Mazda Buyers Guide
Click a car name to see the crash test details for that model.
Crash Test Data for 2003 Mazda
| Mazda Vehicle | Front Star Rating | Side Star Rating | Rollover Resistance Rating | ||
|---|---|---|---|---|---|
| Driver | Passenger | Front Seat | Rear Seat | ||
| 2003 B-Series |  | |  | Not Tested |  |
| 2003 B-Series | | | | Not Tested | |
| 2003 Mazda6 | | | | | |
| 2003 Miata MX-5 | | | | Not Tested | |
| 2003 MPV | | | | | |
| 2003 Protege | Not Tested | Not Tested | Not Tested | Not Tested | Not Tested |
| 2003 Protege | | | | | |
| 2003 Tribute | | | | | |
Service Bulletins for 2003 Mazda
| 2003 MAZDA 626 | |
|---|---|
| Bulletin Number: 0100303 | |
| FRONT CRANKSHAFT BOLT SERVICE WARNING. *TT | |
| Bulletin Number: 0900104 | |
| PORT OR DEALER INSTALLED AUTO-DIMMING (ELECTRO-CHROMIC) MIRROR, WITH ELECTRONIC COMPASS, AMBIENT TEMPERATURE. *MR | |
| 2003 MAZDA B-SERIES TRUCK | |
| Bulletin Number: 00-001-13-2748 | |
| MAZDA HAS DEVELOPED FACTORY RECOMMENDED SCHEDULED MAINTENANCE SERVICES THAT SUPPORT ALL MAJOR VEHICLE SYSTEMS. MAZDA RECOMMENDS DEALERS FOLLOW THE SCHEDULED MAINTENANCE TABLES AS CITED IN THE VEHICLE-SPECIFIC WORKSHOP MANUAL OR OWNERS MANU | |
| Bulletin Number: 00-001-13-2748A | |
| MAZDA HAS DEVELOPED FACTORY RECOMMENDED SCHEDULED MAINTENANCE SERVICES THAT SUPPORT ALL MAJOR VEHICLE SYSTEMS. MAZDA RECOMMENDS DEALERS FOLLOW THE SCHEDULED MAINTENANCE TABLES AS CITED IN THE VEHICLE-SPECIFIC WORKSHOP MANUAL OR OWNERS MANU | |
| Bulletin Number: 00-001-18-3446 | |
| Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle-specific workshop manual or owner's manu | |
| Bulletin Number: 00-001-18-3446a | |
| Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle- specific workshop manual or owner's man | |
| Bulletin Number: 00-001-19-3560 | |
| Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle- specific workshop manual or owner's man | |
| Bulletin Number: 00-002-14-2936 | |
| MAZDA NORTH AMERICAN OPERATIONS RECEIVED MANY REQUESTS FROM OUR DEALERS ASKING US TO APPROVE ADDITIONAL ON-CAR BRAKE LATHES AS AN OPTION FOR MNAO AUTHORIZED EQUIPMENT. DUE TO YOUR FEEDBACK AND AFTER EVALUATING A FEW ON-CAR BRAKE LATHES, WE | |
| Bulletin Number: 00-002-19-3561 | |
| Mazda North American Operations has approved an additional on-car brake lathe as an option for MNAO authorized equipment. The Pro-Cut On-Car Brake Lathe has been added to the MNAO authorized equipment program. NOTE: Accu-turn is still an ap | |
| Bulletin Number: 00-003-18-3480 | |
| Mazda North American Operations has approved an additional on-car brake lathe as an option for MNAOauthorized equipment. The Pro-Cut On-Car Brake Lathe has been added to the MNAO authorizedequipment program.NOTE: Accu-turn is still an appro | |
| Bulletin Number: 00-003-18-3480a | |
| Mazda North American Operations has approved an additional on-car brake lathe as an option for MNAO authorized equipment. The Pro-Cut On-Car Brake Lathe has been added to the MNAO authorized equipment program. NOTE: Accu-turn is still an ap | |
| Bulletin Number: 00-003-19-3583 | |
| In support of the new MRT distribution, Mazda will ship to dealers a new Dual Purpose Diagnostic Leak Detector beginning March, 2019. Training videos will be posted to MGSS shortly and Workshop Manual procedures will be revised gradually. | |
| Bulletin Number: 00-004/12 | |
| SUMMARY TO BE PROVIDED ON A FUTURE DATE. | |
| Bulletin Number: 00-004-12-2741 | |
| MAZDA HAS DEVELOPED FACTORY RECOMMENDED SCHEDULED MAINTENANCE SERVICES THAT SUPPORT ALL MAJOR VEHICLE SYSTEMS. MAZDA RECOMMENDS DEALERS FOLLOW THE SCHEDULED MAINTENANCE TABLES AS CITED IN THE VEHICLE-SPECIFIC WORKSHOP MANUAL OR OWNERS MANU | |
