulletin Number: 0900403 | |
| REAR WINDOW DEFROSTER GRID LINE REPAIR PROCEDURE. *TT | |
| Bulletin Number: 09-005-13-2781 | |
| THIS SERVICE BULLETIN PROVIDES INFORMATION REGARDING THE PROPER USE OF THE DRIVERS FLOOR MAT TO AVOID ANY POTEN-TIAL INTERFERENCE WITH THE FOOT PEDALS. THE FOLLOWING ARE POSSIBLE CAUSES OF FLOOR MAT INTERFERENCE, WHICH CAN BE AVOIDED WITH | |
| Bulletin Number: 09-005-19-3562 | |
| When encountering a vehicle with paint damage, refer to the "Mazda Pocket Paint Guide" to determine cause, prevention, remedy, and warranty coverage (if applicable). Copies of the Mazda Pocket Paint Guide are available for order on Mazda e- | |
| Bulletin Number: 0900701 | |
| SUBJECT REGARDING AUDIO REMOVAL - ELECTRICAL SHORT/DAMAGE TO PRINTED CIRCUIT. *JG | |
| Bulletin Number: 09-009-19-3566 | |
| In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer's responsibility to co | |
| Bulletin Number: 09-014-18-3443 | |
| When encountering a vehicle with paint damage, refer to the "Mazda Pocket Paint Guide" to determine cause, prevention, remedy, and warranty coverage (if applicable). | |
| Bulletin Number: 09-014-18-3443a | |
| When encountering a vehicle with paint damage, refer to the "Mazda Pocket Paint Guide" to determine cause, prevention, remedy, and warranty coverage (if applicable). Copies of the Mazda Pocket Paint Guide are available for order on Mazda e- | |
| Bulletin Number: 0901801 | |
| SUBJECT ON SERVICE INFORMATION FOR KEYLESS ENTRY SYSTEM. *SLC | |
| Bulletin Number: 09-019-18-3450 | |
| This service bulletin provides information regarding the proper use of the driver's floor mat to avoid any potential interference with the foot pedals. The following are possible causes of floor mat interference, which can be avoided with p | |
| Bulletin Number: 0902604 | |
| SPEEDOMETER REPLACEMENT PROCEDURE. *TT | |
| Bulletin Number: 09-027-14-2935 | |
| THIS SERVICE BULLETIN PROVIDES INFORMATION REGARDING THE PROPER USE OF THE DRIVERS FLOOR MAT TO AVOID ANY POTENTIAL INTERFERENCE WITH THE FOOT PEDALS. THE FOLLOWING ARE POSSIBLE CAUSES OF FLOOR MAT INTERFERENCE, WHICH CAN BE AVOIDED WITH P | |
| Bulletin Number: 09-034-14-2956 | |
| IN ACCORDANCE WITH FEDERAL REGULATIONS, FOLLOW THE PROCEDURE LISTED BELOW WHEN REPLACING A SPEEDOMETER.NOTE:MAZDA VEHICLES ARE MANUFACTURED WITH TAMPER-PROOF SPEEDOMETERS.WHEN A SPEEDOMETER IS REPLACED, THE NEW SPEEDOMETER WILL READ ZERO | |
| Bulletin Number: 09-034-18-3430 | |
| In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer's responsibility to co | |
| Bulletin Number: 09-034-18-3430a | |
| In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer's responsibility to co | |
| Bulletin Number: 09-035-17-3080 | |
| In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer?s responsibility to co | |
| Bulletin Number: SA-061-17 | |
| In an effort to achieve a higher level of Customer Experience and retain the value of Mazda's vehicles, MNAO Warranty Operations is© 2017 Mazda North American Operations, U.S.A. allowing all Mazda dealers to utilize a third party, SPECMO En | |
| Bulletin Number: SB-09-005-13 | |
| MAZDA: ON SOME VEHICLES, TO AVOID POTENTIAL INTERFERENCE OF FOOT PLACED ON PEDALS, INFORMATION IS PROVIDED REGARDING PROPER USE, AND PLACEMENT, OF DRIVER'S FLOOR MAT. VARIOUS MODELS AND MODEL YEARS. *PE | |
| 2002 MAZDA B-SERIES TRUCK | |
| Bulletin Number: 00-001-13-2748 | |
| MAZDA HAS DEVELOPED FACTORY RECOMMENDED SCHEDULED MAINTENANCE SERVICES THAT SUPPORT ALL MAJOR VEHICLE SYSTEMS. MAZDA RECOMMENDS DEALERS FOLLOW THE SCHEDULED MAINTENANCE TABLES AS CITED IN THE VEHICLE-SPECIFIC WORKSHOP MANUAL OR OWNERS MANU | |
| Bulletin Number: 00-001-13-2748A | |
| MAZDA HAS DEVELOPED FACTORY RECOMMENDED SCHEDULED MAINTENANCE SERVICES THAT SUPPORT ALL MAJOR VEHICLE SYSTEMS. MAZDA RECOMMENDS DEALERS FOLLOW THE SCHEDULED MAINTENANCE TABLES AS CITED IN THE VEHICLE-SPECIFIC WORKSHOP MANUAL OR OWNERS MANU | |
| Bulletin Number: 00-001-18-3446 | |
| Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle-specific workshop manual or owner's manu | |
| Bulletin Number: 00-001-18-3446a | |
| Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle- specific workshop manual or owner's man | |
| Bulletin Number: 00-001-19-3560 | |
| Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle- specific workshop manual or owner's man | |
| Bulletin Number: 00-002-14-2936 | |
| MAZDA NORTH AMERICAN OPERATIONS RECEIVED MANY REQUESTS FROM OUR DEALERS ASKING US TO APPROVE ADDITIONAL ON-CAR BRAKE LATHES AS AN OPTION FOR MNAO AUTHORIZED EQUIPMENT. DUE TO YOUR FEEDBACK AND AFTER EVALUATING A FEW ON-CAR BRAKE LATHES, WE | |
| Bulletin Number: 00-002-19-3561 | |
| Mazda North American Operations has approved an additional on-car brake lathe as an option for MNAO authorized equipment. The Pro-Cut On-Car Brake Lathe has been added to the MNAO authorized equipment program. NOTE: Accu-turn is still an ap | |
| Bulletin Number: 00-003-18-3480 | |
| Mazda North American Operations has approved an additional on-car brake lathe as an option for MNAOauthorized equipment. The Pro-Cut On-Car Brake Lathe has been added to the MNAO authorizedequipment program.NOTE: Accu-turn is still an appro | |
| Bulletin Number: 00-003-18-3480a | |
| Mazda North American Operations has approved an additional on-car brake lathe as an option for MNAO authorized equipment. The Pro-Cut On-Car Brake Lathe has been added to the MNAO authorized equipment program. NOTE: Accu-turn is still an ap | |
| Bulletin Number: 00-003-19-3583 | |
| In support of the new MRT distribution, Mazda will ship to dealers a new Dual Purpose Diagnostic Leak Detector beginning March, 2019. Training videos will be posted to MGSS shortly and Workshop Manual procedures will be revised gradually. | |
| Bulletin Number: 00-004/12 | |
| SUMMARY TO BE PROVIDED ON A FUTURE DATE. | |
| Bulletin Number: 00-004-12-2741 | |
| MAZDA HAS DEVELOPED FACTORY RECOMMENDED SCHEDULED MAINTENANCE SERVICES THAT SUPPORT ALL MAJOR VEHICLE SYSTEMS. MAZDA RECOMMENDS DEALERS FOLLOW THE SCHEDULED MAINTENANCE TABLES AS CITED IN THE VEHICLE-SPECIFIC WORKSHOP MANUAL OR OWNERS MANU | |
| Bulletin Number: 0004110 | |
| A LOUD ACCESSORY DRIVE BELT SQUEAL AND/OR CHIRP UNDER ALL DRIVING CONDITIONS ON CERTAIN VEHICLES BUILT PRIOR TO 09/18/03. REPAIR INFORMATION REVIEW1. 2004 MODELS ALSO INCLUDED. *TT | |
| Bulletin Number: 0004123 | |
| B28 AND LATER PCM CALIBRATION UPDATE INFORMATION. REPAIR INFORMATION REVIEW1. *TT | |
| Bulletin Number: 0004164 | |
| SPARK KNOCK, DETONATION OR PING CONDITION THROTTLE TIP-IN OR DURING STEADY STATE OPERATION AT OR NEAR WIDE OPEN THROTTLE ON CERTAIN VEHICLES EQUIPPED WITH 3.0L FFV/EFI ENGINES. REPAIR INFORMATION REVIEW1. *TT | |
| Bulletin Number: 00307 | |
| AVAILABILITY OF NON-REQUIRED TOOLS. *KB | |
| Bulletin Number: 01-001-19-3551 | |
| This service bulletin provides testing and charging procedures in order to promote proper battery maintenance, to deliver new vehicles with fully charged batteries, and to reduce unnecessary battery replacement cost. For new vehicles in sto | |
| Bulletin Number: 0100203 | |
| REDUCED CAPACITY OBD EVAPORATIVE EMISSION MONITOR CALIBRATION UPDATE. *TT | |
| Bulletin Number: 01-002-19-3552 | |
| The Mazda GR8-1291 is required for all warranty battery testing. If the Mazda GR8-1291 is not used, incorrect battery testing may result in unnecessary battery replacement. Use the following test procedures in this Service Bulletin to test | |
| Bulletin Number: 0100302 | |
| SUBJECT REGARDING RECOMMENDED ENGINE OIL. *SLC | |
| Bulletin Number: 0100303 | |
| FRONT CRANKSHAFT BOLT SERVICE WARNING. *TT | |
| Bulletin Number: 0100304 | |
| 3.0L LOWER ENGINE OIL LEAKS- DIAGNOSTIC-SERVICE TIP. *JB TT | |
| Bulletin Number: 0100402 | |
| SUBJECT REGARDING DIAGNOSTIC INFORMATION OF OXYGEN SENSOR, CATALYST EFFICIENCY AND FUEL SYSTEM MONITORS. *SLC | |
| Bulletin Number: 01-004-19-3558 | |
| On some vehicles, a sulfur smell or 'rotten egg' odor may be noticed coming from the exhaust system. The odor is usually noticed after a cold start, fast idle, extended periods of idling and full throttle acceleration. Sulfur smell is not a | |
| Bulletin Number: 0100503 | |
| MALFUNCTION INDICATOR LAMP (MIL) ON AND/OR DIAGNOSTIC TROUBLE CODES P0401, P0402, P1400 OR P1401 AND RUNS ROUGH, LACKS POWER, SURGE, POOR FUEL ECONOMY. *TT | |
| Bulletin Number: 0100703 | |
| ROUGH IDLE / ENGINE VIBRATION. *TT | |
| Bulletin Number: 01-008-18-3451 | |
| This service bulletin provides testing and charging procedures in order to promote proper battery maintenance, to deliver new vehicles with fully charged batteries, and to reduce unnecessary battery replacement cost. For new vehicles in sto | |
| Bulletin Number: 01-009-18-3452 | |
| The Mazda GR8-1291 is required for all warranty battery testing. If the Mazda GR8-1291 is not used, incorrect battery testing may result in unnecessary battery replacement. Use the following test procedures in this Service Bulletin to test | |
| Bulletin Number: 0101202 | |
| SUBJECT REGARDING 4.0L SOHC ENGINE - MALFUNCTION INDICATOR LAMP ILLUMINATED WITH DIAGNOSTIC TROUBLE CODE P0300. *SLC | |
| Bulletin Number: 0101502 | |
| SOME VEHICLES MAY EXHIBIT INOPERATIVE OR INACCURATE SPEEDOMETER, 4X4 LAMP ILLUMINATION, AND / OR DIAGNOSTIC TROUBLE CODES P1635 AND / OR P1639, P0602 PRESENT AFTER POWER TRAIN CONTROL MODULE (PCM) OR INSTRUMENT CLUSTER REPLACEMENT. *TT | |
| Bulletin Number: 0101504 | |
| MALFUNCTION INDICATOR LAMP (MIL) ON AND/OR DIAGNOSTIC TROUBLE CODES P0401, P0402, P1400 OR P1401 AND RUNS ROUGH, LACKS POWER, SURGE, POOR FUEL ECONOMY. *TT THIS BULLETIN REPLACES PREVIOUS BULLETIN DATED 4/26/04. *TT | |
| Bulletin Number: 0101505 | |
| FRONT CRANKSHAFT BOLT SERVICE WARNING. *MJ INCLUDING 2005 MAZDA B2300 AND 2005 MAZDA6. (UPDATE) *SC | |
| Bulletin Number: 0101505 | |
| FRONT CRANKSHAFT BOLT SERVICE WARNING. *SC | |
| Bulletin Number: 01-016-18-3522 | |
| On some vehicles, a sulfur smell or 'rotten egg' odor may be noticed coming from the exhaust system. The odor is usually noticed after a cold start, fast idle, extended periods of idling and full throttle acceleration. Sulfur smell is not a | |
| Bulletin Number: 0102206 | |
| FRONT CRANKSHAFT BOLT SERVICE WARNING. *NJ | |
| Bulletin Number: 0102402 | |
| SOME VEHICLES MAY EXHIBIT A PRIMARY TIMING CHAIN RATTLE NOISE BETWEEN 2000-3000 RPM. *TT | |
| Bulletin Number: 0102504 | |
| BATTERY TEST PROCEDURE REQUIREMENTS. *TT | |
| Bulletin Number: 0102604 | |
| ROUGH IDLE AND/OR 1800-2200 RPM BOOM/VIBRATION. *TT | |
| Bulletin Number: 0102903 | |
| MALFUNCTION INDICATOR LAMP (MIL) ON WITH OR WITHOUT ROUGH RUNNING, LACK OF POWER, SURGE OR POOR FUEL ECONOMY, ALONG WITH DIAGNOSTIC TROUBLE CODES (DTCS) P0401, P0402, P1400 OR P1401. *TT | |
| Bulletin Number: 0103003 | |
| A MALFUNCTION INDICATOR LAMP (MIL) WITH DIAGNOSTIC TROUBLE CODE (DTC) P0442, P0455, P0456, P0457 OR P1442 OR A CHECK FUEL CAP LIGHT ILLUMINATED WITH DTC P0457. VARIOUS MODELS INCLUDING THE 2005 TRIBUE AND 2004 B-SERIES. *TT | |
| Bulletin Number: 02-001-13-2752 | |
| SOME CUSTOMERS MAY COMPLAIN OF SIGNS OF OIL ON THE STRUTS OR SHOCK ABSORBERS. IN MOST CASES THE OIL THAT IS PRESENT IS NORMAL, AND A RESULT OF THE OIL THAT REMAINS ON THE SHAFT DURING THE NORMAL SWEEPING PROCESS OF THE SHAFT SEAL. FOLLOW TH | |
| Bulletin Number: 02-001-19-3550 | |
| Some customers may complain of signs of oil on the struts or shock absorbers. In most cases the oil that is present is normal, and a result of the oil that remains on the shaft during the normal sweeping process of the shaft seal. Follow th | |
| Bulletin Number: 02-006-18-3449 | |
| Some customers may complain of signs of oil on the struts or shock absorbers. In most cases the oil that is present is normal, and a result of the oil that remains on the shaft during the normal sweeping process of the shaft seal. Follow th | |
| Bulletin Number: 0300104 | |
| THUMP / CLUNK FROM DRIVELINE ON LIGHT ACCELERATION OR WHEN STOPPING. *TT | |
| Bulletin Number: 0300303 | |
| 4WD-B-SERIES-THUMPING NOISE/BUMPING SENSATION ACCERLERATING FROM A STOP. *MN *TT | |
| Bulletin Number: 0300303 | |
| THUMPING NOISE / BUMPING SENSATION ACCELERATING FROM A STOP. THIS BULLETIN ALSO SUPERSEDES 03-002/01R. *TT | |
| Bulletin Number: 0400504 | |
| GRABBING CONDITION FROM REAR DRUM BRAKES. *TT UPDATED 4/25/08. *NJ | |
| Bulletin Number: 0407 | |
| DPFE SENSOR APPLICATION REVISION. PARTS FLASH. *TT DPFE SENSOR WARRANTY EXTENSION PROGRAM - SPECIAL SERVICE PROGRAM (SSP) 59. *TT | |
| Bulletin Number: 05-001-16-3128 | |
| ALWAYS BE SURE TO USE THE CORRECT AUTOMATIC TRANSMISSION FLUID WHEN REPLACING ATF. USING THE WRONG ATF MAY CAUSE SHIFT QUALITY COMPLAINTS OR MAY EVEN DAMAGE THE TRANSMISSION.NOTE: ATF M-V (TYPE M5) IS NOT THE SAME FLUID AS MERCON®V OR MERC | |
| Bulletin Number: 05-001-18-3453 | |
| Always be sure to use the correct automatic transmission fluid when replacing ATF. Using the wrong ATF may cause shift quality complaints or may even damage the transmission. NOTE: ATF M-V (TYPE M5) IS NOT THE SAME FLUID AS MERCON®V OR MERC | |
| Bulletin Number: 05-002-13-2777 | |
| ALWAYS BE SURE TO USE THE CORRECT AUTOMATIC TRANSMISSION FLUID WHEN REPLACING ATF. USING THE WRONG ATF MAY CAUSE SHIFT QUALITY COMPLAINTS OR MAY EVEN DAMAGE THE TRANSMISSION.NOTE:ATF M-V (TYPE M5) IS NOT THE SAME FLUID AS MERCON®V OR MERCO | |
| Bulletin Number: 05-002-13-2777A | |
| ALWAYS BE SURE TO USE THE CORRECT AUTOMATIC TRANSMISSION FLUID WHEN REPLACING ATF. USING THE WRONG ATF MAY CAUSE SHIFT QUALITY COMPLAINTS OR MAY EVEN DAMAGE THE TRANSMISSION.NOTE:ATF M-V (TYPE M5) IS NOT THE SAME FLUID AS MERCON®V OR MERCO | |
| Bulletin Number: 0500402 | |
| SERVICE BULLETIN REGARDING A HOOTING, EEKING, OR MOANING NOISE COMING FROM THE CLUTCH WHEN SHIFTING INTO GEARS, WHILE THE ENGINE IS RUNNING. *TT | |
| Bulletin Number: 0500503 | |
| TRANSMISSION FLUID IN-LINE FILTER KIT - REPEAT REPAIRS OF TRANSMISSION - SERVICE TIPS. *TT | |
| Bulletin Number: 0500902 | |
| AUTOMATIC TRANMISSION SLIPPING, DELAYED ENGAGEMENT AND DIAGNOSTIC TROUBLE CODES P0732, P0733 OR P1762. *TT | |
| Bulletin Number: 0501002 | |
| SOME VEHICLES EQUIPPED WITH AUTOMATIC TRANSMISSION AND BUILT BETWEEN 01-JUN-2001 AND 31-MAR-2002 MAY EXHIBIT A FLUID LEAK AT A TRANSMISSION SERVO COVER (INTERMEDIATE AND/OR OVERDRIVE). *SLC | |
| Bulletin Number: 0600102 | |
| CLICKING NOISE WHILE TURNING THE STEERING WHEEL. *TT THIS BULLETIN REPLACES PREVIOUS BULLETIN 06-001-02 DATED 6/18/2002. *TT | |
| Bulletin Number: 06012004 | |
| PROGRAMMABLE MODULE INSTALLATION. ( 2004 MAZDA B SERIES) *JB | |
| Bulletin Number: 0800203 | |
| SAFETY BELT PRETENSIONER DIAGNOSTIC TROUBLE CODE B1877 / LFC 46 AND / OR DIAGNOSTIC TROUBLE CODE B1881 / LFC 47. *TT | |
| Bulletin Number: 0800306 | |
| NON GENUINE ACCESSORIES AFFECT AIR BAG OPERATION. *KB | |
| Bulletin Number: 0800405 | |
| SAFETY BELT RETRACTS TOO SLOWLY. MAZDA INCLUDING 2006 B-SERIES TRUCKS. *SC | |
| Bulletin Number: 08022004 | |
| DEALER NOTICE - SERVICE BULLETIN RELEASE. *TT | |
| Bulletin Number: 08042004 | |
| DEALER NOTICE - SERVICE BULLETIN RELEASE - 08/04/2004. *TT | |
| Bulletin Number: 09-002-19-3554 | |
| This service bulletin provides information regarding the proper use of the driver's floor mat to avoid anypotential interference with the foot pedals. The following are possible causes of floor mat interference,which can be avoided with pro | |
| Bulletin Number: 0900504 | |
| BED EXTENDER COMPONENT REPLACEMENT AND REMOVAL/ INSTALLATION INSTRUCTIONS. ALSO INCLUDING THE 2004 MAZDA B-SERIES.*MR | |
| Bulletin Number: 09-005-13-2781 | |
| THIS SERVICE BULLETIN PROVIDES INFORMATION REGARDING THE PROPER USE OF THE DRIVERS FLOOR MAT TO AVOID ANY POTEN-TIAL INTERFERENCE WITH THE FOOT PEDALS. THE FOLLOWING ARE POSSIBLE CAUSES OF FLOOR MAT INTERFERENCE, WHICH CAN BE AVOIDED WITH | |
| Bulletin Number: 09-005-19-3562 | |
| When encountering a vehicle with paint damage, refer to the "Mazda Pocket Paint Guide" to determine cause, prevention, remedy, and warranty coverage (if applicable). Copies of the Mazda Pocket Paint Guide are available for order on Mazda e- | |
| Bulletin Number: 09-009-19-3566 | |
| In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer's responsibility to co | |
| Bulletin Number: 0901202 | |
| PASSIVE ANTI-THEFT (PATS) DIAGNOSTIC SERVICE TIPS. *TT | |
| Bulletin Number: 0901202 | |
| SUBJECT REGARDING PASSIVE ANTI-THEFT (PATS) DIAGNOSTIC SERVICE TIPS. *TT | |
| Bulletin Number: 09-014-18-3443 | |
| When encountering a vehicle with paint damage, refer to the "Mazda Pocket Paint Guide" to determine cause, prevention, remedy, and warranty coverage (if applicable). | |
| Bulletin Number: 09-014-18-3443a | |
| When encountering a vehicle with paint damage, refer to the "Mazda Pocket Paint Guide" to determine cause, prevention, remedy, and warranty coverage (if applicable). Copies of the Mazda Pocket Paint Guide are available for order on Mazda e- | |
| Bulletin Number: 0901703 | |
| ELECTRICAL - WIRING - SOLDERING AND CRIMPING REPAIRS - SERVICE TIP. *TT | |
| Bulletin Number: 09-019-18-3450 | |
| This service bulletin provides information regarding the proper use of the driver's floor mat to avoid any potential interference with the foot pedals. The following are possible causes of floor mat interference, which can be avoided with p | |
| Bulletin Number: 0902004 | |
| EXTERIOR MIRROR GLASS AND MOTOR REPLACEMENT GUIDELINES. *MJ | |
| Bulletin Number: 0902203 | |
| STICKING OR BINDING IGNITION LOCK CYLINDER OR HIGH EFFORT WHEN TURNING IGNITION SWITCH. *TT | |
| Bulletin Number: 0902503 | |
| SERVICE WIRING HARNESS REPLACEMENT GUIDELINES - SERVICE TIPS - ELECTRICAL. *TT THIS BULLETIN REPLACES PREVIOUS BULLETIN 09-025-03 DATED 12/1/2003. *TT | |
| Bulletin Number: 0902604 | |
| SPEEDOMETER REPLACEMENT PROCEDURE. *TT | |
| Bulletin Number: 09-027-14-2935 | |
| THIS SERVICE BULLETIN PROVIDES INFORMATION REGARDING THE PROPER USE OF THE DRIVERS FLOOR MAT TO AVOID ANY POTENTIAL INTERFERENCE WITH THE FOOT PEDALS. THE FOLLOWING ARE POSSIBLE CAUSES OF FLOOR MAT INTERFERENCE, WHICH CAN BE AVOIDED WITH P | |
| Bulletin Number: 09-034-14-2956 | |
| IN ACCORDANCE WITH FEDERAL REGULATIONS, FOLLOW THE PROCEDURE LISTED BELOW WHEN REPLACING A SPEEDOMETER.NOTE:MAZDA VEHICLES ARE MANUFACTURED WITH TAMPER-PROOF SPEEDOMETERS.WHEN A SPEEDOMETER IS REPLACED, THE NEW SPEEDOMETER WILL READ ZERO | |
| Bulletin Number: 09-034-18-3430 | |
| In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer's responsibility to co | |
| Bulletin Number: 09-034-18-3430a | |
| In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer's responsibility to co | |
| Bulletin Number: 09-035-17-3080 | |
| In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer?s responsibility to co | |
| Bulletin Number: 53 | |
| FIRESTONE WILDERNESS AT TIRE REPLACEMENT SPP 53 PROGRAM END. MAZDA HAS REVISED THE EXPIRATION DATE FOR SPECIAL SERVICE PROGRAM (SSP) 53 TO SEPTEMBER 15, 2004. THIS CHANGE IS TO ENSURE THAT ALL CUSTOMERS HAVE AFFECTED TIRES REPLACED. *T | |
| Bulletin Number: 53 | |
| FIRESTONE WILDERNESS AT TIRE REPLACEMENT SSP 53 PROGRAM END. SSP 53 ENDS SEPTEMBER 13, 2004. THIS COMMUNICATION AND THE ATTACHMENTS PROVIDE UPDATED PROGRAM END INFORMATION. *TT | |
| Bulletin Number: 53 | |
| WILDERNESS AT TIRE REPLACEMENT PROGRAM END WITH ATTACHED UPDATES AND PROGRAM CHANGES. *TT | |
| Bulletin Number: 59 | |
| DELTA PRESSURE FEEDBACK EGR (DPFE) SENSOR WARRANTY EXTENSION PROGRAM. SPECIAL SERVICE PROGRAM (SSP) 59. *TT | |
| Bulletin Number: SA-061-17 | |
| In an effort to achieve a higher level of Customer Experience and retain the value of Mazda's vehicles, MNAO Warranty Operations is© 2017 Mazda North American Operations, U.S.A. allowing all Mazda dealers to utilize a third party, SPECMO En | |
| Bulletin Number: SB-09-005-13 | |
| MAZDA: ON SOME VEHICLES, TO AVOID POTENTIAL INTERFERENCE OF FOOT PLACED ON PEDALS, INFORMATION IS PROVIDED REGARDING PROPER USE, AND PLACEMENT, OF DRIVER'S FLOOR MAT. VARIOUS MODELS AND MODEL YEARS. *PE | |
| 2002 MAZDA MAZDA | |
| Bulletin Number: 0102902 | |
| SULFUR SMELL FROM EXHAUST SYSTEM. *TT | |
| 2002 MAZDA MIATA | |
| Bulletin Number: | |
| INFORMATION ON FUEL INJECTOR(S) REPLACEMENT GUIDELINES. *SLC | |
| Bulletin Number: 00-001-13-2748 | |
| MAZDA HAS DEVELOPED FACTORY RECOMMENDED SCHEDULED MAINTENANCE SERVICES THAT SUPPORT ALL MAJOR VEHICLE SYSTEMS. MAZDA RECOMMENDS DEALERS FOLLOW THE SCHEDULED MAINTENANCE TABLES AS CITED IN THE VEHICLE-SPECIFIC WORKSHOP MANUAL OR OWNERS MANU | |
| Bulletin Number: 00-001-13-2748A | |
| MAZDA HAS DEVELOPED FACTORY RECOMMENDED SCHEDULED MAINTENANCE SERVICES THAT SUPPORT ALL MAJOR VEHICLE SYSTEMS. MAZDA RECOMMENDS DEALERS FOLLOW THE SCHEDULED MAINTENANCE TABLES AS CITED IN THE VEHICLE-SPECIFIC WORKSHOP MANUAL OR OWNERS MANU | |
| Bulletin Number: 00-001-18-3446 | |
| Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle-specific workshop manual or owner's manu | |
| Bulletin Number: 00-001-18-3446a | |
| Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle- specific workshop manual or owner's man | |
| Bulletin Number: 00-001-19-3560 | |
| Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle- specific workshop manual or owner's man | |
| Bulletin Number: 00-002-14-2936 | |
| MAZDA NORTH AMERICAN OPERATIONS RECEIVED MANY REQUESTS FROM OUR DEALERS ASKING US TO APPROVE ADDITIONAL ON-CAR BRAKE LATHES AS AN OPTION FOR MNAO AUTHORIZED EQUIPMENT. DUE TO YOUR FEEDBACK AND AFTER EVALUATING A FEW ON-CAR BRAKE LATHES, WE | |
| Bulletin Number: 00-002-19-3561 | |
| Mazda North American Operations has approved an additional on-car brake lathe as an option for MNAO authorized equipment. The Pro-Cut On-Car Brake Lathe has been added to the MNAO authorized equipment program. NOTE: Accu-turn is still an ap | |
| Bulletin Number: 00-003-18-3480 | |
| Mazda North American Operations has approved an additional on-car brake lathe as an option for MNAOauthorized equipment. The Pro-Cut On-Car Brake Lathe has been added to the MNAO authorizedequipment program.NOTE: Accu-turn is still an appro | |
| Bulletin Number: 00-003-18-3480a | |
| Mazda North American Operations has approved an additional on-car brake lathe as an option for MNAO authorized equipment. The Pro-Cut On-Car Brake Lathe has been added to the MNAO authorized equipment program. NOTE: Accu-turn is still an ap | |
| Bulletin Number: 00-003-19-3583 | |
| In support of the new MRT distribution, Mazda will ship to dealers a new Dual Purpose Diagnostic Leak Detector beginning March, 2019. Training videos will be posted to MGSS shortly and Workshop Manual procedures will be revised gradually. | |
| Bulletin Number: 00-004/12 | |
| SUMMARY TO BE PROVIDED ON A FUTURE DATE. | |
| Bulletin Number: 00-004-12-2741 | |
| MAZDA HAS DEVELOPED FACTORY RECOMMENDED SCHEDULED MAINTENANCE SERVICES THAT SUPPORT ALL MAJOR VEHICLE SYSTEMS. MAZDA RECOMMENDS DEALERS FOLLOW THE SCHEDULED MAINTENANCE TABLES AS CITED IN THE VEHICLE-SPECIFIC WORKSHOP MANUAL OR OWNERS MANU | |
| Bulletin Number: 00204 | |
| EVAPORATIVE EMMISSIONS AND RECIVER ADAPTERS. *EH | |
| Bulletin Number: 00307 | |
| AVAILABILITY OF NON-REQUIRED TOOLS. *KB | |
| Bulletin Number: 01-001-19-3551 | |
| This service bulletin provides testing and charging procedures in order to promote proper battery maintenance, to deliver new vehicles with fully charged batteries, and to reduce unnecessary battery replacement cost. For new vehicles in sto | |
| Bulletin Number: 01-002-19-3552 | |
| The Mazda GR8-1291 is required for all warranty battery testing. If the Mazda GR8-1291 is not used, incorrect battery testing may result in unnecessary battery replacement. Use the following test procedures in this Service Bulletin to test | |
| Bulletin Number: 01-003-15-3014 | |
| USE THE FOLLOWING REPAIR PROCEDURE TO MINIMIZE THE NEED TO REPLACE THE CATALYST CONVERTER/EXHAUST PIPE WHEN REMOVING OXYGEN SENSORS AND/OR AIR FUEL RATIO SENSORS. | |
| Bulletin Number: 01-004-19-3558 | |
| On some vehicles, a sulfur smell or 'rotten egg' odor may be noticed coming from the exhaust system. The odor is usually noticed after a cold start, fast idle, extended periods of idling and full throttle acceleration. Sulfur smell is not a | |
| Bulletin Number: 0100602 | |
| SUBJECT REGARDING FUEL PUMP ASSEMBLY AND RELATED COMPONENT REPLACEMENT GUIDELINES. *SLC | |
| Bulletin Number: 01-008-18-3451 | |
| This service bulletin provides testing and charging procedures in order to promote proper battery maintenance, to deliver new vehicles with fully charged batteries, and to reduce unnecessary battery replacement cost. For new vehicles in sto | |
| Bulletin Number: 01-009-18-3452 | |
| The Mazda GR8-1291 is required for all warranty battery testing. If the Mazda GR8-1291 is not used, incorrect battery testing may result in unnecessary battery replacement. Use the following test procedures in this Service Bulletin to test | |
| Bulletin Number: 0101102 | |
| SUBJECT REGARDING DIFFICULT TO FILL FUEL/GAS PUMP SHUTTING OFF EARLY, REGARDING ALL 2001 MIATA AND 2002 MIATA WITH A VIN OF JM1 NB353 20 229638 AND LOWER, BUILT PRIOR TO MARCH 1, 2002. *SLC | |
| Bulletin Number: 01-016-18-3522 | |
| On some vehicles, a sulfur smell or 'rotten egg' odor may be noticed coming from the exhaust system. The odor is usually noticed after a cold start, fast idle, extended periods of idling and full throttle acceleration. Sulfur smell is not a | |
| Bulletin Number: 0102504 | |
| BATTERY TEST PROCEDURE REQUIREMENTS. *TT | |
| Bulletin Number: 0102506 | |
| MIL ON - P0012 SET - VARIABLE VALVE TIMING FAILURE. *TT | |
| Bulletin Number: 02-001-13-2752 | |
| SOME CUSTOMERS MAY COMPLAIN OF SIGNS OF OIL ON THE STRUTS OR SHOCK ABSORBERS. IN MOST CASES THE OIL THAT IS PRESENT IS NORMAL, AND A RESULT OF THE OIL THAT REMAINS ON THE SHAFT DURING THE NORMAL SWEEPING PROCESS OF THE SHAFT SEAL. FOLLOW TH | |
| Bulletin Number: 02-001-19-3550 | |
| Some customers may complain of signs of oil on the struts or shock absorbers. In most cases the oil that is present is normal, and a result of the oil that remains on the shaft during the normal sweeping process of the shaft seal. Follow th | |
| Bulletin Number: 02-006-18-3449 | |
| Some customers may complain of signs of oil on the struts or shock absorbers. In most cases the oil that is present is normal, and a result of the oil that remains on the shaft during the normal sweeping process of the shaft seal. Follow th | |
| Bulletin Number: 0500103 | |
| CLUTCH CHATTER DURING COLD TAKEOFF. ON VEHICLES WITH MANUAL TRANSMISSIONS BUILT PRIOR TO 4/10/2003. *TT | |
| Bulletin Number: 0500202 | |
| CLUTCH CHATTER DURING COLD TAKEOFF, FOR VEHICLES WITH MANUAL TRANSMISSIONS BUILT PRIOR TO 01-DEC-2001. *SLC | |
| Bulletin Number: 0500599 | |
| EMISSION RECALL 3505H - VEHICLES EQUIPPED WITH 1.8 LITER ENGINES, NON METHANE ORGANIC GAS (NMOG) EMISSION MAY EXCEED THE STANDARD DUE TO INSUFFICIENT ROBUSTNESS OF EMISSION CONTROL LOGIC AND CALIBRATION OF THE POWERTRAIN CONTROL MODULE (PCM | |
| Bulletin Number: 0501202 | |
| 6-SPEED MANUAL TRANSMISSION WILL NOT SHIFT INTO 5TH OR REVERSE GEARS. *TT | |
| Bulletin Number: 07-002-13-2842 | |
| A MUSTY/MILDEW TYPE ODOR MAY COME FROM THE VENTS WHEN THE AIR CONDITIONING (A/C) SYSTEM IS OPERATING. IT IS MOST NOTICEABLE WHEN THE A/C IS FIRST TURNED ON. THIS ODOR IS THE RESULT OF MOLD GROWTH IN THE A/C EVAPORATOR/COOLING UNIT WHICH IS | |
| Bulletin Number: 07-002-18-3432 | |
| A musty/mildew type odor may come from the vents when the air conditioning (A/C) system is operating. It is most noticeable when the A/C is first turned ON. This odor is the result of mold growth in the A/Cevaporator/cooling unit which is c | |