| Bulletin Number: 0004080 | |
| EXCESSIVE STEERING VIBRATION AT IDLE. *TT | |
| Bulletin Number: 0004110 | |
| A LOUD ACCESSORY DRIVE BELT SQUEAL AND/OR CHIRP UNDER ALL DRIVING CONDITIONS ON CERTAIN VEHICLES BUILT PRIOR TO 09/18/03. REPAIR INFORMATION REVIEW1. 2004 MODELS ALSO INCLUDED. *TT | |
| Bulletin Number: 0004123 | |
| B28 AND LATER PCM CALIBRATION UPDATE INFORMATION. REPAIR INFORMATION REVIEW1. *TT | |
| Bulletin Number: 0004164 | |
| SPARK KNOCK, DETONATION OR PING CONDITION THROTTLE TIP-IN OR DURING STEADY STATE OPERATION AT OR NEAR WIDE OPEN THROTTLE ON CERTAIN VEHICLES EQUIPPED WITH 3.0L FFV/EFI ENGINES. REPAIR INFORMATION REVIEW1. *TT | |
| Bulletin Number: 00307 | |
| AVAILABILITY OF NON-REQUIRED TOOLS. *KB | |
| Bulletin Number: 01-001-19-3551 | |
| This service bulletin provides testing and charging procedures in order to promote proper battery maintenance, to deliver new vehicles with fully charged batteries, and to reduce unnecessary battery replacement cost. For new vehicles in sto | |
| Bulletin Number: 01-002-19-3552 | |
| The Mazda GR8-1291 is required for all warranty battery testing. If the Mazda GR8-1291 is not used, incorrect battery testing may result in unnecessary battery replacement. Use the following test procedures in this Service Bulletin to test | |
| Bulletin Number: 0100303 | |
| FRONT CRANKSHAFT BOLT SERVICE WARNING. *TT | |
| Bulletin Number: 0100304 | |
| 3.0L LOWER ENGINE OIL LEAKS- DIAGNOSTIC-SERVICE TIP. *JB TT | |
| Bulletin Number: 01-004-19-3558 | |
| On some vehicles, a sulfur smell or 'rotten egg' odor may be noticed coming from the exhaust system. The odor is usually noticed after a cold start, fast idle, extended periods of idling and full throttle acceleration. Sulfur smell is not a | |
| Bulletin Number: 01-008-18-3451 | |
| This service bulletin provides testing and charging procedures in order to promote proper battery maintenance, to deliver new vehicles with fully charged batteries, and to reduce unnecessary battery replacement cost. For new vehicles in sto | |
| Bulletin Number: 01-009-18-3452 | |
| The Mazda GR8-1291 is required for all warranty battery testing. If the Mazda GR8-1291 is not used, incorrect battery testing may result in unnecessary battery replacement. Use the following test procedures in this Service Bulletin to test | |
| Bulletin Number: 0101505 | |
| FRONT CRANKSHAFT BOLT SERVICE WARNING. *MJ INCLUDING 2005 MAZDA B2300 AND 2005 MAZDA6. (UPDATE) *SC | |
| Bulletin Number: 0101505 | |
| FRONT CRANKSHAFT BOLT SERVICE WARNING. *SC | |
| Bulletin Number: 01-016-18-3522 | |
| On some vehicles, a sulfur smell or 'rotten egg' odor may be noticed coming from the exhaust system. The odor is usually noticed after a cold start, fast idle, extended periods of idling and full throttle acceleration. Sulfur smell is not a | |
| Bulletin Number: 0102206 | |
| FRONT CRANKSHAFT BOLT SERVICE WARNING. *NJ | |
| Bulletin Number: 0102504 | |
| BATTERY TEST PROCEDURE REQUIREMENTS. *TT | |
| Bulletin Number: 0102604 | |
| ROUGH IDLE AND/OR 1800-2200 RPM BOOM/VIBRATION. *TT | |
| Bulletin Number: 0103003 | |
| A MALFUNCTION INDICATOR LAMP (MIL) WITH DIAGNOSTIC TROUBLE CODE (DTC) P0442, P0455, P0456, P0457 OR P1442 OR A CHECK FUEL CAP LIGHT ILLUMINATED WITH DTC P0457. VARIOUS MODELS INCLUDING THE 2005 TRIBUE AND 2004 B-SERIES. *TT | |
| Bulletin Number: 0104404 | |
| OIL LEAK FROM OIL FILTER ADAPTER. *TT | |
| Bulletin Number: 02-001-13-2752 | |
| SOME CUSTOMERS MAY COMPLAIN OF SIGNS OF OIL ON THE STRUTS OR SHOCK ABSORBERS. IN MOST CASES THE OIL THAT IS PRESENT IS NORMAL, AND A RESULT OF THE OIL THAT REMAINS ON THE SHAFT DURING THE NORMAL SWEEPING PROCESS OF THE SHAFT SEAL. FOLLOW TH | |