| Bulletin Number: 07-002-19-3616 | |
| A musty/mildew type odor may come from the vents when the air conditioning (A/C) system is operating. It is most noticeable when the A/C is first turned ON. This odor is the result of mold growth in the A/C evaporator/cooling unit which is | |
| Bulletin Number: 0700402 | |
| SUBJECT REGARDING AIR CONDITIONING MUSTY / MILDEW ODOR. *TT | |
| Bulletin Number: 0800306 | |
| NON GENUINE ACCESSORIES AFFECT AIR BAG OPERATION. *KB | |
| Bulletin Number: 0900104 | |
| PORT OR DEALER INSTALLED AUTO-DIMMING (ELECTRO-CHROMIC) MIRROR, WITH ELECTRONIC COMPASS, AMBIENT TEMPERATURE. *MR | |
| Bulletin Number: 09-001-16-3113 | |
| IF THE IMMOBILIZER UNIT LC62-67-5G2* OR DC69-67-5G2* NEEDS TO BE REPLACED WITH A NEW ONE, THESE PARTS ARE NO LONGER AVAILABLE. NEW ALTERNATIVE SERVICE PARTS KITS ARE NOW AVAILABLE, INCLUDING ALTERNATIVE IMMOBILIZER UNIT BJ3D-67-5G2L OR TC91 | |
| Bulletin Number: 09-002-19-3554 | |
| This service bulletin provides information regarding the proper use of the driver's floor mat to avoid anypotential interference with the foot pedals. The following are possible causes of floor mat interference,which can be avoided with pro | |
| Bulletin Number: 0900403 | |
| REAR WINDOW DEFROSTER GRID LINE REPAIR PROCEDURE. *TT | |
| Bulletin Number: 09-005-13-2781 | |
| THIS SERVICE BULLETIN PROVIDES INFORMATION REGARDING THE PROPER USE OF THE DRIVERS FLOOR MAT TO AVOID ANY POTEN-TIAL INTERFERENCE WITH THE FOOT PEDALS. THE FOLLOWING ARE POSSIBLE CAUSES OF FLOOR MAT INTERFERENCE, WHICH CAN BE AVOIDED WITH | |
| Bulletin Number: 09-005-19-3562 | |
| When encountering a vehicle with paint damage, refer to the "Mazda Pocket Paint Guide" to determine cause, prevention, remedy, and warranty coverage (if applicable). Copies of the Mazda Pocket Paint Guide are available for order on Mazda e- | |
| Bulletin Number: 0900603 | |
| POWER DOOR LOCKS WILL NOT LOCK WHEN ENGINE IS RUNNING. *TT | |
| Bulletin Number: 0900701 | |
| SUBJECT REGARDING AUDIO REMOVAL - ELECTRICAL SHORT/DAMAGE TO PRINTED CIRCUIT. *JG | |
| Bulletin Number: 0900802 | |
| SUBJECT REGARDING ACCESSORY CHROME FUEL DOOR NOT OPENING. *SLC | |
| Bulletin Number: 09-009-19-3566 | |
| In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer's responsibility to co | |
| Bulletin Number: 0901102 | |
| POWER DOOR LOCKS NOT LOCKING WHEN ENGINE IS RUNNING. *SLC | |
| Bulletin Number: 0901304 | |
| RATTLING NOISE FROM DRIVER'S OR PASSENGER'S DOOR WHEN DRIVING ON A ROUGH ROAD OR CLOSING THE DOOR. *TT | |
| Bulletin Number: 09-014-18-3443 | |
| When encountering a vehicle with paint damage, refer to the "Mazda Pocket Paint Guide" to determine cause, prevention, remedy, and warranty coverage (if applicable). | |
| Bulletin Number: 09-014-18-3443a | |
| When encountering a vehicle with paint damage, refer to the "Mazda Pocket Paint Guide" to determine cause, prevention, remedy, and warranty coverage (if applicable). Copies of the Mazda Pocket Paint Guide are available for order on Mazda e- | |
| Bulletin Number: 0901801 | |
| SUBJECT ON SERVICE INFORMATION FOR KEYLESS ENTRY SYSTEM. *SLC | |
| Bulletin Number: 09-019-18-3450 | |
| This service bulletin provides information regarding the proper use of the driver's floor mat to avoid any potential interference with the foot pedals. The following are possible causes of floor mat interference, which can be avoided with p | |
| Bulletin Number: 0902604 | |
| SPEEDOMETER REPLACEMENT PROCEDURE. *TT | |
| Bulletin Number: 09-027-14-2935 | |
| THIS SERVICE BULLETIN PROVIDES INFORMATION REGARDING THE PROPER USE OF THE DRIVERS FLOOR MAT TO AVOID ANY POTENTIAL INTERFERENCE WITH THE FOOT PEDALS. THE FOLLOWING ARE POSSIBLE CAUSES OF FLOOR MAT INTERFERENCE, WHICH CAN BE AVOIDED WITH P | |
| Bulletin Number: 09-034-14-2956 | |
| IN ACCORDANCE WITH FEDERAL REGULATIONS, FOLLOW THE PROCEDURE LISTED BELOW WHEN REPLACING A SPEEDOMETER.NOTE:MAZDA VEHICLES ARE MANUFACTURED WITH TAMPER-PROOF SPEEDOMETERS.WHEN A SPEEDOMETER IS REPLACED, THE NEW SPEEDOMETER WILL READ ZERO | |
| Bulletin Number: 09-034-18-3430 | |
| In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer's responsibility to co | |
| Bulletin Number: 09-034-18-3430a | |
| In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer's responsibility to co | |
| Bulletin Number: 09-035-17-3080 | |
| In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer?s responsibility to co | |
| Bulletin Number: 1100102 | |
| SUBJECT REGARDING VIL (VEHICLE INFORMATION LABEL) DELETION, MODELS PRODUCED FROM JANUARY 7,2002. *SLC | |
| Bulletin Number: 3505H | |
| EMISSION FAILURE - NON METHANE ORGANIC GAS (NMOG) EMISSION MAY EXCEED THE STANDARD DUE TO INSUFFICIENT ROBUSTNESS OF EMISSION CONTROL LOGIC AND CALIBRATION OF THE POWERTRAIN CONTROL MODULE (PCM) DURING THE ENGINE WARM-UP PERIOD AFTER COLD S | |
| Bulletin Number: MT-012-18 | |
| If a vehicle has body vibration or steering wheel shimmy while driving and the root cause is determined to be tire balance, re-balance the tires using a Hunter GSP9700 or equivalent balance machine. If your dealer does not have a GSP9700 or | |
| Bulletin Number: SA-048-18 | |
| Some vehicles may crank but not start due to a PCM/Immobilizer malfunction. If this happens, check the status of Recall 3505H. If Recall 3505H has NOT yet been completed, perform the following steps: a. Perform and close recall 3505H. b. O | |
| Bulletin Number: SA-061-17 | |
| In an effort to achieve a higher level of Customer Experience and retain the value of Mazda's vehicles, MNAO Warranty Operations is© 2017 Mazda North American Operations, U.S.A. allowing all Mazda dealers to utilize a third party, SPECMO En | |
| Bulletin Number: SB-09-005-13 | |
| MAZDA: ON SOME VEHICLES, TO AVOID POTENTIAL INTERFERENCE OF FOOT PLACED ON PEDALS, INFORMATION IS PROVIDED REGARDING PROPER USE, AND PLACEMENT, OF DRIVER'S FLOOR MAT. VARIOUS MODELS AND MODEL YEARS. *PE | |
| 2002 MAZDA MILLENIA | |
| Bulletin Number: | |
| INFORMATION ON FUEL INJECTOR(S) REPLACEMENT GUIDELINES. *SLC | |
| Bulletin Number: 00-001-13-2748 | |
| MAZDA HAS DEVELOPED FACTORY RECOMMENDED SCHEDULED MAINTENANCE SERVICES THAT SUPPORT ALL MAJOR VEHICLE SYSTEMS. MAZDA RECOMMENDS DEALERS FOLLOW THE SCHEDULED MAINTENANCE TABLES AS CITED IN THE VEHICLE-SPECIFIC WORKSHOP MANUAL OR OWNERS MANU | |
| Bulletin Number: 00-001-13-2748A | |
| MAZDA HAS DEVELOPED FACTORY RECOMMENDED SCHEDULED MAINTENANCE SERVICES THAT SUPPORT ALL MAJOR VEHICLE SYSTEMS. MAZDA RECOMMENDS DEALERS FOLLOW THE SCHEDULED MAINTENANCE TABLES AS CITED IN THE VEHICLE-SPECIFIC WORKSHOP MANUAL OR OWNERS MANU | |
| Bulletin Number: 00-001-18-3446 | |
| Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle-specific workshop manual or owner's manu | |
| Bulletin Number: 00-001-18-3446a | |
| Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle- specific workshop manual or owner's man | |
| Bulletin Number: 00-001-19-3560 | |
| Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle- specific workshop manual or owner's man | |
| Bulletin Number: 00-002-14-2936 | |
| MAZDA NORTH AMERICAN OPERATIONS RECEIVED MANY REQUESTS FROM OUR DEALERS ASKING US TO APPROVE ADDITIONAL ON-CAR BRAKE LATHES AS AN OPTION FOR MNAO AUTHORIZED EQUIPMENT. DUE TO YOUR FEEDBACK AND AFTER EVALUATING A FEW ON-CAR BRAKE LATHES, WE | |
| Bulletin Number: 00-002-19-3561 | |
| Mazda North American Operations has approved an additional on-car brake lathe as an option for MNAO authorized equipment. The Pro-Cut On-Car Brake Lathe has been added to the MNAO authorized equipment program. NOTE: Accu-turn is still an ap | |
| Bulletin Number: 00-003-18-3480 | |
| Mazda North American Operations has approved an additional on-car brake lathe as an option for MNAOauthorized equipment. The Pro-Cut On-Car Brake Lathe has been added to the MNAO authorizedequipment program.NOTE: Accu-turn is still an appro | |
| Bulletin Number: 00-003-18-3480a | |
| Mazda North American Operations has approved an additional on-car brake lathe as an option for MNAO authorized equipment. The Pro-Cut On-Car Brake Lathe has been added to the MNAO authorized equipment program. NOTE: Accu-turn is still an ap | |
| Bulletin Number: 00-004-12-2741 | |
| MAZDA HAS DEVELOPED FACTORY RECOMMENDED SCHEDULED MAINTENANCE SERVICES THAT SUPPORT ALL MAJOR VEHICLE SYSTEMS. MAZDA RECOMMENDS DEALERS FOLLOW THE SCHEDULED MAINTENANCE TABLES AS CITED IN THE VEHICLE-SPECIFIC WORKSHOP MANUAL OR OWNERS MANU | |
| Bulletin Number: 00-004-16-3237 | |
| RAISING A VEHICLE WITH A JACK CAN BE DANGEROUS IF NOT DONE PROPERLY. THE VEHICLE CAN SLIP OFF THE JACK AND SERI-OUSLY INJURE SOMEONE. IN THIS SERVICE INFORMATION, SOME IMPORTANT WARNINGS AND CAUTIONS HAVE BEEN TAKEN FROM THE OWNERS MANUAL. | |
| Bulletin Number: 00204 | |
| EVAPORATIVE EMMISSIONS AND RECIVER ADAPTERS. *EH | |
| Bulletin Number: 00307 | |
| AVAILABILITY OF NON-REQUIRED TOOLS. *KB | |
| Bulletin Number: 01-001-19-3551 | |
| This service bulletin provides testing and charging procedures in order to promote proper battery maintenance, to deliver new vehicles with fully charged batteries, and to reduce unnecessary battery replacement cost. For new vehicles in sto | |
| Bulletin Number: 01-002-19-3552 | |
| The Mazda GR8-1291 is required for all warranty battery testing. If the Mazda GR8-1291 is not used, incorrect battery testing may result in unnecessary battery replacement. Use the following test procedures in this Service Bulletin to test | |
| Bulletin Number: 01-003-15-3014 | |
| USE THE FOLLOWING REPAIR PROCEDURE TO MINIMIZE THE NEED TO REPLACE THE CATALYST CONVERTER/EXHAUST PIPE WHEN REMOVING OXYGEN SENSORS AND/OR AIR FUEL RATIO SENSORS. | |
| Bulletin Number: 01-004-19-3558 | |
| On some vehicles, a sulfur smell or 'rotten egg' odor may be noticed coming from the exhaust system. The odor is usually noticed after a cold start, fast idle, extended periods of idling and full throttle acceleration. Sulfur smell is not a | |
| Bulletin Number: 0100504 | |
| MALFUNCTION INDICATOR LAMP ILLUMINATION WITH DIAGNOSTIC TROUBLE CODE (DTC) P0325. *TT | |
| Bulletin Number: 0100602 | |
| SUBJECT REGARDING FUEL PUMP ASSEMBLY AND RELATED COMPONENT REPLACEMENT GUIDELINES. *SLC | |
| Bulletin Number: 0100701R | |
| EXPERIENCING MALFUNCTION INDICATOR LAMP ILLUMINATION OCCURING WITH DIAGNOSTIC TROUBLE CODE P1455 STORED IN MEMORY. ALSO, THE VEHICLE'S LOW FUEL LIGHT MAY ILLUMINATE PREMATURELY AND NOT ALLOW MORE THAN 8 TO 12 GALLONS OF FUEL TO BE PUMPED | |
| Bulletin Number: 01-008-18-3451 | |
| This service bulletin provides testing and charging procedures in order to promote proper battery maintenance, to deliver new vehicles with fully charged batteries, and to reduce unnecessary battery replacement cost. For new vehicles in sto | |
| Bulletin Number: 01-009-18-3452 | |
| The Mazda GR8-1291 is required for all warranty battery testing. If the Mazda GR8-1291 is not used, incorrect battery testing may result in unnecessary battery replacement. Use the following test procedures in this Service Bulletin to test | |
| Bulletin Number: 0101003 | |
| MALFUNCTION INDICATOR LAMP ILLUMINATION WITH DIAGNOSTIC TROUBLE CODE P0325 STORED. *TT | |
| Bulletin Number: 0101602 | |
| SUBJECT REGARDING CAMSHAFT INSTALLATION INFORMATION. *TT | |
| Bulletin Number: 01-016-18-3522 | |
| On some vehicles, a sulfur smell or 'rotten egg' odor may be noticed coming from the exhaust system. The odor is usually noticed after a cold start, fast idle, extended periods of idling and full throttle acceleration. Sulfur smell is not a | |
| Bulletin Number: 0102504 | |
| BATTERY TEST PROCEDURE REQUIREMENTS. *TT | |
| Bulletin Number: 0102702 | |
| MALFUNCTION INDICATOR LAMP ILLUMINATION WITH DIAGNOSTIC TROUBLE CODE P0300 TO P0306. *TT | |
| Bulletin Number: 02-001-13-2752 | |
| SOME CUSTOMERS MAY COMPLAIN OF SIGNS OF OIL ON THE STRUTS OR SHOCK ABSORBERS. IN MOST CASES THE OIL THAT IS PRESENT IS NORMAL, AND A RESULT OF THE OIL THAT REMAINS ON THE SHAFT DURING THE NORMAL SWEEPING PROCESS OF THE SHAFT SEAL. FOLLOW TH | |
| Bulletin Number: 02-001-19-3550 | |
| Some customers may complain of signs of oil on the struts or shock absorbers. In most cases the oil that is present is normal, and a result of the oil that remains on the shaft during the normal sweeping process of the shaft seal. Follow th | |
| Bulletin Number: 02-006-18-3449 | |
| Some customers may complain of signs of oil on the struts or shock absorbers. In most cases the oil that is present is normal, and a result of the oil that remains on the shaft during the normal sweeping process of the shaft seal. Follow th | |
| Bulletin Number: 0600101R1 | |
| SUBJECT REGARDING TILT STEERING WHEEL INOPERATIVE. *JG | |
| Bulletin Number: 0600103 | |
| TILT STEERING WHEEL STUCK IN UP POSITION. *TT | |
| Bulletin Number: 0700102 | |
| CUSTOMERS MAY COMPLAIN OF WATER LEAKING FROM UNDER THE PASSENGER ISDE DASHBOARD NEAR THE FOOTWELL AREA. *SLC | |
| Bulletin Number: 0700102R | |
| COOLING UNIT ASSEMBLY LEAKS WATER. *TT | |
| Bulletin Number: 07-002-13-2842 | |
| A MUSTY/MILDEW TYPE ODOR MAY COME FROM THE VENTS WHEN THE AIR CONDITIONING (A/C) SYSTEM IS OPERATING. IT IS MOST NOTICEABLE WHEN THE A/C IS FIRST TURNED ON. THIS ODOR IS THE RESULT OF MOLD GROWTH IN THE A/C EVAPORATOR/COOLING UNIT WHICH IS | |
| Bulletin Number: 07-002-18-3432 | |
| A musty/mildew type odor may come from the vents when the air conditioning (A/C) system is operating. It is most noticeable when the A/C is first turned ON. This odor is the result of mold growth in the A/Cevaporator/cooling unit which is c | |
| Bulletin Number: 07-002-19-3616 | |
| A musty/mildew type odor may come from the vents when the air conditioning (A/C) system is operating. It is most noticeable when the A/C is first turned ON. This odor is the result of mold growth in the A/C evaporator/cooling unit which is | |