| Bulletin Number: 02-001-19-3550 | |
| Some customers may complain of signs of oil on the struts or shock absorbers. In most cases the oil that is present is normal, and a result of the oil that remains on the shaft during the normal sweeping process of the shaft seal. Follow th | |
| Bulletin Number: 02-006-18-3449 | |
| Some customers may complain of signs of oil on the struts or shock absorbers. In most cases the oil that is present is normal, and a result of the oil that remains on the shaft during the normal sweeping process of the shaft seal. Follow th | |
| Bulletin Number: 0300104 | |
| THUMP / CLUNK FROM DRIVELINE ON LIGHT ACCELERATION OR WHEN STOPPING. *TT | |
| Bulletin Number: 0300303 | |
| 4WD-B-SERIES-THUMPING NOISE/BUMPING SENSATION ACCERLERATING FROM A STOP. *MN *TT | |
| Bulletin Number: 0400504 | |
| GRABBING CONDITION FROM REAR DRUM BRAKES. *TT UPDATED 4/25/08. *NJ | |
| Bulletin Number: 05-001-16-3128 | |
| ALWAYS BE SURE TO USE THE CORRECT AUTOMATIC TRANSMISSION FLUID WHEN REPLACING ATF. USING THE WRONG ATF MAY CAUSE SHIFT QUALITY COMPLAINTS OR MAY EVEN DAMAGE THE TRANSMISSION.NOTE: ATF M-V (TYPE M5) IS NOT THE SAME FLUID AS MERCON®V OR MERC | |
| Bulletin Number: 05-001-18-3453 | |
| Always be sure to use the correct automatic transmission fluid when replacing ATF. Using the wrong ATF may cause shift quality complaints or may even damage the transmission. NOTE: ATF M-V (TYPE M5) IS NOT THE SAME FLUID AS MERCON®V OR MERC | |
| Bulletin Number: 05-002-13-2777 | |
| ALWAYS BE SURE TO USE THE CORRECT AUTOMATIC TRANSMISSION FLUID WHEN REPLACING ATF. USING THE WRONG ATF MAY CAUSE SHIFT QUALITY COMPLAINTS OR MAY EVEN DAMAGE THE TRANSMISSION.NOTE:ATF M-V (TYPE M5) IS NOT THE SAME FLUID AS MERCON®V OR MERCO | |
| Bulletin Number: 05-002-13-2777A | |
| ALWAYS BE SURE TO USE THE CORRECT AUTOMATIC TRANSMISSION FLUID WHEN REPLACING ATF. USING THE WRONG ATF MAY CAUSE SHIFT QUALITY COMPLAINTS OR MAY EVEN DAMAGE THE TRANSMISSION.NOTE:ATF M-V (TYPE M5) IS NOT THE SAME FLUID AS MERCON®V OR MERCO | |
| Bulletin Number: 0500503 | |
| TRANSMISSION FLUID IN-LINE FILTER KIT - REPEAT REPAIRS OF TRANSMISSION - SERVICE TIPS. *TT | |
| Bulletin Number: 0600102 | |
| CLICKING NOISE WHILE TURNING THE STEERING WHEEL. *TT THIS BULLETIN REPLACES PREVIOUS BULLETIN 06-001-02 DATED 6/18/2002. *TT | |
| Bulletin Number: 06012004 | |
| PROGRAMMABLE MODULE INSTALLATION. ( 2004 MAZDA B SERIES) *JB | |
| Bulletin Number: 06012004 | |
| SPARE TIRE/WHEEL SIZE CHANGE. (2004 MAZDA B SERIES) *JB | |
| Bulletin Number: 0800203 | |
| SAFETY BELT PRETENSIONER DIAGNOSTIC TROUBLE CODE B1877 / LFC 46 AND / OR DIAGNOSTIC TROUBLE CODE B1881 / LFC 47. *TT | |
| Bulletin Number: 0800306 | |
| NON GENUINE ACCESSORIES AFFECT AIR BAG OPERATION. *KB | |
| Bulletin Number: 0800405 | |
| SAFETY BELT RETRACTS TOO SLOWLY. MAZDA INCLUDING 2006 B-SERIES TRUCKS. *SC | |
| Bulletin Number: 08022004 | |
| DEALER NOTICE - SERVICE BULLETIN RELEASE. *TT | |
| Bulletin Number: 08042004 | |
| DEALER NOTICE - SERVICE BULLETIN RELEASE - 08/04/2004. *TT | |
| Bulletin Number: 09-002-19-3554 | |
| This service bulletin provides information regarding the proper use of the driver's floor mat to avoid anypotential interference with the foot pedals. The following are possible causes of floor mat interference,which can be avoided with pro | |
| Bulletin Number: 0900504 | |
| BED EXTENDER COMPONENT REPLACEMENT AND REMOVAL/ INSTALLATION INSTRUCTIONS. ALSO INCLUDING THE 2004 MAZDA B-SERIES.*MR | |
| Bulletin Number: 09-005-13-2781 | |