| Bulletin Number: 0700402 | |
| SUBJECT REGARDING AIR CONDITIONING MUSTY / MILDEW ODOR. *TT | |
| Bulletin Number: 0800106 | |
| AIRBAG WARNING LIGHT COMES ON - DTC 26 AND/OR DTC 37. *TT | |
| Bulletin Number: 0800306 | |
| NON GENUINE ACCESSORIES AFFECT AIR BAG OPERATION. *KB | |
| Bulletin Number: 0900104 | |
| PORT OR DEALER INSTALLED AUTO-DIMMING (ELECTRO-CHROMIC) MIRROR, WITH ELECTRONIC COMPASS, AMBIENT TEMPERATURE. *MR | |
| Bulletin Number: 09-002-19-3554 | |
| This service bulletin provides information regarding the proper use of the driver's floor mat to avoid anypotential interference with the foot pedals. The following are possible causes of floor mat interference,which can be avoided with pro | |
| Bulletin Number: 0900403 | |
| REAR WINDOW DEFROSTER GRID LINE REPAIR PROCEDURE. *TT | |
| Bulletin Number: 09-005-13-2781 | |
| THIS SERVICE BULLETIN PROVIDES INFORMATION REGARDING THE PROPER USE OF THE DRIVERS FLOOR MAT TO AVOID ANY POTEN-TIAL INTERFERENCE WITH THE FOOT PEDALS. THE FOLLOWING ARE POSSIBLE CAUSES OF FLOOR MAT INTERFERENCE, WHICH CAN BE AVOIDED WITH | |
| Bulletin Number: 09-005-19-3562 | |
| When encountering a vehicle with paint damage, refer to the "Mazda Pocket Paint Guide" to determine cause, prevention, remedy, and warranty coverage (if applicable). Copies of the Mazda Pocket Paint Guide are available for order on Mazda e- | |
| Bulletin Number: 0900701 | |
| SUBJECT REGARDING AUDIO REMOVAL - ELECTRICAL SHORT/DAMAGE TO PRINTED CIRCUIT. *JG | |
| Bulletin Number: 09-009-19-3566 | |
| In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer's responsibility to co | |
| Bulletin Number: 09-014-18-3443 | |
| When encountering a vehicle with paint damage, refer to the "Mazda Pocket Paint Guide" to determine cause, prevention, remedy, and warranty coverage (if applicable). | |
| Bulletin Number: 09-014-18-3443a | |
| When encountering a vehicle with paint damage, refer to the "Mazda Pocket Paint Guide" to determine cause, prevention, remedy, and warranty coverage (if applicable). Copies of the Mazda Pocket Paint Guide are available for order on Mazda e- | |
| Bulletin Number: 0901801 | |
| SUBJECT ON SERVICE INFORMATION FOR KEYLESS ENTRY SYSTEM. *SLC | |
| Bulletin Number: 09-019-18-3450 | |
| This service bulletin provides information regarding the proper use of the driver's floor mat to avoid any potential interference with the foot pedals. The following are possible causes of floor mat interference, which can be avoided with p | |
| Bulletin Number: 0902604 | |
| SPEEDOMETER REPLACEMENT PROCEDURE. *TT | |
| Bulletin Number: 09-027-14-2935 | |
| THIS SERVICE BULLETIN PROVIDES INFORMATION REGARDING THE PROPER USE OF THE DRIVERS FLOOR MAT TO AVOID ANY POTENTIAL INTERFERENCE WITH THE FOOT PEDALS. THE FOLLOWING ARE POSSIBLE CAUSES OF FLOOR MAT INTERFERENCE, WHICH CAN BE AVOIDED WITH P | |
| Bulletin Number: 09-034-14-2956 | |
| IN ACCORDANCE WITH FEDERAL REGULATIONS, FOLLOW THE PROCEDURE LISTED BELOW WHEN REPLACING A SPEEDOMETER.NOTE:MAZDA VEHICLES ARE MANUFACTURED WITH TAMPER-PROOF SPEEDOMETERS.WHEN A SPEEDOMETER IS REPLACED, THE NEW SPEEDOMETER WILL READ ZERO | |
| Bulletin Number: 09-034-18-3430 | |
| In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer's responsibility to co | |
| Bulletin Number: 09-034-18-3430a | |
| In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer's responsibility to co | |
| Bulletin Number: 09-035-17-3080 | |
| In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer?s responsibility to co | |
| Bulletin Number: 1100102 | |
| SUBJECT REGARDING VIL (VEHICLE INFORMATION LABEL) DELETION, MODELS PRODUCED FROM JANUARY 7,2002. *SLC | |
| Bulletin Number: MT-012-18 | |
| If a vehicle has body vibration or steering wheel shimmy while driving and the root cause is determined to be tire balance, re-balance the tires using a Hunter GSP9700 or equivalent balance machine. If your dealer does not have a GSP9700 or | |
| Bulletin Number: SA-061-17 | |
| In an effort to achieve a higher level of Customer Experience and retain the value of Mazda's vehicles, MNAO Warranty Operations is© 2017 Mazda North American Operations, U.S.A. allowing all Mazda dealers to utilize a third party, SPECMO En | |
| Bulletin Number: SB-09-005-13 | |
| MAZDA: ON SOME VEHICLES, TO AVOID POTENTIAL INTERFERENCE OF FOOT PLACED ON PEDALS, INFORMATION IS PROVIDED REGARDING PROPER USE, AND PLACEMENT, OF DRIVER'S FLOOR MAT. VARIOUS MODELS AND MODEL YEARS. *PE | |
| 2002 MAZDA MPV | |
| Bulletin Number: | |
| INFORMATION ON FUEL INJECTOR(S) REPLACEMENT GUIDELINES. *SLC | |
| Bulletin Number: 00-001-13-2748 | |
| MAZDA HAS DEVELOPED FACTORY RECOMMENDED SCHEDULED MAINTENANCE SERVICES THAT SUPPORT ALL MAJOR VEHICLE SYSTEMS. MAZDA RECOMMENDS DEALERS FOLLOW THE SCHEDULED MAINTENANCE TABLES AS CITED IN THE VEHICLE-SPECIFIC WORKSHOP MANUAL OR OWNERS MANU | |
| Bulletin Number: 00-001-13-2748A | |
| MAZDA HAS DEVELOPED FACTORY RECOMMENDED SCHEDULED MAINTENANCE SERVICES THAT SUPPORT ALL MAJOR VEHICLE SYSTEMS. MAZDA RECOMMENDS DEALERS FOLLOW THE SCHEDULED MAINTENANCE TABLES AS CITED IN THE VEHICLE-SPECIFIC WORKSHOP MANUAL OR OWNERS MANU | |
| Bulletin Number: 00-001-18-3446 | |
| Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle-specific workshop manual or owner's manu | |
| Bulletin Number: 00-001-18-3446a | |
| Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle- specific workshop manual or owner's man | |
| Bulletin Number: 00-001-19-3560 | |
| Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle- specific workshop manual or owner's man | |
| Bulletin Number: 00-002-14-2936 | |
| MAZDA NORTH AMERICAN OPERATIONS RECEIVED MANY REQUESTS FROM OUR DEALERS ASKING US TO APPROVE ADDITIONAL ON-CAR BRAKE LATHES AS AN OPTION FOR MNAO AUTHORIZED EQUIPMENT. DUE TO YOUR FEEDBACK AND AFTER EVALUATING A FEW ON-CAR BRAKE LATHES, WE | |
| Bulletin Number: 00-002-19-3561 | |
| Mazda North American Operations has approved an additional on-car brake lathe as an option for MNAO authorized equipment. The Pro-Cut On-Car Brake Lathe has been added to the MNAO authorized equipment program. NOTE: Accu-turn is still an ap | |
| Bulletin Number: 00-003-18-3480 | |
| Mazda North American Operations has approved an additional on-car brake lathe as an option for MNAOauthorized equipment. The Pro-Cut On-Car Brake Lathe has been added to the MNAO authorizedequipment program.NOTE: Accu-turn is still an appro | |
| Bulletin Number: 00-003-18-3480a | |
| Mazda North American Operations has approved an additional on-car brake lathe as an option for MNAO authorized equipment. The Pro-Cut On-Car Brake Lathe has been added to the MNAO authorized equipment program. NOTE: Accu-turn is still an ap | |
| Bulletin Number: 00-004/12 | |
| SUMMARY TO BE PROVIDED ON A FUTURE DATE. | |
| Bulletin Number: 00-004-12-2741 | |
| MAZDA HAS DEVELOPED FACTORY RECOMMENDED SCHEDULED MAINTENANCE SERVICES THAT SUPPORT ALL MAJOR VEHICLE SYSTEMS. MAZDA RECOMMENDS DEALERS FOLLOW THE SCHEDULED MAINTENANCE TABLES AS CITED IN THE VEHICLE-SPECIFIC WORKSHOP MANUAL OR OWNERS MANU | |
| Bulletin Number: 00-004-16-3237 | |
| RAISING A VEHICLE WITH A JACK CAN BE DANGEROUS IF NOT DONE PROPERLY. THE VEHICLE CAN SLIP OFF THE JACK AND SERI-OUSLY INJURE SOMEONE. IN THIS SERVICE INFORMATION, SOME IMPORTANT WARNINGS AND CAUTIONS HAVE BEEN TAKEN FROM THE OWNERS MANUAL. | |
| Bulletin Number: 0004180 | |
| B29 AND LATER POWERTRAIN CONTROL MODULE (PCM) CALIBRATION UPDATE INFORMATION. REPAIR INFORMATION REVIEW1. *TT | |
| Bulletin Number: 00204 | |
| EVAPORATIVE EMMISSIONS AND RECIVER ADAPTERS. *EH | |
| Bulletin Number: 00307 | |
| AVAILABILITY OF NON-REQUIRED TOOLS. *KB | |
| Bulletin Number: 01-001-19-3551 | |
| This service bulletin provides testing and charging procedures in order to promote proper battery maintenance, to deliver new vehicles with fully charged batteries, and to reduce unnecessary battery replacement cost. For new vehicles in sto | |
| Bulletin Number: 01-002-19-3552 | |
| The Mazda GR8-1291 is required for all warranty battery testing. If the Mazda GR8-1291 is not used, incorrect battery testing may result in unnecessary battery replacement. Use the following test procedures in this Service Bulletin to test | |
| Bulletin Number: 0100302 | |
| SUBJECT REGARDING RECOMMENDED ENGINE OIL. *SLC | |
| Bulletin Number: 01-003-15-3014 | |
| USE THE FOLLOWING REPAIR PROCEDURE TO MINIMIZE THE NEED TO REPLACE THE CATALYST CONVERTER/EXHAUST PIPE WHEN REMOVING OXYGEN SENSORS AND/OR AIR FUEL RATIO SENSORS. | |
| Bulletin Number: 01-004-19-3558 | |
| On some vehicles, a sulfur smell or 'rotten egg' odor may be noticed coming from the exhaust system. The odor is usually noticed after a cold start, fast idle, extended periods of idling and full throttle acceleration. Sulfur smell is not a | |
| Bulletin Number: 0100602 | |
| SUBJECT REGARDING FUEL PUMP ASSEMBLY AND RELATED COMPONENT REPLACEMENT GUIDELINES. *SLC | |
| Bulletin Number: 01-008-18-3451 | |
| This service bulletin provides testing and charging procedures in order to promote proper battery maintenance, to deliver new vehicles with fully charged batteries, and to reduce unnecessary battery replacement cost. For new vehicles in sto | |
| Bulletin Number: 01-009-18-3452 | |
| The Mazda GR8-1291 is required for all warranty battery testing. If the Mazda GR8-1291 is not used, incorrect battery testing may result in unnecessary battery replacement. Use the following test procedures in this Service Bulletin to test | |
| Bulletin Number: 010104 | |
| IT IS POSSIBLE THAT THE SOLDERING STRENGTH ON A TERMINAL IN THE FAN CONTROL MODULE MAY BE INSUFFICIENT, CAUSING A CRACK DURING USE. FAN CONTROL MODULE SPECIAL SERVICE PROGRAM (SSP)60. *NM | |
| Bulletin Number: 0101203 | |
| TAPPET (TICK) NOISE FROM ENGINE. *TT | |
| Bulletin Number: 01-016-18-3522 | |
| On some vehicles, a sulfur smell or 'rotten egg' odor may be noticed coming from the exhaust system. The odor is usually noticed after a cold start, fast idle, extended periods of idling and full throttle acceleration. Sulfur smell is not a | |
| Bulletin Number: 0101904 | |
| MALFUNCTION INDICATOR LAMP (MIL) ILLUMINATION WITH DIAGNOSTIC TROUBLE CODES (DTCS) P2404 / P0446. *TT | |
| Bulletin Number: 0102103 | |
| METAL SNAP OR POPPING NOISE FROM ENGINE. *EH | |
| Bulletin Number: 0102103 | |
| STICK / SLIP NOISE FROM ENGINE. *TT | |
| Bulletin Number: 0102502 | |
| MALFUNCTION INDICATOR LIGHT ILLUMINATED AND DIAGNOSTIC TROUBLE CODES P0340, P0503, P0443, P0660 OR P1487 STORED. *TT | |
| Bulletin Number: 0102504 | |
| BATTERY TEST PROCEDURE REQUIREMENTS. *TT | |
| Bulletin Number: 0103305 | |
| ENGINE NO START IN EXTREME COLD WEATHER. *TT | |
| Bulletin Number: 0103504 | |
| ENGINE PINGING DURING ACCELERATION AND/OR LIGHT THROTTLE CRUISING. *TT | |
| Bulletin Number: 0105406 | |
| ENGINE HARD TO START, RUNS ROUGH. *KB | |
| Bulletin Number: 02-001-13-2752 | |
| SOME CUSTOMERS MAY COMPLAIN OF SIGNS OF OIL ON THE STRUTS OR SHOCK ABSORBERS. IN MOST CASES THE OIL THAT IS PRESENT IS NORMAL, AND A RESULT OF THE OIL THAT REMAINS ON THE SHAFT DURING THE NORMAL SWEEPING PROCESS OF THE SHAFT SEAL. FOLLOW TH | |
| Bulletin Number: 02-001-19-3550 | |
| Some customers may complain of signs of oil on the struts or shock absorbers. In most cases the oil that is present is normal, and a result of the oil that remains on the shaft during the normal sweeping process of the shaft seal. Follow th | |
| Bulletin Number: 02-006-18-3449 | |
| Some customers may complain of signs of oil on the struts or shock absorbers. In most cases the oil that is present is normal, and a result of the oil that remains on the shaft during the normal sweeping process of the shaft seal. Follow th | |
| Bulletin Number: 0400103 | |
| FRONT BRAKE CLUNKING NOISE. *TT | |
| Bulletin Number: 0500104 | |
| AUTOMATIC TRANSAXLE MAY EXHIBIT SHIFT SHOCK WHILE THE ENGINE WARMS FROM COLD TO NORMAL. *TT | |
| Bulletin Number: 0500105 | |
| O/D OFF INDICATOR LIGHT FLASHING / MALFUNCTION INDICATOR LAMP (MIL) WITH DIAGNOSTIC TROUBLE CODE (DTC) P0706. *TT | |
| Bulletin Number: 0500603 | |
| MALFUNCTION INDICATOR LAMP (MIL) ILLUMINATION WITH DIAGNOSTIC TROUBLE CODE (DTC) P0706. THIS BULLETIN SUPERSEDES 01-023/03 ISSUED 10/15/03. *TT | |
| Bulletin Number: 05-007-14-2918 | |
| THE VEHICLES AUTOMATIC TRANSAXLE (ATX) MAY EXHIBIT SHIFT SHOCK WHILE THE ENGINE WARMS FROM COLD TO NORMAL OPERATING TEMPERATURE. THE SYMPTOM IS INTERMITTENT, IT DOES NOT OCCUR ALL THE TIME. THE SHIFT SHOCK USUALLY OCCURS DURING 1-2 OR 2-3 | |
| Bulletin Number: 0501102R | |
| MALFUNCTION INDICATOR LIGHT IS ON AND/OR THE O/D OFF LIGHT IS FLASHING WITH DIAGNOSTIC TROUBLE CODE P0757 STORED. *TT | |
| Bulletin Number: 0700104 | |
| AIR TEMPERATURE OUTPUT DIFFERENCE BETWEEN CENTER DASH VENTS. *MR THIS BULLETIN REPLACED THE PREVIOUS BULLETIN ISSUED ON 02/12/04. *TT | |
| Bulletin Number: 07-002-13-2842 | |
| A MUSTY/MILDEW TYPE ODOR MAY COME FROM THE VENTS WHEN THE AIR CONDITIONING (A/C) SYSTEM IS OPERATING. IT IS MOST NOTICEABLE WHEN THE A/C IS FIRST TURNED ON. THIS ODOR IS THE RESULT OF MOLD GROWTH IN THE A/C EVAPORATOR/COOLING UNIT WHICH IS | |
| Bulletin Number: 07-002-18-3432 | |
| A musty/mildew type odor may come from the vents when the air conditioning (A/C) system is operating. It is most noticeable when the A/C is first turned ON. This odor is the result of mold growth in the A/Cevaporator/cooling unit which is c | |
| Bulletin Number: 07-002-19-3616 | |
| A musty/mildew type odor may come from the vents when the air conditioning (A/C) system is operating. It is most noticeable when the A/C is first turned ON. This odor is the result of mold growth in the A/C evaporator/cooling unit which is | |
| Bulletin Number: 0700304 | |
| COOLANT SEEPAGE FROM REAR HEATER PIPE. *TT | |
| Bulletin Number: 0700402 | |
| SUBJECT REGARDING AIR CONDITIONING MUSTY / MILDEW ODOR. *TT | |
| Bulletin Number: 0700403 | |
| CORROSION ON REAR HEATER PIPE. *PH WARRANTY EXTENSION. *TT | |
| Bulletin Number: 0800306 | |
| NON GENUINE ACCESSORIES AFFECT AIR BAG OPERATION. *KB | |
| Bulletin Number: 08262004 | |
| DEALER NOTICE - SERVICE BULLETIN RELEASE - 08/26/2004. *TT | |
| Bulletin Number: 0900104 | |
| PORT OR DEALER INSTALLED AUTO-DIMMING (ELECTRO-CHROMIC) MIRROR, WITH ELECTRONIC COMPASS, AMBIENT TEMPERATURE. *MR | |
| Bulletin Number: 09-001/16 | |
| SUMMARY TO BE PROVIDED ON A FUTURE DATE. | |
| Bulletin Number: 09-001-16-3113 | |
| IF THE IMMOBILIZER UNIT LC62-67-5G2* OR DC69-67-5G2* NEEDS TO BE REPLACED WITH A NEW ONE, THESE PARTS ARE NO LONGER AVAILABLE. NEW ALTERNATIVE SERVICE PARTS KITS ARE NOW AVAILABLE, INCLUDING ALTERNATIVE IMMOBILIZER UNIT BJ3D-67-5G2L OR TC91 | |
| Bulletin Number: 09-002-19-3554 | |
| This service bulletin provides information regarding the proper use of the driver's floor mat to avoid anypotential interference with the foot pedals. The following are possible causes of floor mat interference,which can be avoided with pro | |
| Bulletin Number: 0900403 | |
| REAR WINDOW DEFROSTER GRID LINE REPAIR PROCEDURE. *TT | |
| Bulletin Number: 09-005-13-2781 | |
| THIS SERVICE BULLETIN PROVIDES INFORMATION REGARDING THE PROPER USE OF THE DRIVERS FLOOR MAT TO AVOID ANY POTEN-TIAL INTERFERENCE WITH THE FOOT PEDALS. THE FOLLOWING ARE POSSIBLE CAUSES OF FLOOR MAT INTERFERENCE, WHICH CAN BE AVOIDED WITH | |
| Bulletin Number: 09-005-19-3562 | |
| When encountering a vehicle with paint damage, refer to the "Mazda Pocket Paint Guide" to determine cause, prevention, remedy, and warranty coverage (if applicable). Copies of the Mazda Pocket Paint Guide are available for order on Mazda e- | |
| Bulletin Number: 09-009-19-3566 | |
| In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer's responsibility to co | |
| Bulletin Number: 0901105 | |
| POWER WINDOWS INOPERATIVE - BLOWN FUSE. TO INCLUDE 2006 MAZDA MPV. *TT | |
| Bulletin Number: 0901402 | |
| ACCESSORY REAR CARGO NET HOOKS DETACH. *TT | |
| Bulletin Number: 0901405 | |
| RATTLING NOISE FROM 2ND-ROW SEATS. *SC | |
| Bulletin Number: 09-014-18-3443 | |
| When encountering a vehicle with paint damage, refer to the "Mazda Pocket Paint Guide" to determine cause, prevention, remedy, and warranty coverage (if applicable). | |
| Bulletin Number: 09-014-18-3443a | |
| When encountering a vehicle with paint damage, refer to the "Mazda Pocket Paint Guide" to determine cause, prevention, remedy, and warranty coverage (if applicable). Copies of the Mazda Pocket Paint Guide are available for order on Mazda e- | |
| Bulletin Number: 0901801 | |
| SUBJECT ON SERVICE INFORMATION FOR KEYLESS ENTRY SYSTEM. *SLC | |
| Bulletin Number: 0901904 | |
| LOOSE REAR QUARTER WINDOW GLASS. *MJ | |
| Bulletin Number: 09-019-18-3450 | |
| This service bulletin provides information regarding the proper use of the driver's floor mat to avoid any potential interference with the foot pedals. The following are possible causes of floor mat interference, which can be avoided with p | |
| Bulletin Number: 0902604 | |
| SPEEDOMETER REPLACEMENT PROCEDURE. *TT | |
| Bulletin Number: 0902605 | |
| POWER SLIDING DOOR (PSD) RE-OPENS AFTER STARTING TO CLOSE AND LATCH. *TT | |
| Bulletin Number: 09-027-14-2935 | |
| THIS SERVICE BULLETIN PROVIDES INFORMATION REGARDING THE PROPER USE OF THE DRIVERS FLOOR MAT TO AVOID ANY POTENTIAL INTERFERENCE WITH THE FOOT PEDALS. THE FOLLOWING ARE POSSIBLE CAUSES OF FLOOR MAT INTERFERENCE, WHICH CAN BE AVOIDED WITH P | |
| Bulletin Number: 0902904 | |
| POPPING NOISE FROM FRONT SUSPENSION WHEN DRIVING OVER BUMPS. *TT | |
| Bulletin Number: 0903304 | |
| REAR COMBINATION LAMP REMOVAL CAUTION. *TT | |
| Bulletin Number: 09-034-14-2956 | |
| IN ACCORDANCE WITH FEDERAL REGULATIONS, FOLLOW THE PROCEDURE LISTED BELOW WHEN REPLACING A SPEEDOMETER.NOTE:MAZDA VEHICLES ARE MANUFACTURED WITH TAMPER-PROOF SPEEDOMETERS.WHEN A SPEEDOMETER IS REPLACED, THE NEW SPEEDOMETER WILL READ ZERO | |
| Bulletin Number: 09-034-18-3430 | |
| In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer's responsibility to co | |
| Bulletin Number: 09-034-18-3430a | |
| In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer's responsibility to co | |
| Bulletin Number: 09-035-17-3080 | |
| In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer?s responsibility to co | |
| Bulletin Number: 0903804 | |
| POWER SLIDING DOOR (PSD) DRIVE MODULE REMOVAL / INSTALLATION PROCEDURES. *TT | |
| Bulletin Number: 0904004 | |
| POWER SLIDING DOOR (PSD) SYSTEM SERVICE TIPS DUE TO INOPERATIVE OR IMPROPER POWER SLIDING DOOR (PSD) OPERATION. *TT | |
| Bulletin Number: 1100102 | |
| SUBJECT REGARDING VIL (VEHICLE INFORMATION LABEL) DELETION, MODELS PRODUCED FROM JANUARY 7,2002. *SLC | |
| Bulletin Number: 2204H | |
| THE POSITIVE CRANKCASE VENTILATION (PCV) HOSE MAY FAIL, CAUSING ROUGH IDLING AND/OR THE MALFUNCTION INDICATOR LAMP (MIL) TO ILLUMINATE. EMISSION RECALL 2204H LETTER TO DEALER; ATTACHMENT I DEALER INFORMATION; ATTACHMENT II; ATTACHMENT III | |
| Bulletin Number: MT-012-18 | |
| If a vehicle has body vibration or steering wheel shimmy while driving and the root cause is determined to be tire balance, re-balance the tires using a Hunter GSP9700 or equivalent balance machine. If your dealer does not have a GSP9700 or | |
| Bulletin Number: RF-18-03 | |
| EXHAUST PIPE GASKET OPEN END: There has been some concern with the open end of hoop design being considered a defect in the gasket for P/N AJ17-40-305. The end of this ?hoop? is intentionally modified to press fix the gasket on the exhaust | |
| Bulletin Number: SA-061-17 | |
| In an effort to achieve a higher level of Customer Experience and retain the value of Mazda's vehicles, MNAO Warranty Operations is© 2017 Mazda North American Operations, U.S.A. allowing all Mazda dealers to utilize a third party, SPECMO En | |
| Bulletin Number: SB-09-005-13 | |
| MAZDA: ON SOME VEHICLES, TO AVOID POTENTIAL INTERFERENCE OF FOOT PLACED ON PEDALS, INFORMATION IS PROVIDED REGARDING PROPER USE, AND PLACEMENT, OF DRIVER'S FLOOR MAT. VARIOUS MODELS AND MODEL YEARS. *PE | |
| 2002 MAZDA MX-5 | |
| Bulletin Number: 09-001/16 | |
| SUMMARY TO BE PROVIDED ON A FUTURE DATE. | |
| 2002 MAZDA PROTEGE | |
| Bulletin Number: | |
| INFORMATION ON FUEL INJECTOR(S) REPLACEMENT GUIDELINES. *SLC | |
| Bulletin Number: 00-001-13-2748 | |
| MAZDA HAS DEVELOPED FACTORY RECOMMENDED SCHEDULED MAINTENANCE SERVICES THAT SUPPORT ALL MAJOR VEHICLE SYSTEMS. MAZDA RECOMMENDS DEALERS FOLLOW THE SCHEDULED MAINTENANCE TABLES AS CITED IN THE VEHICLE-SPECIFIC WORKSHOP MANUAL OR OWNERS MANU | |
| Bulletin Number: 00-001-13-2748A | |
| MAZDA HAS DEVELOPED FACTORY RECOMMENDED SCHEDULED MAINTENANCE SERVICES THAT SUPPORT ALL MAJOR VEHICLE SYSTEMS. MAZDA RECOMMENDS DEALERS FOLLOW THE SCHEDULED MAINTENANCE TABLES AS CITED IN THE VEHICLE-SPECIFIC WORKSHOP MANUAL OR OWNERS MANU | |
| Bulletin Number: 00-001-18-3446 | |
| Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle-specific workshop manual or owner's manu | |
| Bulletin Number: 00-001-18-3446a | |
| Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle- specific workshop manual or owner's man | |
| Bulletin Number: 00-001-19-3560 | |
| Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle- specific workshop manual or owner's man | |
| Bulletin Number: 00-002-14-2936 | |
| MAZDA NORTH AMERICAN OPERATIONS RECEIVED MANY REQUESTS FROM OUR DEALERS ASKING US TO APPROVE ADDITIONAL ON-CAR BRAKE LATHES AS AN OPTION FOR MNAO AUTHORIZED EQUIPMENT. DUE TO YOUR FEEDBACK AND AFTER EVALUATING A FEW ON-CAR BRAKE LATHES, WE | |
| Bulletin Number: 00-002-19-3561 | |
| Mazda North American Operations has approved an additional on-car brake lathe as an option for MNAO authorized equipment. The Pro-Cut On-Car Brake Lathe has been added to the MNAO authorized equipment program. NOTE: Accu-turn is still an ap | |
| Bulletin Number: 00-003-18-3480 | |
| Mazda North American Operations has approved an additional on-car brake lathe as an option for MNAOauthorized equipment. The Pro-Cut On-Car Brake Lathe has been added to the MNAO authorizedequipment program.NOTE: Accu-turn is still an appro | |
| Bulletin Number: 00-003-18-3480a | |
| Mazda North American Operations has approved an additional on-car brake lathe as an option for MNAO authorized equipment. The Pro-Cut On-Car Brake Lathe has been added to the MNAO authorized equipment program. NOTE: Accu-turn is still an ap | |
| Bulletin Number: 00-003-19-3583 | |
| In support of the new MRT distribution, Mazda will ship to dealers a new Dual Purpose Diagnostic Leak Detector beginning March, 2019. Training videos will be posted to MGSS shortly and Workshop Manual procedures will be revised gradually. | |
| Bulletin Number: 00-004-12-2741 | |
| MAZDA HAS DEVELOPED FACTORY RECOMMENDED SCHEDULED MAINTENANCE SERVICES THAT SUPPORT ALL MAJOR VEHICLE SYSTEMS. MAZDA RECOMMENDS DEALERS FOLLOW THE SCHEDULED MAINTENANCE TABLES AS CITED IN THE VEHICLE-SPECIFIC WORKSHOP MANUAL OR OWNERS MANU | |
| Bulletin Number: 00-004-16-3237 | |
| RAISING A VEHICLE WITH A JACK CAN BE DANGEROUS IF NOT DONE PROPERLY. THE VEHICLE CAN SLIP OFF THE JACK AND SERI-OUSLY INJURE SOMEONE. IN THIS SERVICE INFORMATION, SOME IMPORTANT WARNINGS AND CAUTIONS HAVE BEEN TAKEN FROM THE OWNERS MANUAL. | |
| Bulletin Number: 00204 | |
| EVAPORATIVE EMMISSIONS AND RECIVER ADAPTERS. *EH | |
| Bulletin Number: 00307 | |
| AVAILABILITY OF NON-REQUIRED TOOLS. *KB | |
| Bulletin Number: 01-001-19-3551 | |
| This service bulletin provides testing and charging procedures in order to promote proper battery maintenance, to deliver new vehicles with fully charged batteries, and to reduce unnecessary battery replacement cost. For new vehicles in sto | |
| Bulletin Number: 01-002-19-3552 | |
| The Mazda GR8-1291 is required for all warranty battery testing. If the Mazda GR8-1291 is not used, incorrect battery testing may result in unnecessary battery replacement. Use the following test procedures in this Service Bulletin to test | |
| Bulletin Number: 01-003-15-3014 | |
| USE THE FOLLOWING REPAIR PROCEDURE TO MINIMIZE THE NEED TO REPLACE THE CATALYST CONVERTER/EXHAUST PIPE WHEN REMOVING OXYGEN SENSORS AND/OR AIR FUEL RATIO SENSORS. | |
| Bulletin Number: 0100403 | |
| ENGINE RATTLE NOISE AT 1000 - 3000 RPM COLD ENGINE. *TT | |
| Bulletin Number: 01-004-19-3558 | |
| On some vehicles, a sulfur smell or 'rotten egg' odor may be noticed coming from the exhaust system. The odor is usually noticed after a cold start, fast idle, extended periods of idling and full throttle acceleration. Sulfur smell is not a | |
| Bulletin Number: 0100602 | |
| SUBJECT REGARDING FUEL PUMP ASSEMBLY AND RELATED COMPONENT REPLACEMENT GUIDELINES. *SLC | |
| Bulletin Number: 01-008-18-3451 | |
| This service bulletin provides testing and charging procedures in order to promote proper battery maintenance, to deliver new vehicles with fully charged batteries, and to reduce unnecessary battery replacement cost. For new vehicles in sto | |
| Bulletin Number: 0100904 | |
| ENGINE HARD TO START. *MR | |
| Bulletin Number: 01-009-18-3452 | |
| The Mazda GR8-1291 is required for all warranty battery testing. If the Mazda GR8-1291 is not used, incorrect battery testing may result in unnecessary battery replacement. Use the following test procedures in this Service Bulletin to test | |
| Bulletin Number: 01-016-18-3522 | |
| On some vehicles, a sulfur smell or 'rotten egg' odor may be noticed coming from the exhaust system. The odor is usually noticed after a cold start, fast idle, extended periods of idling and full throttle acceleration. Sulfur smell is not a | |
| Bulletin Number: 0102504 | |
| BATTERY TEST PROCEDURE REQUIREMENTS. *TT | |
| Bulletin Number: 0102803 | |
| MALFUNCTION INDICATOR LIGHT (MIL) ILLUMINATION WITH DIAGNOSTIC TROUBLE CODE (DTC) P0507 STORED IN MEMORY. VARIOUS MODELS INCLUDING THE MP3, AND MAZDASPEED 2001-2003. *TT | |
| Bulletin Number: 0200102 | |
| SUBJECT REGARDING 15 INCH PLASTIC WHEEL COVER CRACK DURING REMOVAL. *SLC | |
| Bulletin Number: 02-001-13-2752 | |
| SOME CUSTOMERS MAY COMPLAIN OF SIGNS OF OIL ON THE STRUTS OR SHOCK ABSORBERS. IN MOST CASES THE OIL THAT IS PRESENT IS NORMAL, AND A RESULT OF THE OIL THAT REMAINS ON THE SHAFT DURING THE NORMAL SWEEPING PROCESS OF THE SHAFT SEAL. FOLLOW TH | |
| Bulletin Number: 02-001-19-3550 | |
| Some customers may complain of signs of oil on the struts or shock absorbers. In most cases the oil that is present is normal, and a result of the oil that remains on the shaft during the normal sweeping process of the shaft seal. Follow th | |
| Bulletin Number: 0200303 | |
| A CLUNK/KNOCK NOISE CAN BE HEARD FROM THE REAR STABILIZER BAR WHEN DRIVING OVER UNEVEN ROAD SURFACE SUCH AS SPEED BUMPS. 2001 MP3 PROTEGE & 2003-2003.5 MAZDASPEED PROTEGE. *TT | |
| Bulletin Number: 02-006-18-3449 | |
| Some customers may complain of signs of oil on the struts or shock absorbers. In most cases the oil that is present is normal, and a result of the oil that remains on the shaft during the normal sweeping process of the shaft seal. Follow th | |
| Bulletin Number: 0500204 | |
| CRACKING OF THE A/T GEAR INDICATOR LETTERING PLATE. MODELS TO INCLUDE ARE MAZDA PROTEGE5 2001-2003. *TT | |
| Bulletin Number: 06012004 | |
| PROGRAMMABLE MODULE INSTALLATION. ( 2004 MAZDA B SERIES) *JB | |
| Bulletin Number: 07-002-13-2842 | |
| A MUSTY/MILDEW TYPE ODOR MAY COME FROM THE VENTS WHEN THE AIR CONDITIONING (A/C) SYSTEM IS OPERATING. IT IS MOST NOTICEABLE WHEN THE A/C IS FIRST TURNED ON. THIS ODOR IS THE RESULT OF MOLD GROWTH IN THE A/C EVAPORATOR/COOLING UNIT WHICH IS | |