| THIS SERVICE BULLETIN PROVIDES INFORMATION REGARDING THE PROPER USE OF THE DRIVERS FLOOR MAT TO AVOID ANY POTEN-TIAL INTERFERENCE WITH THE FOOT PEDALS. THE FOLLOWING ARE POSSIBLE CAUSES OF FLOOR MAT INTERFERENCE, WHICH CAN BE AVOIDED WITH | |
| Bulletin Number: 09-005-19-3562 | |
| When encountering a vehicle with paint damage, refer to the "Mazda Pocket Paint Guide" to determine cause, prevention, remedy, and warranty coverage (if applicable). Copies of the Mazda Pocket Paint Guide are available for order on Mazda e- | |
| Bulletin Number: 0900805 | |
| BRAKE LAMPS INOPERATIVE-CHECK CENTER HIGH MOUNTED STOP LAMP (CHMSL)-SERVICE TIP. *SC | |
| Bulletin Number: 09-009-19-3566 | |
| In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer's responsibility to co | |
| Bulletin Number: 090104 | |
| UPPER CONTROL ARM CHANGE. *JB | |
| Bulletin Number: 0901202 | |
| PASSIVE ANTI-THEFT (PATS) DIAGNOSTIC SERVICE TIPS. *TT | |
| Bulletin Number: 09-014-18-3443 | |
| When encountering a vehicle with paint damage, refer to the "Mazda Pocket Paint Guide" to determine cause, prevention, remedy, and warranty coverage (if applicable). | |
| Bulletin Number: 09-014-18-3443a | |
| When encountering a vehicle with paint damage, refer to the "Mazda Pocket Paint Guide" to determine cause, prevention, remedy, and warranty coverage (if applicable). Copies of the Mazda Pocket Paint Guide are available for order on Mazda e- | |
| Bulletin Number: 0901703 | |
| ELECTRICAL - WIRING - SOLDERING AND CRIMPING REPAIRS - SERVICE TIP. *TT | |
| Bulletin Number: 09-019-18-3450 | |
| This service bulletin provides information regarding the proper use of the driver's floor mat to avoid any potential interference with the foot pedals. The following are possible causes of floor mat interference, which can be avoided with p | |
| Bulletin Number: 0902004 | |
| EXTERIOR MIRROR GLASS AND MOTOR REPLACEMENT GUIDELINES. *MJ | |
| Bulletin Number: 0902604 | |
| SPEEDOMETER REPLACEMENT PROCEDURE. *TT | |
| Bulletin Number: 09-027-14-2935 | |
| THIS SERVICE BULLETIN PROVIDES INFORMATION REGARDING THE PROPER USE OF THE DRIVERS FLOOR MAT TO AVOID ANY POTENTIAL INTERFERENCE WITH THE FOOT PEDALS. THE FOLLOWING ARE POSSIBLE CAUSES OF FLOOR MAT INTERFERENCE, WHICH CAN BE AVOIDED WITH P | |
| Bulletin Number: 09-034-14-2956 | |
| IN ACCORDANCE WITH FEDERAL REGULATIONS, FOLLOW THE PROCEDURE LISTED BELOW WHEN REPLACING A SPEEDOMETER.NOTE:MAZDA VEHICLES ARE MANUFACTURED WITH TAMPER-PROOF SPEEDOMETERS.WHEN A SPEEDOMETER IS REPLACED, THE NEW SPEEDOMETER WILL READ ZERO | |
| Bulletin Number: 09-034-18-3430 | |
| In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer's responsibility to co | |
| Bulletin Number: 09-034-18-3430a | |
| In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer's responsibility to co | |
| Bulletin Number: 09-035-17-3080 | |
| In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer?s responsibility to co | |
| Bulletin Number: 53 | |
| FIRESTONE WILDERNESS AT TIRE REPLACEMENT SPP 53 PROGRAM END. MAZDA HAS REVISED THE EXPIRATION DATE FOR SPECIAL SERVICE PROGRAM (SSP) 53 TO SEPTEMBER 15, 2004. THIS CHANGE IS TO ENSURE THAT ALL CUSTOMERS HAVE AFFECTED TIRES REPLACED. *T | |
| Bulletin Number: 53 | |
| FIRESTONE WILDERNESS AT TIRE REPLACEMENT SSP 53 PROGRAM END. SSP 53 ENDS SEPTEMBER 13, 2004. THIS COMMUNICATION AND THE ATTACHMENTS PROVIDE UPDATED PROGRAM END INFORMATION. *TT | |
| Bulletin Number: 53 | |
| WILDERNESS AT TIRE REPLACEMENT PROGRAM END WITH ATTACHED UPDATES AND PROGRAM CHANGES. *TT | |
| Bulletin Number: SA-038-18 | |
| Some vehicles may have a check engine light on with a DTC P2004 (Intake Manifold Runner Control Stuck Open) stored in memory. This DTC is set when the IMRC is commanded closed, but the IMRC indicates open. | |