| Bulletin Number: 07-002-18-3432 | |
| A musty/mildew type odor may come from the vents when the air conditioning (A/C) system is operating. It is most noticeable when the A/C is first turned ON. This odor is the result of mold growth in the A/Cevaporator/cooling unit which is c | |
| Bulletin Number: 07-002-19-3616 | |
| A musty/mildew type odor may come from the vents when the air conditioning (A/C) system is operating. It is most noticeable when the A/C is first turned ON. This odor is the result of mold growth in the A/C evaporator/cooling unit which is | |
| Bulletin Number: 0700402 | |
| SUBJECT REGARDING AIR CONDITIONING MUSTY / MILDEW ODOR. *TT | |
| Bulletin Number: 0700503 | |
| A/C SWITCH LIGHT GOES OUT AND / OR FLASHES WITH FAN CONTROL SPEED IN NUMBER 2 POSITION. *PH | |
| Bulletin Number: 0800306 | |
| NON GENUINE ACCESSORIES AFFECT AIR BAG OPERATION. *KB | |
| Bulletin Number: 0900104 | |
| PORT OR DEALER INSTALLED AUTO-DIMMING (ELECTRO-CHROMIC) MIRROR, WITH ELECTRONIC COMPASS, AMBIENT TEMPERATURE. *MR | |
| Bulletin Number: 0900203 | |
| ROOF RACK CROSS BAR REMOVAL AND INSTALLATION INSTRUCTIONS. *TT | |
| Bulletin Number: 09-002-19-3554 | |
| This service bulletin provides information regarding the proper use of the driver's floor mat to avoid anypotential interference with the foot pedals. The following are possible causes of floor mat interference,which can be avoided with pro | |
| Bulletin Number: 0900403 | |
| REAR WINDOW DEFROSTER GRID LINE REPAIR PROCEDURE. *TT | |
| Bulletin Number: 09-005-13-2781 | |
| THIS SERVICE BULLETIN PROVIDES INFORMATION REGARDING THE PROPER USE OF THE DRIVERS FLOOR MAT TO AVOID ANY POTEN-TIAL INTERFERENCE WITH THE FOOT PEDALS. THE FOLLOWING ARE POSSIBLE CAUSES OF FLOOR MAT INTERFERENCE, WHICH CAN BE AVOIDED WITH | |
| Bulletin Number: 09-005-19-3562 | |
| When encountering a vehicle with paint damage, refer to the "Mazda Pocket Paint Guide" to determine cause, prevention, remedy, and warranty coverage (if applicable). Copies of the Mazda Pocket Paint Guide are available for order on Mazda e- | |
| Bulletin Number: 0900701 | |
| SUBJECT REGARDING AUDIO REMOVAL - ELECTRICAL SHORT/DAMAGE TO PRINTED CIRCUIT. *JG | |
| Bulletin Number: 0900702 | |
| SUBJECT REGARDING TRUNK KEY DIFFICULT TO INSERT OR UNABLE TO TURN KEY OR CYLINDER FLAP BROKEN. *SLC | |
| Bulletin Number: 0900901 | |
| SUBJECT REGARDING WIND NOISE FROM WINDSHIELD MOLDING. *JG | |
| Bulletin Number: 09-009-19-3566 | |
| In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer's responsibility to co | |
| Bulletin Number: 0901002 | |
| SUBJECT REGARDING MANUAL DOOR MIRROR-HARD TO ADJUST ANGLE. *SLC | |
| Bulletin Number: 0901404 | |
| UNUSUAL NOISE AND/OR EXCESSIVE EFFORT REQUIRED WHEN OPERATING LIFTGATE. *TT | |
| Bulletin Number: 09-014-18-3443 | |
| When encountering a vehicle with paint damage, refer to the "Mazda Pocket Paint Guide" to determine cause, prevention, remedy, and warranty coverage (if applicable). | |
| Bulletin Number: 09-014-18-3443a | |
| When encountering a vehicle with paint damage, refer to the "Mazda Pocket Paint Guide" to determine cause, prevention, remedy, and warranty coverage (if applicable). Copies of the Mazda Pocket Paint Guide are available for order on Mazda e- | |
| Bulletin Number: 0901801 | |
| SUBJECT ON SERVICE INFORMATION FOR KEYLESS ENTRY SYSTEM. *SLC | |
| Bulletin Number: 09-019-18-3450 | |
| This service bulletin provides information regarding the proper use of the driver's floor mat to avoid any potential interference with the foot pedals. The following are possible causes of floor mat interference, which can be avoided with p | |
| Bulletin Number: 0902604 | |
| SPEEDOMETER REPLACEMENT PROCEDURE. *TT | |
| Bulletin Number: 09-027-14-2935 | |
| THIS SERVICE BULLETIN PROVIDES INFORMATION REGARDING THE PROPER USE OF THE DRIVERS FLOOR MAT TO AVOID ANY POTENTIAL INTERFERENCE WITH THE FOOT PEDALS. THE FOLLOWING ARE POSSIBLE CAUSES OF FLOOR MAT INTERFERENCE, WHICH CAN BE AVOIDED WITH P | |
| Bulletin Number: 09-034-14-2956 | |
| IN ACCORDANCE WITH FEDERAL REGULATIONS, FOLLOW THE PROCEDURE LISTED BELOW WHEN REPLACING A SPEEDOMETER.NOTE:MAZDA VEHICLES ARE MANUFACTURED WITH TAMPER-PROOF SPEEDOMETERS.WHEN A SPEEDOMETER IS REPLACED, THE NEW SPEEDOMETER WILL READ ZERO | |
| Bulletin Number: 09-034-18-3430 | |
| In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer's responsibility to co | |
| Bulletin Number: 09-034-18-3430a | |
| In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer's responsibility to co | |
| Bulletin Number: 09-035-17-3080 | |
| In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer?s responsibility to co | |
| Bulletin Number: 1100102 | |
| SUBJECT REGARDING VIL (VEHICLE INFORMATION LABEL) DELETION, MODELS PRODUCED FROM JANUARY 7,2002. *SLC | |
| Bulletin Number: SB-09-005-13 | |
| MAZDA: ON SOME VEHICLES, TO AVOID POTENTIAL INTERFERENCE OF FOOT PLACED ON PEDALS, INFORMATION IS PROVIDED REGARDING PROPER USE, AND PLACEMENT, OF DRIVER'S FLOOR MAT. VARIOUS MODELS AND MODEL YEARS. *PE | |
| 2002 MAZDA PROTEGE 5 | |
| Bulletin Number: 00-003-19-3583 | |
| In support of the new MRT distribution, Mazda will ship to dealers a new Dual Purpose Diagnostic Leak Detector beginning March, 2019. Training videos will be posted to MGSS shortly and Workshop Manual procedures will be revised gradually. | |
| Bulletin Number: 07-002-13-2842 | |
| A MUSTY/MILDEW TYPE ODOR MAY COME FROM THE VENTS WHEN THE AIR CONDITIONING (A/C) SYSTEM IS OPERATING. IT IS MOST NOTICEABLE WHEN THE A/C IS FIRST TURNED ON. THIS ODOR IS THE RESULT OF MOLD GROWTH IN THE A/C EVAPORATOR/COOLING UNIT WHICH IS | |
| Bulletin Number: 07-002-18-3432 | |
| A musty/mildew type odor may come from the vents when the air conditioning (A/C) system is operating. It is most noticeable when the A/C is first turned ON. This odor is the result of mold growth in the A/Cevaporator/cooling unit which is c | |
| Bulletin Number: 07-002-19-3616 | |
| A musty/mildew type odor may come from the vents when the air conditioning (A/C) system is operating. It is most noticeable when the A/C is first turned ON. This odor is the result of mold growth in the A/C evaporator/cooling unit which is | |
| Bulletin Number: 09-009-19-3566 | |
| In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer's responsibility to co | |
| Bulletin Number: 09-034-14-2956 | |
| IN ACCORDANCE WITH FEDERAL REGULATIONS, FOLLOW THE PROCEDURE LISTED BELOW WHEN REPLACING A SPEEDOMETER.NOTE:MAZDA VEHICLES ARE MANUFACTURED WITH TAMPER-PROOF SPEEDOMETERS.WHEN A SPEEDOMETER IS REPLACED, THE NEW SPEEDOMETER WILL READ ZERO | |
| Bulletin Number: 09-034-18-3430 | |
| In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer's responsibility to co | |
| Bulletin Number: 09-034-18-3430a | |
| In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer's responsibility to co | |
| Bulletin Number: 09-035-17-3080 | |
| In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer?s responsibility to co | |
| 2002 MAZDA TRIBUTE | |
| Bulletin Number: 00-001-13-2748 | |
| MAZDA HAS DEVELOPED FACTORY RECOMMENDED SCHEDULED MAINTENANCE SERVICES THAT SUPPORT ALL MAJOR VEHICLE SYSTEMS. MAZDA RECOMMENDS DEALERS FOLLOW THE SCHEDULED MAINTENANCE TABLES AS CITED IN THE VEHICLE-SPECIFIC WORKSHOP MANUAL OR OWNERS MANU | |
| Bulletin Number: 00-001-13-2748A | |
| MAZDA HAS DEVELOPED FACTORY RECOMMENDED SCHEDULED MAINTENANCE SERVICES THAT SUPPORT ALL MAJOR VEHICLE SYSTEMS. MAZDA RECOMMENDS DEALERS FOLLOW THE SCHEDULED MAINTENANCE TABLES AS CITED IN THE VEHICLE-SPECIFIC WORKSHOP MANUAL OR OWNERS MANU | |
| Bulletin Number: 00-001-18-3446 | |
| Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle-specific workshop manual or owner's manu | |
| Bulletin Number: 00-001-18-3446a | |
| Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle- specific workshop manual or owner's man | |
| Bulletin Number: 00-001-19-3560 | |
| Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle- specific workshop manual or owner's man | |
| Bulletin Number: 00-002-14-2936 | |
| MAZDA NORTH AMERICAN OPERATIONS RECEIVED MANY REQUESTS FROM OUR DEALERS ASKING US TO APPROVE ADDITIONAL ON-CAR BRAKE LATHES AS AN OPTION FOR MNAO AUTHORIZED EQUIPMENT. DUE TO YOUR FEEDBACK AND AFTER EVALUATING A FEW ON-CAR BRAKE LATHES, WE | |
| Bulletin Number: 00-002-19-3561 | |
| Mazda North American Operations has approved an additional on-car brake lathe as an option for MNAO authorized equipment. The Pro-Cut On-Car Brake Lathe has been added to the MNAO authorized equipment program. NOTE: Accu-turn is still an ap | |
| Bulletin Number: 00-003-18-3480 | |
| Mazda North American Operations has approved an additional on-car brake lathe as an option for MNAOauthorized equipment. The Pro-Cut On-Car Brake Lathe has been added to the MNAO authorizedequipment program.NOTE: Accu-turn is still an appro | |
| Bulletin Number: 00-003-18-3480a | |
| Mazda North American Operations has approved an additional on-car brake lathe as an option for MNAO authorized equipment. The Pro-Cut On-Car Brake Lathe has been added to the MNAO authorized equipment program. NOTE: Accu-turn is still an ap | |
| Bulletin Number: 00-003-19-3583 | |
| In support of the new MRT distribution, Mazda will ship to dealers a new Dual Purpose Diagnostic Leak Detector beginning March, 2019. Training videos will be posted to MGSS shortly and Workshop Manual procedures will be revised gradually. | |
| Bulletin Number: 00-004-12-2741 | |
| MAZDA HAS DEVELOPED FACTORY RECOMMENDED SCHEDULED MAINTENANCE SERVICES THAT SUPPORT ALL MAJOR VEHICLE SYSTEMS. MAZDA RECOMMENDS DEALERS FOLLOW THE SCHEDULED MAINTENANCE TABLES AS CITED IN THE VEHICLE-SPECIFIC WORKSHOP MANUAL OR OWNERS MANU | |
| Bulletin Number: 0004180 | |
| B29 AND LATER POWERTRAIN CONTROL MODULE (PCM) CALIBRATION UPDATE INFORMATION. REPAIR INFORMATION REVIEW1. *TT | |
| Bulletin Number: 00204 | |
| EVAPORATIVE EMMISSIONS AND RECIVER ADAPTERS. *EH | |
| Bulletin Number: 00307 | |
| AVAILABILITY OF NON-REQUIRED TOOLS. *KB | |
| Bulletin Number: 01-001-19-3551 | |
| This service bulletin provides testing and charging procedures in order to promote proper battery maintenance, to deliver new vehicles with fully charged batteries, and to reduce unnecessary battery replacement cost. For new vehicles in sto | |
| Bulletin Number: 0100204 | |
| CHECK FUEL CAP WARNING LIGHT OR MALFUNCTION INDICATOR LIGHT (MIL) ILLUMINATION WITH DTC P0455/ P0457. *MR | |
| Bulletin Number: 01-002-19-3552 | |
| The Mazda GR8-1291 is required for all warranty battery testing. If the Mazda GR8-1291 is not used, incorrect battery testing may result in unnecessary battery replacement. Use the following test procedures in this Service Bulletin to test | |
| Bulletin Number: 0100302 | |
| SUBJECT REGARDING RECOMMENDED ENGINE OIL. *SLC | |
| Bulletin Number: 01-003-15-3014 | |
| USE THE FOLLOWING REPAIR PROCEDURE TO MINIMIZE THE NEED TO REPLACE THE CATALYST CONVERTER/EXHAUST PIPE WHEN REMOVING OXYGEN SENSORS AND/OR AIR FUEL RATIO SENSORS. | |
| Bulletin Number: 0100402 | |
| SUBJECT REGARDING DIAGNOSTIC INFORMATION OF OXYGEN SENSOR, CATALYST EFFICIENCY AND FUEL SYSTEM MONITORS. *SLC | |
| Bulletin Number: 01-004-19-3558 | |
| On some vehicles, a sulfur smell or 'rotten egg' odor may be noticed coming from the exhaust system. The odor is usually noticed after a cold start, fast idle, extended periods of idling and full throttle acceleration. Sulfur smell is not a | |
| Bulletin Number: 0100503 | |
| MALFUNCTION INDICATOR LAMP (MIL) ON AND/OR DIAGNOSTIC TROUBLE CODES P0401, P0402, P1400 OR P1401 AND RUNS ROUGH, LACKS POWER, SURGE, POOR FUEL ECONOMY. *TT | |
| Bulletin Number: 01-008-18-3451 | |
| This service bulletin provides testing and charging procedures in order to promote proper battery maintenance, to deliver new vehicles with fully charged batteries, and to reduce unnecessary battery replacement cost. For new vehicles in sto | |
| Bulletin Number: 01-009-18-3452 | |
| The Mazda GR8-1291 is required for all warranty battery testing. If the Mazda GR8-1291 is not used, incorrect battery testing may result in unnecessary battery replacement. Use the following test procedures in this Service Bulletin to test | |
| Bulletin Number: 01012005 | |
| CONDENSATION IN FOG LAMPS, ESPECIALLY IN DAMP OR HUMID WEATHER. *TT | |
| Bulletin Number: 0101203 | |
| TAPPET (TICK) NOISE FROM ENGINE. *TT | |
| Bulletin Number: 0101402 | |
| SUBJECT REGARDING INTERMITTENT ENGINE QUIT OR IDLE DIP, REGARDING 3.0 L DURATEC ENGINES ONLY. *SLC | |
| Bulletin Number: 0101402R | |
| INTERMITTENT ENGINE QUIT CONDITION. *TT | |
| Bulletin Number: 0101402R | |
| SOME VEHICLES EQUIPPED WITH A 3.0L DURATEC ENGINE MAY EXHIBIT AN INTERMITTENT ENGINE QUIT CONDITION. *TT | |
| Bulletin Number: 0101502 | |
| SOME VEHICLES MAY EXHIBIT INOPERATIVE OR INACCURATE SPEEDOMETER, 4X4 LAMP ILLUMINATION, AND / OR DIAGNOSTIC TROUBLE CODES P1635 AND / OR P1639, P0602 PRESENT AFTER POWER TRAIN CONTROL MODULE (PCM) OR INSTRUMENT CLUSTER REPLACEMENT. *TT | |
| Bulletin Number: 0101504 | |
| MALFUNCTION INDICATOR LAMP (MIL) ON AND/OR DIAGNOSTIC TROUBLE CODES P0401, P0402, P1400 OR P1401 AND RUNS ROUGH, LACKS POWER, SURGE, POOR FUEL ECONOMY. *TT THIS BULLETIN REPLACES PREVIOUS BULLETIN DATED 4/26/04. *TT | |
| Bulletin Number: 0101604 | |
| DIAGNOSTIC TIPS FOR TROUBLESHOOTING COIL-ON-PLUG MISFIRE CONCERNS. *TT THIS BULLETIN SUPERSEDES LAST ISSUED 5/3/04. *TT | |
| Bulletin Number: 01-016-18-3522 | |
| On some vehicles, a sulfur smell or 'rotten egg' odor may be noticed coming from the exhaust system. The odor is usually noticed after a cold start, fast idle, extended periods of idling and full throttle acceleration. Sulfur smell is not a | |
| Bulletin Number: 0102206 | |
| FRONT CRANKSHAFT BOLT SERVICE WARNING. *NJ | |
| Bulletin Number: 0102302 | |
| SOME VEHCLES EQUIPPED WITH A 2.0L ENGINE AND A MANUAL TRANSMISSION MAY EXHIBIT A ROLLING IDLE CONDITION IN HIGH AMBIENT TEMPERATURES. *TT | |
| Bulletin Number: 0102504 | |
| BATTERY TEST PROCEDURE REQUIREMENTS. *TT | |
| Bulletin Number: 0102903 | |
| MALFUNCTION INDICATOR LAMP (MIL) ON WITH OR WITHOUT ROUGH RUNNING, LACK OF POWER, SURGE OR POOR FUEL ECONOMY, ALONG WITH DIAGNOSTIC TROUBLE CODES (DTCS) P0401, P0402, P1400 OR P1401. *TT | |
| Bulletin Number: 0103003 | |
| A MALFUNCTION INDICATOR LAMP (MIL) WITH DIAGNOSTIC TROUBLE CODE (DTC) P0442, P0455, P0456, P0457 OR P1442 OR A CHECK FUEL CAP LIGHT ILLUMINATED WITH DTC P0457. VARIOUS MODELS INCLUDING THE 2005 TRIBUE AND 2004 B-SERIES. *TT | |
| Bulletin Number: 0103004 | |
| GENERATOR WIRING ROUTING. *TT | |
| Bulletin Number: 0104706 | |
| NO START, NO CRANK, OR MIL ILLUMINATION WITH ONE OR MORE DTC'S PRESENT. *KB | |
| Bulletin Number: 0200105 | |
| STEERING DRIFT / PULL - IMPROVED DIAGNOSTIC AND REPAIR PROCEDURE. *TT | |
| Bulletin Number: 02-001-13-2752 | |
| SOME CUSTOMERS MAY COMPLAIN OF SIGNS OF OIL ON THE STRUTS OR SHOCK ABSORBERS. IN MOST CASES THE OIL THAT IS PRESENT IS NORMAL, AND A RESULT OF THE OIL THAT REMAINS ON THE SHAFT DURING THE NORMAL SWEEPING PROCESS OF THE SHAFT SEAL. FOLLOW TH | |
| Bulletin Number: 02-001-19-3550 | |
| Some customers may complain of signs of oil on the struts or shock absorbers. In most cases the oil that is present is normal, and a result of the oil that remains on the shaft during the normal sweeping process of the shaft seal. Follow th | |
| Bulletin Number: 0200403 | |
| PREMATURE WEAR AND/OR NOISE FROM THE TIE ROD END ESPECIALLY FROM THE OUTER TIE ROD. *TT | |
| Bulletin Number: 02-004-13-2770 | |
| SOME CUSTOMERS MAY COMPLAIN THAT THE STEERING WHEEL IS OFF CENTER MORE THAN 3┬░ EVEN WHEN DRIVING STRAIGHT ON A FLAT ROAD. | |
| Bulletin Number: 02-004-13-2770A | |
| SOME CUSTOMERS MAY COMPLAIN THAT THE STEERING WHEEL IS OFF CENTER MORE THAN 3┬░ EVEN WHEN DRIVING STRAIGHT ON A FLAT ROAD. | |
| Bulletin Number: 02-004-13-2770B | |
| SOME CUSTOMERS MAY COMPLAIN THAT THE STEERING WHEEL IS OFF CENTER MORE THAN 3┬░ EVEN WHEN DRIVING STRAIGHT ON A FLAT ROAD. | |
| Bulletin Number: 02-004-14 | |
| SUMMARY TO BE PROVIDED ON A FUTURE DATE. | |
| Bulletin Number: 02-004-19-3574 | |
| Some customers may complain that the steering wheel is off center more than 3┬░ even when driving straight on a flat road. | |
| Bulletin Number: 02-006-18-3449 | |
| Some customers may complain of signs of oil on the struts or shock absorbers. In most cases the oil that is present is normal, and a result of the oil that remains on the shaft during the normal sweeping process of the shaft seal. Follow th | |
| Bulletin Number: 02-009-16-3155 | |
| SOME CUSTOMERS MAY COMPLAIN THAT THE STEERING WHEEL IS OFF CENTER MORE THAN 3┬░ EVEN WHEN DRIVING STRAIGHT ON A FLAT ROAD. | |
| Bulletin Number: 02-010-18-3477 | |
| Some customers may complain that the steering wheel is off center more than 3┬░ even when driving straight on a flat road. | |
| Bulletin Number: 02062004 | |
| SELF-TEST PROCEDURE FOR SPEED CONTROL SYSTEM. *MR | |
| Bulletin Number: 0400204 | |
| EXCESSIVE FRONT BRAKE ROTOR WEAR AND/OR BRAKE DUST ACCUMULATION ON THE FRONT WHEELS. *TT | |
| Bulletin Number: 0400402 | |
| FLUID LEAKAGE FROM BRAKE RESERVOIR CAP. *TT | |
| Bulletin Number: 0400502 | |
| INADVERTENT DISABLING OF BRAKE SHIFT INTERLOCK. *TT | |
| Bulletin Number: 0400804 | |
| WHEEL SPEED SENSOR REMOVAL TIP. *TT | |
| Bulletin Number: 0407 | |
| DPFE SENSOR APPLICATION REVISION. PARTS FLASH. *TT DPFE SENSOR WARRANTY EXTENSION PROGRAM - SPECIAL SERVICE PROGRAM (SSP) 59. *TT | |
| Bulletin Number: 0415 | |
| WINDSHIELD GLASS REPLACEMENT. PARTS FLASH. *TT | |
| Bulletin Number: 05-001-16-3128 | |
| ALWAYS BE SURE TO USE THE CORRECT AUTOMATIC TRANSMISSION FLUID WHEN REPLACING ATF. USING THE WRONG ATF MAY CAUSE SHIFT QUALITY COMPLAINTS OR MAY EVEN DAMAGE THE TRANSMISSION.NOTE: ATF M-V (TYPE M5) IS NOT THE SAME FLUID AS MERCON®V OR MERC | |
| Bulletin Number: 05-001-18-3453 | |
| Always be sure to use the correct automatic transmission fluid when replacing ATF. Using the wrong ATF may cause shift quality complaints or may even damage the transmission. NOTE: ATF M-V (TYPE M5) IS NOT THE SAME FLUID AS MERCON®V OR MERC | |
| Bulletin Number: 05-002-13-2777 | |
| ALWAYS BE SURE TO USE THE CORRECT AUTOMATIC TRANSMISSION FLUID WHEN REPLACING ATF. USING THE WRONG ATF MAY CAUSE SHIFT QUALITY COMPLAINTS OR MAY EVEN DAMAGE THE TRANSMISSION.NOTE:ATF M-V (TYPE M5) IS NOT THE SAME FLUID AS MERCON®V OR MERCO | |
| Bulletin Number: 05-002-13-2777A | |
| ALWAYS BE SURE TO USE THE CORRECT AUTOMATIC TRANSMISSION FLUID WHEN REPLACING ATF. USING THE WRONG ATF MAY CAUSE SHIFT QUALITY COMPLAINTS OR MAY EVEN DAMAGE THE TRANSMISSION.NOTE:ATF M-V (TYPE M5) IS NOT THE SAME FLUID AS MERCON®V OR MERCO | |
| Bulletin Number: 0500302 | |
| SUBJECT REGARDING HARSH/DELAYED UPSHIFTS AFTER TSS SENSOR REPLACEMENT. *SLC | |
| Bulletin Number: 0500504 | |
| AUTOMATIC TRANSAXLE (A/T) INDICATOR LAMP ON (DIAGNOSTIC TROUBLE CODE P1783 AND/OR P0733) OR COLD CLIMATE SHIFT / ENGAGEMENT CONCERNS. UPDATE. *TT | |
| Bulletin Number: 0500706 | |
| MERCON ATF IS BEING REPLACED BY MERCON V AS A SERVICE FLUID. *KB | |
| Bulletin Number: 0529 | |
| FRONT OUTER DOOR HANDLE REINFORCEMENT HAS BEEN REDESIGNED. *TS | |
| Bulletin Number: 0530 | |
| ELECTRIC COOLING FAN ASSEMBLY. *TS | |
| Bulletin Number: 0600202 | |
| SOME VEHICLES BUILT BEFORE 12-FEB-2002 MAY EXHIBIT A POWER STEERING LEAK AT THE RETURN HOSE AND/OR COOLER HOSE AT THE INTERMEDIATE TUBE ASSEMBLY DURING EXTREME COLD AMBIENT TEMPERATURES -20 TO -28 DEGREES CELCIUS. *SLC | |
| Bulletin Number: 0600203 | |
| PREMATURE WEAR AND/OR NOISE FROM THE TIE ROD END, ESPECIALLY FROM THE OUTER TIE ROD. *TT | |
| Bulletin Number: 06012004 | |
| FUEL TANK GAUGE. *JB | |
| Bulletin Number: 06012004 | |
| METER SET SERVICE TIP. *JB | |
| Bulletin Number: 06012004 | |
| POP/SNAP NOISE WHILE DRIVING. *JB | |
| Bulletin Number: 06012004 | |
| PROGRAMMABLE MODULE INSTALLATION. ( 2004 MAZDA B SERIES) *JB | |
| Bulletin Number: 0700402 | |
| SUBJECT REGARDING AIR CONDITIONING MUSTY / MILDEW ODOR. *TT | |
| Bulletin Number: 0800104 | |
| PRETENSIONER DIAGNOSTIC TROUBLE CODES (DTCS) B1877 OR B1881. *MR | |
| Bulletin Number: 0800105 | |
| PRETENSIONER DIAGNOSTIC TROUBLE CODES (DTCS) B1877, B1881. ORIGINAL NOT RECEIVED. *TT | |
| Bulletin Number: 0800205 | |
| AIR BAG WARNING LAMP ILLUMINATING INTERMITTENTLY WITH DIAGNOSTIC TROUBLE CODES B1994. *TT | |
| Bulletin Number: 0800306 | |
| NON GENUINE ACCESSORIES AFFECT AIR BAG OPERATION. *KB | |
| Bulletin Number: 0800405 | |
| SAFETY BELT RETRACTS TOO SLOWLY. MAZDA INCLUDING 2006 B-SERIES TRUCKS. *SC | |
| Bulletin Number: 08062004 | |
| DEALER NOTICE - SERVICE BULLETIN RELEASE 8/6/2004. *TT | |
| Bulletin Number: 08112004 | |
| DEALER NOTICE - SERVICE BULLETIN RELEASE 8/11/2004. *TT | |
| Bulletin Number: 0900104 | |
| PORT OR DEALER INSTALLED AUTO-DIMMING (ELECTRO-CHROMIC) MIRROR, WITH ELECTRONIC COMPASS, AMBIENT TEMPERATURE. *MR | |
| Bulletin Number: 09-002-19-3554 | |
| This service bulletin provides information regarding the proper use of the driver's floor mat to avoid anypotential interference with the foot pedals. The following are possible causes of floor mat interference,which can be avoided with pro | |
| Bulletin Number: 0900403 | |
| REAR WINDOW DEFROSTER GRID LINE REPAIR PROCEDURE. *TT | |
| Bulletin Number: 09-005-13-2781 | |
| THIS SERVICE BULLETIN PROVIDES INFORMATION REGARDING THE PROPER USE OF THE DRIVERS FLOOR MAT TO AVOID ANY POTEN-TIAL INTERFERENCE WITH THE FOOT PEDALS. THE FOLLOWING ARE POSSIBLE CAUSES OF FLOOR MAT INTERFERENCE, WHICH CAN BE AVOIDED WITH | |
| Bulletin Number: 09-005-19-3562 | |
| When encountering a vehicle with paint damage, refer to the "Mazda Pocket Paint Guide" to determine cause, prevention, remedy, and warranty coverage (if applicable). Copies of the Mazda Pocket Paint Guide are available for order on Mazda e- | |
| Bulletin Number: 09-009-19-3566 | |
| In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer's responsibility to co | |
| Bulletin Number: 0901202 | |
| PASSIVE ANTI-THEFT (PATS) DIAGNOSTIC SERVICE TIPS. *TT | |
| Bulletin Number: 0901202 | |
| SUBJECT REGARDING PASSIVE ANTI-THEFT (PATS) DIAGNOSTIC SERVICE TIPS. *TT | |
| Bulletin Number: 09-014-18-3443 | |
| When encountering a vehicle with paint damage, refer to the "Mazda Pocket Paint Guide" to determine cause, prevention, remedy, and warranty coverage (if applicable). | |
| Bulletin Number: 09-014-18-3443a | |
| When encountering a vehicle with paint damage, refer to the "Mazda Pocket Paint Guide" to determine cause, prevention, remedy, and warranty coverage (if applicable). Copies of the Mazda Pocket Paint Guide are available for order on Mazda e- | |
| Bulletin Number: 0901602 | |
| DOOR LATCH WILL NOT ALLOW DOOR(S) TO BE OPEN FROM INSIDE OR OUTSIDE THE VEHICLE. *TT | |
| Bulletin Number: 0901703 | |
| ELECTRICAL - WIRING - SOLDERING AND CRIMPING REPAIRS - SERVICE TIP. *TT | |
| Bulletin Number: 09-019-18-3450 | |
| This service bulletin provides information regarding the proper use of the driver's floor mat to avoid any potential interference with the foot pedals. The following are possible causes of floor mat interference, which can be avoided with p | |
| Bulletin Number: 0902004 | |
| EXTERIOR MIRROR GLASS AND MOTOR REPLACEMENT GUIDELINES. *MJ | |
| Bulletin Number: 0902604 | |
| SPEEDOMETER REPLACEMENT PROCEDURE. *TT | |
| Bulletin Number: 09-027-14-2935 | |
| THIS SERVICE BULLETIN PROVIDES INFORMATION REGARDING THE PROPER USE OF THE DRIVERS FLOOR MAT TO AVOID ANY POTENTIAL INTERFERENCE WITH THE FOOT PEDALS. THE FOLLOWING ARE POSSIBLE CAUSES OF FLOOR MAT INTERFERENCE, WHICH CAN BE AVOIDED WITH P | |
| Bulletin Number: 09-029-18-3497 | |
| In the event that all vehicle keys are lost and the vehicle key code is not available on the Vehicle Retail Data Inquiry system, replacement keys may only be acquired by obtaining the key code using the Repair Procedure below. Mazda recomme | |
| Bulletin Number: 09-034-14-2956 | |
| IN ACCORDANCE WITH FEDERAL REGULATIONS, FOLLOW THE PROCEDURE LISTED BELOW WHEN REPLACING A SPEEDOMETER.NOTE:MAZDA VEHICLES ARE MANUFACTURED WITH TAMPER-PROOF SPEEDOMETERS.WHEN A SPEEDOMETER IS REPLACED, THE NEW SPEEDOMETER WILL READ ZERO | |
| Bulletin Number: 09-034-18-3430 | |
| In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer's responsibility to co | |
| Bulletin Number: 09-034-18-3430a | |
| In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer's responsibility to co | |
| Bulletin Number: 09-035-17-3080 | |
| In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer?s responsibility to co | |
| Bulletin Number: 13-07R | |
| SUMMARY TO BE PROVIDED ON A FUTURE DATE. | |
| Bulletin Number: 59 | |
| DELTA PRESSURE FEEDBACK EGR (DPFE) SENSOR WARRANTY EXTENSION PROGRAM. SPECIAL SERVICE PROGRAM (SSP) 59. *TT | |
| Bulletin Number: MT-012-18 | |
| If a vehicle has body vibration or steering wheel shimmy while driving and the root cause is determined to be tire balance, re-balance the tires using a Hunter GSP9700 or equivalent balance machine. If your dealer does not have a GSP9700 or | |
| Bulletin Number: RF0315 | |
| ORDER PROCESS FOR TRIBUTE TRAILER HITCH. *TT | |
| Bulletin Number: RF-13-07 | |
| SUMMARY TO BE PROVIDED ON A FUTURE DATE. | |
| Bulletin Number: SA-061-17 | |
| In an effort to achieve a higher level of Customer Experience and retain the value of Mazda's vehicles, MNAO Warranty Operations is© 2017 Mazda North American Operations, U.S.A. allowing all Mazda dealers to utilize a third party, SPECMO En | |
| Bulletin Number: SB-09-005-13 | |
| MAZDA: ON SOME VEHICLES, TO AVOID POTENTIAL INTERFERENCE OF FOOT PLACED ON PEDALS, INFORMATION IS PROVIDED REGARDING PROPER USE, AND PLACEMENT, OF DRIVER'S FLOOR MAT. VARIOUS MODELS AND MODEL YEARS. *PE | |
Recalls for 2002 Mazda
| 2002 MAZDA B-SERIES TRUCK | |
|---|---|
| NHTSA Campaign ID: | VEHICLE SPEED CONTROL:CRUISE CONTROL |
| Manufacturer: | MAZDA MOTOR CORP |
| Manufacture Dates: | 08/06/2001 - 07/31/2002 |
| Potential Units Affected: | 39600 |
Defect Description:MAZDA IS RECALLING MODEL YEAR 1995 THROUGH 1997 AND MODEL YEAR 2001 THROUGH 2003 TRUCKS EQUIPPED WITH TEXAS INSTRUMENTS SPEED CONTROL DEACTIVATION SWITCH (SCDS) AND/OR ANTI-LOCK BRAKE SYSTEM (ABS) AND MANUFACTURED ON OR BEFORE DECEMBER 5, 2002. A COMPONENT OF THE CRUISE CONTROL DEACTIVATION SWITCH MAY DETERIORATE OVER TIME AND DEVELOP A LEAK. THIS OCCURRENCE COULD CAUSE THE SWITCH TO OVERHEAT, SMOKE OR BURN WHICH COULD RESULT IN AN UNDER HOOD FIRE. Consequence:A VEHICLE FIRE COULD OCCUR WITH OR WITHOUT THE ENGINE RUNNING. Action:MAZDA WILL NOTIFY OWNERS THAT DEALERS WILL INSTALL A UNIVERSAL FUSED JUMPER HARNESS ON THE CRUISE CONTROL DEACTIVATION SWITCH FREE OF CHARGE. THE SAFETY RECALL BEGAN ON DECEMBER 11, 2009. OWNERS MAY CONTACT MAZDA AT 1-800-222-5500 OPTION #6. | |
| 2002 MAZDA B-SERIES TRUCK | |
|---|---|
| NHTSA Campaign ID: | VEHICLE SPEED CONTROL |
| Manufacturer: | MAZDA MOTOR CORP |
| Manufacture Dates: | 04/04/1997 - 12/10/2002 |
| Potential Units Affected: | 76000 |
Defect Description:ON CERTAIN TRUCKS EQUIPPED WITH A SPEED CONTROL SYSTEM, THE SPEED CONTROL DEACTIVATION SWITCH MAY, UNDER CERTAIN CONDITIONS, LEAK INTERNALLY AND THEN OVERHEAT, SMOKE, OR BURN. Consequence:THIS COULD RESULT IN AN UNDERHOOD FIRE. Action:DEALERS WILL INSTALL A FUSED WIRING HARNESS. AN INTERIM NOTICE WAS SENT TO OWNERS ON SEPTEMBER 7, 2007, DIRECTING THEM TO HAVE THE SPEED DEACTIVATION CONTROL SWITCH DISCONNECTED TEMPORARILY. A SECOND NOTIFICATION LETTER TO OWNERS WAS IN FEBRUARY 2008 ADVISING THEM TO RETURN TO DEALERS FOR INSTALLATION OF THE REPAIR PART. OWNERS OF AFFECTED VEHICLES WHO DID NOT RECEIVE A PHASE 2 NOTICE AND HAVE NOT HAD THE RECALL COMPLETED WILL BE NOTIFIED BEGINNING AUGUST 6, 2008. OWNERS MAY CONTACT MAZDA AT 1-800-222-5500. | |