| Bulletin Number: SA-061-17 | |
| In an effort to achieve a higher level of Customer Experience and retain the value of Mazda's vehicles, MNAO Warranty Operations is© 2017 Mazda North American Operations, U.S.A. allowing all Mazda dealers to utilize a third party, SPECMO En | |
| Bulletin Number: SB-09-005-13 | |
| MAZDA: ON SOME VEHICLES, TO AVOID POTENTIAL INTERFERENCE OF FOOT PLACED ON PEDALS, INFORMATION IS PROVIDED REGARDING PROPER USE, AND PLACEMENT, OF DRIVER'S FLOOR MAT. VARIOUS MODELS AND MODEL YEARS. *PE | |
| 2003 MAZDA MAZDA | |
| Bulletin Number: 0102902 | |
| SULFUR SMELL FROM EXHAUST SYSTEM. *TT | |
| 2003 MAZDA MAZDA6 | |
| Bulletin Number: 00-001-13-2748 | |
| MAZDA HAS DEVELOPED FACTORY RECOMMENDED SCHEDULED MAINTENANCE SERVICES THAT SUPPORT ALL MAJOR VEHICLE SYSTEMS. MAZDA RECOMMENDS DEALERS FOLLOW THE SCHEDULED MAINTENANCE TABLES AS CITED IN THE VEHICLE-SPECIFIC WORKSHOP MANUAL OR OWNERS MANU | |
| Bulletin Number: 00-001-13-2748A | |
| MAZDA HAS DEVELOPED FACTORY RECOMMENDED SCHEDULED MAINTENANCE SERVICES THAT SUPPORT ALL MAJOR VEHICLE SYSTEMS. MAZDA RECOMMENDS DEALERS FOLLOW THE SCHEDULED MAINTENANCE TABLES AS CITED IN THE VEHICLE-SPECIFIC WORKSHOP MANUAL OR OWNERS MANU | |
| Bulletin Number: 00-001-18-3446 | |
| Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle-specific workshop manual or owner's manu | |
| Bulletin Number: 00-001-18-3446a | |
| Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle- specific workshop manual or owner's man | |
| Bulletin Number: 00-001-19-3560 | |
| Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle- specific workshop manual or owner's man | |
| Bulletin Number: 00-002-14-2936 | |
| MAZDA NORTH AMERICAN OPERATIONS RECEIVED MANY REQUESTS FROM OUR DEALERS ASKING US TO APPROVE ADDITIONAL ON-CAR BRAKE LATHES AS AN OPTION FOR MNAO AUTHORIZED EQUIPMENT. DUE TO YOUR FEEDBACK AND AFTER EVALUATING A FEW ON-CAR BRAKE LATHES, WE | |
| Bulletin Number: 00-002-19-3561 | |
| Mazda North American Operations has approved an additional on-car brake lathe as an option for MNAO authorized equipment. The Pro-Cut On-Car Brake Lathe has been added to the MNAO authorized equipment program. NOTE: Accu-turn is still an ap | |
| Bulletin Number: 00-003-18-3480 | |
| Mazda North American Operations has approved an additional on-car brake lathe as an option for MNAOauthorized equipment. The Pro-Cut On-Car Brake Lathe has been added to the MNAO authorizedequipment program.NOTE: Accu-turn is still an appro | |
| Bulletin Number: 00-003-18-3480a | |
| Mazda North American Operations has approved an additional on-car brake lathe as an option for MNAO authorized equipment. The Pro-Cut On-Car Brake Lathe has been added to the MNAO authorized equipment program. NOTE: Accu-turn is still an ap | |
| Bulletin Number: 00-003-19-3583 | |
| In support of the new MRT distribution, Mazda will ship to dealers a new Dual Purpose Diagnostic Leak Detector beginning March, 2019. Training videos will be posted to MGSS shortly and Workshop Manual procedures will be revised gradually. | |
| Bulletin Number: 00-004/12 | |
| SUMMARY TO BE PROVIDED ON A FUTURE DATE. | |
| Bulletin Number: 00-004-12-2741 | |
| MAZDA HAS DEVELOPED FACTORY RECOMMENDED SCHEDULED MAINTENANCE SERVICES THAT SUPPORT ALL MAJOR VEHICLE SYSTEMS. MAZDA RECOMMENDS DEALERS FOLLOW THE SCHEDULED MAINTENANCE TABLES AS CITED IN THE VEHICLE-SPECIFIC WORKSHOP MANUAL OR OWNERS MANU | |
| Bulletin Number: 00-004-16-3237 | |
| RAISING A VEHICLE WITH A JACK CAN BE DANGEROUS IF NOT DONE PROPERLY. THE VEHICLE CAN SLIP OFF THE JACK AND SERI-OUSLY INJURE SOMEONE. IN THIS SERVICE INFORMATION, SOME IMPORTANT WARNINGS AND CAUTIONS HAVE BEEN TAKEN FROM THE OWNERS MANUAL. | |
| Bulletin Number: 0004123 | |
| B28 AND LATER PCM CALIBRATION UPDATE INFORMATION. REPAIR INFORMATION REVIEW1. *TT | |
| Bulletin Number: 00204 | |
| EVAPORATIVE EMMISSIONS AND RECIVER ADAPTERS. *EH | |
| Bulletin Number: 00307 | |
| AVAILABILITY OF NON-REQUIRED TOOLS. *KB | |
| Bulletin Number: 01-001-19-3551 | |
| This service bulletin provides testing and charging procedures in order to promote proper battery maintenance, to deliver new vehicles with fully charged batteries, and to reduce unnecessary battery replacement cost. For new vehicles in sto | |
| Bulletin Number: 01-002-18-3417 | |
| Some vehicles may have a MIL illumination with DTC's P0441, P0442, P0455, or P0456 stored in memory. To determine the location of the evaporative system leak, follow the repair procedure below. P0441 - Evaporative emission control system in | |
| Bulletin Number: 01-002-19-3552 | |
| The Mazda GR8-1291 is required for all warranty battery testing. If the Mazda GR8-1291 is not used, incorrect battery testing may result in unnecessary battery replacement. Use the following test procedures in this Service Bulletin to test | |
| Bulletin Number: 0100303 | |
| FRONT CRANKSHAFT BOLT SERVICE WARNING. *TT | |
| Bulletin Number: 01-003-15-3014 | |
| USE THE FOLLOWING REPAIR PROCEDURE TO MINIMIZE THE NEED TO REPLACE THE CATALYST CONVERTER/EXHAUST PIPE WHEN REMOVING OXYGEN SENSORS AND/OR AIR FUEL RATIO SENSORS. | |
| Bulletin Number: 01-004-19-3558 | |
| On some vehicles, a sulfur smell or 'rotten egg' odor may be noticed coming from the exhaust system. The odor is usually noticed after a cold start, fast idle, extended periods of idling and full throttle acceleration. Sulfur smell is not a | |
| Bulletin Number: 0100803 | |
| OIL FILTER CARTRIDGE REMOVAL. *TT ENGINE OIL FILTER CARTRIDGE HOUSING COVER DAMAGE. *TT | |
| Bulletin Number: 01-008-18-3451 | |
| This service bulletin provides testing and charging procedures in order to promote proper battery maintenance, to deliver new vehicles with fully charged batteries, and to reduce unnecessary battery replacement cost. For new vehicles in sto | |
| Bulletin Number: 0100907 | |
| ENGINE NO START DUE TO FROZEN MAIN RELAY/FUEL PUMP RELAY. *KB | |
| Bulletin Number: 01-009-18-3452 | |
| The Mazda GR8-1291 is required for all warranty battery testing. If the Mazda GR8-1291 is not used, incorrect battery testing may result in unnecessary battery replacement. Use the following test procedures in this Service Bulletin to test | |
| Bulletin Number: 010104 | |
| DURING ASSEMBLY A LUBRICANT USED TO EASE THE INSTALLATION OF THE DOOR WEATHER-STRIP CAUSED STAINING OVER THE CLEAR COAT ON THE DOOR SASHES. SPECIAL SERVICE PROGRAM (SSP) 57. *NM | |
| Bulletin Number: 01012004 | |
| INTERFERENCE ENGINE. MAZDA M-TIPS. *TT | |
| Bulletin Number: 01012004 | |
| MODULE CONFIGURATION. MAZDA M-TIPS. *TT | |
| Bulletin Number: 01012006 | |
| CENTER PANEL REMOVAL CAUTION. *TT | |
| Bulletin Number: 0101505 | |
| FRONT CRANKSHAFT BOLT SERVICE WARNING. *MJ INCLUDING 2005 MAZDA B2300 AND 2005 MAZDA6. (UPDATE) *SC | |
| Bulletin Number: 0101505 | |
| FRONT CRANKSHAFT BOLT SERVICE WARNING. *SC | |
| Bulletin Number: 01-015-13 | |
| SUMMARY TO BE PROVIDED ON A FUTURE DATE. | |
| Bulletin Number: 01-015-13-2796 | |
| SOME VEHICLES MAY EXPERIENCE A MIL ILLUMINATION WITH DTC P2135 STORED IN MEMORY OR DTCS P0123 AND/OR P0222 STORED AFTER THE THROTTLE BODY HAS BEEN REPLACED. DTC P2135: THROTTLE POSITION SENSOR NO.1 / NO. 2 VOLTAGE CORRELATION DTC P0123: | |