| 2002 MAZDA MAZDA6 | |
|---|---|
| NHTSA Campaign ID: | PARKING BRAKE:INDICATOR LIGHT |
| Manufacturer: | MAZDA NORTH AMERICAN OPERATIONS |
| Manufacture Dates: | 10/02/2002 - 05/27/2003 |
| Potential Units Affected: | 45600 |
Defect Description:CERTAIN PASSENGER VEHICLES FAIL TO COMPLY WITH REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 135, "PASSENGER CAR BRAKE SYSTEMS." DURING PRODUCTION, THE FLOAT IN THE FLUID LEVEL SENSOR IN THE BRAKE RESERVOIR CAN BE FORCED OFF OF THE GUIDE RAIL DURING THE FILLING OF THE MASTER CYLINDER. Consequence:SHOULD THIS OCCUR, IT IS POSSIBLE THAT THE FLOAT WILL NOT RETURN TO THE GUIDE RAIL AND THE BRAKE FLUID LEVEL WARNING INDICATOR MAY NOT FUNCTION. Action:MAZDA HAS NOT YET PROVIDED A REMEDY FOR THIS CAMPAIGN. OWNER NOTIFICATION BEGAN JULY 14, 2003. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT MAZDA AT 1-800-222-5500. | |
| 2002 MAZDA MIATA | |
|---|---|
| NHTSA Campaign ID: | EXTERIOR LIGHTING:FOG LIGHTS |
| Manufacturer: | MAZDA NORTH AMERICAN OPERATIONS |
| Manufacture Dates: | 07/10/2000 - 02/28/2003 |
| Potential Units Affected: | 64000 |
Defect Description:ON CERTAIN MINI VANS AND PASSENGER VEHICLES, THE SOCKET HOLDER IN THE FOG LIGHTS IS INSTALLED IN THE LAMP CASING USING PRESSURE. DURING OPERATION OF THE FOG LIGHT, THE HEAT FROM THE BULB CAN EXPAND THE SOCKET HOLDER. THE EXPANSION CAN FORCE THE SOCKET HOLDER REARWARD. AFTER REPEATEDLY BEING SUBJECT TO THIS EXPANSION, IF THE FOG LIGHT IS ALSO SUBJECTED TO VIBRATION DURING VEHICLE OPERATION, THE SOCKET HOLDER WITH THE BULB HOLDER AND THE WIRING HARNESS MAY SEPARATE FROM THE FOG LIGHT CASING. Consequence:SHOULD THIS OCCUR, THE BULB SOCKET AND THE HARNESS CAN DROP INSIDE THE BUMPER AND POSSIBLY BUT RARELY, THE HEAT GENERATED BY THE BULB CAN CAUSE THE BUMPER TO BURN. Action:DEALERS WILL INSTALL A SPRING TO PREVENT THE SOCKET HOLDER FROM SEPARATING FROM THE LAMP CASE. OWNER NOTIFICATION BEGAN ON JULY 14, 2003. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT MAZDA AT 1-800-222-5500. | |
| 2002 MAZDA MPV | |
|---|---|
| NHTSA Campaign ID: | EXTERIOR LIGHTING:FOG LIGHTS |
| Manufacturer: | MAZDA NORTH AMERICAN OPERATIONS |
| Manufacture Dates: | 11/26/2001 - 02/28/2003 |
| Potential Units Affected: | 64000 |
Defect Description:ON CERTAIN MINI VANS AND PASSENGER VEHICLES, THE SOCKET HOLDER IN THE FOG LIGHTS IS INSTALLED IN THE LAMP CASING USING PRESSURE. DURING OPERATION OF THE FOG LIGHT, THE HEAT FROM THE BULB CAN EXPAND THE SOCKET HOLDER. THE EXPANSION CAN FORCE THE SOCKET HOLDER REARWARD. AFTER REPEATEDLY BEING SUBJECT TO THIS EXPANSION, IF THE FOG LIGHT IS ALSO SUBJECTED TO VIBRATION DURING VEHICLE OPERATION, THE SOCKET HOLDER WITH THE BULB HOLDER AND THE WIRING HARNESS MAY SEPARATE FROM THE FOG LIGHT CASING. Consequence:SHOULD THIS OCCUR, THE BULB SOCKET AND THE HARNESS CAN DROP INSIDE THE BUMPER AND POSSIBLY BUT RARELY, THE HEAT GENERATED BY THE BULB CAN CAUSE THE BUMPER TO BURN. Action:DEALERS WILL INSTALL A SPRING TO PREVENT THE SOCKET HOLDER FROM SEPARATING FROM THE LAMP CASE. OWNER NOTIFICATION BEGAN ON JULY 14, 2003. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT MAZDA AT 1-800-222-5500. | |
| 2002 MAZDA MPV | |
|---|---|
| NHTSA Campaign ID: | VEHICLE SPEED CONTROL:CABLES |
| Manufacturer: | MAZDA NORTH AMERICAN OPERATIONS |
| Manufacture Dates: | 04/01/2001 - 11/15/2001 |
| Potential Units Affected: | 10200 |
Defect Description:ON CERTAIN MINIVANS EQUIPPED WITH CRUISE CONTROL, THE CRUISE CONTROL ACTUATOR CABLE MAY BE BROKEN DUE TO INSUFFICIENT STRENGTH (GROUP 1). ALSO INCLUDED ARE CERTAIN 2000-2001 MINIVANS EQUIPPED WITH CRUISE CONTROL BUILT BETWEEN MARCH 31, 1999 AND MARCH 31, 2001, THAT HAVE HAD THE CRUISE CONTROL REPAIRED AND POSSIBLY HAD A DEFECTIVE CABLE INSTALLED DURING THAT REPAIR (GROUP 2). Consequence:IT IS POSSIBLE THAT THE BROKEN ACTUATOR CABLE MAY BE OUT OF POSITION AND COULD INTERFERE WITH THE OPERATION OF THE ACCELERATOR CABLE, PREVENTING A DECREASE IN ENGINE SPEED WHILE DRIVING, INCREASING THE RISK OF A CRASH. Action:DEALERS WILL REPLACE THE ACTUATOR CABLE. OWNER NOTIFICATION FOR VEHICLES INVOLVED IN GROUP 1 BEGAN ON JULY 7, 2004. OWNER NOTIFICATION FOR VEHICLES INVOLVED IN GROUP 2 BEGAN ON SEPTEMBER 10, 2004. OWNERS SHOULD CONTACT MAZDA AT 1-800-222-5500. | |
| 2002 MAZDA MPV | |
|---|---|
| NHTSA Campaign ID: | EQUIPMENT:OTHER:LABELS |
| Manufacturer: | MAZDA NORTH AMERICAN OPERATIONS |
| Manufacture Dates: | 11/26/2001 - 02/20/2002 |
| Potential Units Affected: | 14000 |
Defect Description:CERTAIN MINI VANS FAIL TO COMPLY TO THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 120, "TIRE SELECTION AND RIMS FOR MOTOR VEHICLES OTHER THAN PASSENGER CARS." AN INCORRECT GROSS AXLE WEIGHT RATING (GAWR) WAS INDICATED ON THE CERTIFICATION LABEL. Consequence:Action:OWNERS WILL BE MAILED ACCURATE CERTIFICATION LABELS AND INSERTS FOR THE OWNER'S MANUAL. OWNER NOTIFICATION BEGAN JUNE 12, 2002. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT MAZDA AT 1-800-222-5500. | |
| 2002 MAZDA MPV | |
|---|---|
| NHTSA Campaign ID: | EXTERIOR LIGHTING:FOG LIGHTS |
| Manufacturer: | MAZDA NORTH AMERICAN OPERATIONS |
| Manufacture Dates: | 11/12/2001 - 01/21/2003 |
| Potential Units Affected: | 5400 |
Defect Description:ON CERTAIN MINI VANS EQUIPPED WITH FRONT FOG LIGHTS,THE FOG LIGHT BULB SOCKET MAY HAVE BEEN INSTALLED IMPROPERLY. Consequence:IF THE VEHICLE CONTINUES TO BE USED WITH THIS CONDITION, THE BULB SOCKET AND THE WIRING HARNESS MAY SEPARATE FROM THE FOG LIGHT HOUSING IF EXPOSED TO SHOCK AND/OR VIBRATION AND DROP INSIDE THE BUMPER. SHOULD THIS OCCUR, THE OPERATION OF THE FOG LIGHT MAY THEN CAUSE THE BUMPER TO BURN. Action:DEALERS WILL INSPECT THE INSTALLATION CONDITION OF THE FOG LIGHT BULB ASSEMBLY, AND REPAIR IT WHEN NECESSARY. OWNER NOTIFICATION BEGAN MARCH 31, 2003. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT MAZDA AT 1-800-222-5500. | |
| 2002 MAZDA TRIBUTE | |
|---|---|
| NHTSA Campaign ID: | STRUCTURE:FRAME AND MEMBERS |
| Manufacturer: | Mazda North American Operations |
| Manufacture Dates: | 05/22/2000 - 12/19/2003 |
| Potential Units Affected: | 109000 |
Defect Description:Mazda North American Operations (Mazda) is recalling certain model year 2001-2004 Tribute vehicles manufactured May 22, 2000, through December 19, 2003, originally sold, or currently registered in, Connecticut, Delaware, Illinois, Indiana, Iowa, Maine, Maryland, Massachusetts, Michigan, Minnesota, Missouri, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont, West Virginia, Wisconsin and the District of Columbia. These vehicles may experience excessive corrosion at the forward attachment of the lower control arm. Consequence:A separation of the lower control arm can result in a significant loss of steering control, increasing the risk of a crash. Action:Mazda will notify owners, and dealers will install a newly designed reinforcement cross-brace, free of charge. The recall began on May 29, 2014. Owners may contact Mazda at 1-800-222-5500. Mazda's number for this recall is 7514D. | |
| 2002 MAZDA TRIBUTE | |
|---|---|
| NHTSA Campaign ID: | VEHICLE SPEED CONTROL:CABLES |
| Manufacturer: | MAZDA NORTH AMERICAN OPERATIONS |
| Manufacture Dates: | 05/30/2001 - 12/19/2003 |
| Potential Units Affected: | 121000 |
Defect Description:ON CERTAIN SPORT UTILITY VEHICLES, THE ACCELERATOR CABLE MAY PREVENT THE THROTTLE FROM RETURNING TO THE IDLE POSITION. Consequence:AN UNEXPECTED INCREASE IN ENGINE IDLE SPEED MAY INCREASE STOPPING DISTANCE AND MAY RESULT IN A VEHICLE CRASH. Action:DEALERS WILL REPLACE THE ACCELERATOR CABLE. THE RECALL BEGAN ON JANUARY 28, 2005. OWNERS SHOULD CONTACT MAZDA AT 1-800-222-5500, OPTION #4. | |
| 2002 MAZDA TRIBUTE | |
|---|---|
| NHTSA Campaign ID: | LATCHES/LOCKS/LINKAGES:HATCHBACK/LIFTGATE:LOCK |
| Manufacturer: | MAZDA NORTH AMERICAN OPERATIONS |
| Manufacture Dates: | - |
| Potential Units Affected: | 49800 |
Defect Description:CERTAIN 2004-2005 SPORT UTILITY VEHICLES AND CERTAIN 2001-2003 SPORT UTILITY VEHICLE HAVING REAR LIFTGATE COMPONENTS SERVICED WITH 2004 EQUIVALENT COMPONENTS FAIL TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 206, 'DOOR LOCKS AND DOOR RETENTION COMPONENTS.' THE REAR LIFTGATE LATCHING SYSTEM DOES NOT MEET THE INERTIA LOAD REQUIREMENT IN ONE DIRECTION. Consequence:IF THE LIFTGATE IS LEFT UNLOCKED, THERE IS THE POTENTIAL THAT IT MAY OPEN DURING A CRASH. Action:DEALERS WILL REPLACE THE REAR LIFTGATE LATCH RELEASE ROD, THE RELEASE ROD ATTACHMENT CLIP AND THE DOOR HANDLE RETURN SPRING. THE RECALL BEGAN ON MARCH 31, 2005. OWNERS SHOULD CONTACT MAZDA AT 1-800-222-5500. | |
| 2002 MAZDA TRIBUTE | |
|---|---|
| NHTSA Campaign ID: | SERVICE BRAKES, HYDRAULIC:ANTILOCK:CONTROL UNIT/MODULE |
| Manufacturer: | MAZDA MOTOR CORP |
| Manufacture Dates: | 04/17/2000 - 12/19/2003 |
| Potential Units Affected: | 95300 |
Defect Description:ON CERTAIN SPORT UTILITY VEHICLES EQUIPPED WITH ANTILOCK BRAKES (ABS), THE ABS MODULE CONNECTOR MAY HAVE MISSING OR DISLODGED WIRE SEALS. THIS CONDITION COULD ALLOW CONTAMINATION TO ENTER THE MODULE CONNECTOR, CREATING A POTENTIAL FOR AN ELECTRICAL SHORT. Consequence:AN ELECTRICAL SHORT MIGHT CAUSE AN ABS MALFUNCTION THAT WOULD ILLUMINATE THE ABS WARNING LIGHT, AND IN SOME CASES, THE MODULE MAY OVERHEAT RESULTING IN BURNING ODOR, SMOKE, AND/OR FIRE. THIS CONDITION COULD OCCUR EITHER WHEN THE VEHICLE IGNITION SWITCH IS IN THE OFF POSITION OR WHILE THE VEHICLE IS BEING OPERATED. Action:DEALERS WILL INSPECT THE WIRE HARNESS CONNECTOR TO THE ABS MODULE FOR MISSING OR DISLODGED WIRE SEALS, AND REPAIR OR REPLACE THE HARNESS CONNECTOR AS APPROPRIATE. THE DEALER WILL ALSO INSPECT THE CONNECTOR ON THE ABS MODULE AND REPLACE IT IF IT IS FOUND TO BE CORRODED OR DAMAGED. THE RECALL BEGAN ON MAY 9, 2007. OWNERS MAY CONTACT MAZDA AT 1-800-222-5500. | |
| 2002 MAZDA TRIBUTE | |
|---|---|
| NHTSA Campaign ID: | SERVICE BRAKES, HYDRAULIC:ANTILOCK:CONTROL UNIT/MODULE |
| Manufacturer: | MAZDA MOTOR CORP |
| Manufacture Dates: | 04/20/2000 - 07/19/2002 |
| Potential Units Affected: | 52390 |
Defect Description:MAZDA IS RECALLING CERTAIN MODEL YEAR 2001-2002 MAZDA TRIBUTE VEHICLES MANUFACTURED FROM APRIL 20, 2000, THROUGH JULY 19, 2002. THE BRAKE MASTER CYLINDER RESERVOIR CAP CAN LEAK BRAKE FLUID. IF BRAKE FLUID LEAKS, IT COULD COME IN CONTACT WITH THE ANTILOCK BRAKE SYSTEM (ABS) MODULE WIRING HARNESS CONNECTOR. Consequence:CORROSION MAY DEVELOP IN THE ELECTRICAL CONNECTOR LEADING MELTING, SMOKING OR POSSIBLE FIRE. Action:MAZDA WILL NOTIFY OWNERS, AND DEALERS WILL REPLACE THE VEHICLE'S BRAKE MASTER CYLINDER RESERVOIR CAP AND MODIFY THE ABS ELECTRICAL SYSTEM, FREE OF CHARGE. UNTIL THE REPAIR HAS BEEN PERFORMED, VEHICLE OWNERS SHOULD PARK THEIR VEHICLES OUTSIDE. THE SAFETY RECALL BEGAN ON JUNE 22, 2012. OWNERS MAY CONTACT MAZDA AT 1-800-222-5500, OPTION 6. | |
| 2002 MAZDA TRIBUTE | |
|---|---|
| NHTSA Campaign ID: | ENGINE AND ENGINE COOLING |
| Manufacturer: | MAZDA NORTH AMERICAN OPERATIONS |
| Manufacture Dates: | - |
| Potential Units Affected: | 217500 |
Defect Description:Mazda is recalling certain model year 2001 through 2006, and 2008, Tribute vehicles equipped with 3.0L V6 engines and speed control. Inadequate clearance between the engine cover and the speed control cable connector could result in a stuck throttle when the accelerator pedal is fully or almost-fully depressed. This risk exists regardless of whether or not speed control (cruise control) is used. Consequence:A stuck throttle may result in very high vehicle speeds and make it difficult to stop or slow the vehicle, which could cause a crash, serious injury or death. Action:Mazda will notify owners, and dealers will repair the vehicles by increasing the engine cover clearance, free of charge. Remedy parts are now available. The safety recall began on September 13, 2012. Owners may contact Mazda Customer Assistance Center at 1-800-222-5500, option #6. | |
| 2002 MAZDA TRIBUTE | |
|---|---|
| NHTSA Campaign ID: | VEHICLE SPEED CONTROL:CABLES |
| Manufacturer: | MAZDA NORTH AMERICAN OPERATIONS |
| Manufacture Dates: | - |
| Potential Units Affected: | 217500 |
Defect Description:Mazda is recalling certain model year 2001 through 2006, and 2008, Tribute vehicles equipped with 3.0L V6 engines and speed control. Inadequate clearance between the engine cover and the speed control cable connector could result in a stuck throttle when the accelerator pedal is fully or almost-fully depressed. This risk exists regardless of whether or not speed control (cruise control) is used. Consequence:A stuck throttle may result in very high vehicle speeds and make it difficult to stop or slow the vehicle, which could cause a crash, serious injury or death. Action:Mazda will notify owners, and dealers will repair the vehicles by increasing the engine cover clearance, free of charge. Remedy parts are now available. The safety recall began on September 13, 2012. Owners may contact Mazda Customer Assistance Center at 1-800-222-5500, option #6. | |
| 2002 MAZDA TRIBUTE | |
|---|---|
| NHTSA Campaign ID: | POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM, PCM) |
| Manufacturer: | MAZDA NORTH AMERICAN OPERATIONS |
| Manufacture Dates: | 04/17/2000 - 09/11/2002 |
| Potential Units Affected: | 106000 |
Defect Description:ON CERTAIN SPORT UTILITY VEHICLES EQUIPPED WITH 3.0L V6 DURATEC ENGINES , DURING DECELERATION, THE ENGINE CAN STALL. Consequence:SHOULD THE ENGINE STALL, A VEHICLE CRASH COULD OCCUR. Action:DEALERS WILL REPROGRAM THE POWER CONTROL MODULE (PCM) WITH THE APPROPRIATE CALIBRATION. THE RECALL BEGAN ON MAY 3, 2004. OWNERS SHOULD CONTACT MAZDA AT 1-800-222-5500. | |