| Bulletin Number: 01-015-13-2796A | |
| SOME VEHICLES MAY EXPERIENCE A MIL ILLUMINATION WITH DTC P2135 STORED IN MEMORY OR DTCS P0123 AND/OR P0222 AFTER THE THROTTLE BODY HAS BEEN REPLACED.DTC P2135: THROTTLE POSITION SENSOR NO.1 / NO. 2 VOLTAGE CORRELATIONDTC P0123: THROTTLE P | |
| Bulletin Number: 01-016-16-3220 | |
| THERE IS A CONCERN THAT SOME WATER PUMPS ARE BEING REPLACED THAT ARE NOT FAULTY, DUE TO SIGNS OF A VERY SMALL COOLANT LEAK FROM THE BLEED HOLE. THIS SERVICE BULLETIN IS TO INFORM YOU ABOUT THE WATER PUMP SEALING MECHA-NISM AND THE CRITERIA | |
| Bulletin Number: 01-016-18-3522 | |
| On some vehicles, a sulfur smell or 'rotten egg' odor may be noticed coming from the exhaust system. The odor is usually noticed after a cold start, fast idle, extended periods of idling and full throttle acceleration. Sulfur smell is not a | |
| Bulletin Number: 0101805 | |
| UNUSUAL NOISE FROM DRIVE BELT AUTO TENSIONER. *TT | |
| Bulletin Number: 0101903 | |
| MALFUNCTION INDICATOR LAMP ILLUMINATION WITH DIAGNOSTIC TROUBLE CODE P0300 - P0304. *TT | |
| Bulletin Number: 0102003 | |
| ENGINE CRANKS BUT NO START - SETS DIAGNOSTIC TROUBLE CODE (DTC) P0335. *TT | |
| Bulletin Number: 0102004 | |
| HESITATION / ROUGH IDLE AT HIGH ALTITUDE. *MJ | |
| Bulletin Number: 0102206 | |
| FRONT CRANKSHAFT BOLT SERVICE WARNING. *NJ | |
| Bulletin Number: 0102503 | |
| MALFUNCTION INDICATOR LAMP ILLUMINATION WITH DIAGNOSTIC TROUBLE CODE P2227. *TT | |
| Bulletin Number: 0102504 | |
| BATTERY TEST PROCEDURE REQUIREMENTS. *TT | |
| Bulletin Number: 0103104 | |
| MALFUNCTION INDICATOR LAMP ILLUMINATION WITH DIAGNOSTIC TROUBLE CODE P2110 - THROTTLE ACTUATOR CONTROL SYSTEM. *TT | |
| Bulletin Number: 0103204 | |
| SURGING WHILE CRUISING AT 40- 50 MPH. *TT | |
| Bulletin Number: 0103304 | |
| MALFUNCTION INDICATOR LAMP ILLUMINATION WITH DIAGNOSTIC TROUBLE CODES P2404 AND/OR P0456. *TT | |
| Bulletin Number: 0104004 | |
| ROUGH IDLE / ENGINE STALL DURING COLD START AT NORMAL AMBIENT TEMPERATURE. *TT | |
| Bulletin Number: 0104406 | |
| MALFUNCTION INDICATOR LIGHT ON WITH DTC P0106. *KB | |
| Bulletin Number: 02-001-13-2752 | |
| SOME CUSTOMERS MAY COMPLAIN OF SIGNS OF OIL ON THE STRUTS OR SHOCK ABSORBERS. IN MOST CASES THE OIL THAT IS PRESENT IS NORMAL, AND A RESULT OF THE OIL THAT REMAINS ON THE SHAFT DURING THE NORMAL SWEEPING PROCESS OF THE SHAFT SEAL. FOLLOW TH | |
| Bulletin Number: 02-001-19-3550 | |
| Some customers may complain of signs of oil on the struts or shock absorbers. In most cases the oil that is present is normal, and a result of the oil that remains on the shaft during the normal sweeping process of the shaft seal. Follow th | |
| Bulletin Number: 0200304 | |
| POPPING / CLUNKING NOISE FROM THE FRONT SUSPENSION. *TT | |
| Bulletin Number: 02-004-13-2770 | |
| SOME CUSTOMERS MAY COMPLAIN THAT THE STEERING WHEEL IS OFF CENTER MORE THAN 3┬░ EVEN WHEN DRIVING STRAIGHT ON A FLAT ROAD. | |
| Bulletin Number: 02-004-13-2770A | |
| SOME CUSTOMERS MAY COMPLAIN THAT THE STEERING WHEEL IS OFF CENTER MORE THAN 3┬░ EVEN WHEN DRIVING STRAIGHT ON A FLAT ROAD. | |
| Bulletin Number: 02-004-13-2770B | |
| SOME CUSTOMERS MAY COMPLAIN THAT THE STEERING WHEEL IS OFF CENTER MORE THAN 3┬░ EVEN WHEN DRIVING STRAIGHT ON A FLAT ROAD. | |
| Bulletin Number: 02-004-14 | |
| SUMMARY TO BE PROVIDED ON A FUTURE DATE. | |
| Bulletin Number: 02-004-14-2976 | |
| SOME CUSTOMERS MAY COMPLAIN THAT THE STEERING WHEEL IS OFF CENTER MORE THAN 3┬░ EVEN WHEN DRIVING STRAIGHT ON A FLAT ROAD. FOLLOW STEERING WHEEL ALIGNMENT PROCEDURE. | |
| Bulletin Number: 02-004-19-3574 | |
| Some customers may complain that the steering wheel is off center more than 3┬░ even when driving straight on a flat road. | |
| Bulletin Number: 0200606 | |
| STEERING PULL/DRIFT-IMPROVED DIAGNOSTIC AND REPAIR PROCEDURES. *KB | |
| Bulletin Number: 02-006-18-3449 | |
| Some customers may complain of signs of oil on the struts or shock absorbers. In most cases the oil that is present is normal, and a result of the oil that remains on the shaft during the normal sweeping process of the shaft seal. Follow th | |
| Bulletin Number: 02-009-16-3155 | |
| SOME CUSTOMERS MAY COMPLAIN THAT THE STEERING WHEEL IS OFF CENTER MORE THAN 3┬░ EVEN WHEN DRIVING STRAIGHT ON A FLAT ROAD. | |
| Bulletin Number: 02-010-18-3477 | |
| Some customers may complain that the steering wheel is off center more than 3┬░ even when driving straight on a flat road. | |
| Bulletin Number: 032404 | |
| DEALER NOTICE - SERVICE BULLETIN RELEASE (03/24/04). MAZDA *TT | |
| Bulletin Number: 04-002-19-3545 | |
| Some vehicles exhibit brake related concerns such as brake noise, brake judder or brake dragging. If you encounter a customer complaint for any one of these symptoms, refer to the following information to understand why symptoms may occur, | |
| Bulletin Number: 0400404 | |
| BRAKE JUDDER AND/OR BRAKE MOAN NOISE. *TT THIS BULLETIN SUPERSEDES THE PREVIOUS BULLETIN ISSUED ON 07/01/04. *TT | |
| Bulletin Number: 04-004-13-2853 | |
| Some vehicles exhibit brake related concerns such as brake noise, brake judder or brake dragging. If you encounter a customer complaint for any one of these symptoms, refer to the following information to understand why symptoms may occur, | |
| Bulletin Number: 04-004-14-2926 | |
| SOME VEHICLES EXHIBIT BRAKE RELATED CONCERNS SUCH AS BRAKE NOISE, BRAKE JUDDER OR BRAKE DRAGGING. IF YOU ENCOUNTER A CUSTOMER COMPLAINT FOR ANY ONE OF THESE SYMPTOMS, REFER TO THE FOLLOWING INFORMATION TO UNDERSTAND WHY SYMPTOMS MAY OCCUR, | |
| Bulletin Number: 04-004-16-3160 | |
| SOME VEHICLES EXHIBIT BRAKE RELATED CONCERNS SUCH AS BRAKE NOISE, BRAKE JUDDER OR BRAKE DRAGGING. IF YOU ENCOUNTER A CUSTOMER COMPLAINT FOR ANY ONE OF THESE SYMPTOMS, REFER TO THE FOLLOWING INFORMATION TO UNDERSTAND WHY SYMPTOMS MAY OCCUR, | |
| Bulletin Number: 04-004-18-3468 | |
| Some vehicles exhibit brake related concerns such as brake noise, brake judder or brake dragging. If you encounter a customer complaint for any one of these symptoms, refer to the following information to understand why symptoms may occur, | |
| Bulletin Number: 0419 | |
| REPLACING THE SPOILER FOAM PROTECTORS ON CERTAIN 5-DOOR MODELS WHEN THERE IS SIGNIFICANT DAMAGE TO THE DECK LID. *TT | |
| Bulletin Number: 0420 | |
| REPLACING THE SPOILER FOAM PROTECTORS ON MAZDA6 SPORTS SEDAN WHEN THERE IS SIGNIFICANT DAMAGE TO THE DECK LID. PARTS FLASH. *TT | |
| Bulletin Number: 0421 | |
| REPLACING SPOILER FOAM PROTECTORS WHEN THERE IS SIGNIFICANT DAMAGE TO THE DECK LID. PARTS FLASH. MAZDA6 SPORT WAGON. *TT | |
| Bulletin Number: 05-001-16-3128 | |
| ALWAYS BE SURE TO USE THE CORRECT AUTOMATIC TRANSMISSION FLUID WHEN REPLACING ATF. USING THE WRONG ATF MAY CAUSE SHIFT QUALITY COMPLAINTS OR MAY EVEN DAMAGE THE TRANSMISSION.NOTE: ATF M-V (TYPE M5) IS NOT THE SAME FLUID AS MERCON®V OR MERC | |
| Bulletin Number: 05-001-18-3453 | |
| Always be sure to use the correct automatic transmission fluid when replacing ATF. Using the wrong ATF may cause shift quality complaints or may even damage the transmission. NOTE: ATF M-V (TYPE M5) IS NOT THE SAME FLUID AS MERCON®V OR MERC | |
| Bulletin Number: 05-002-13-2777 | |
| ALWAYS BE SURE TO USE THE CORRECT AUTOMATIC TRANSMISSION FLUID WHEN REPLACING ATF. USING THE WRONG ATF MAY CAUSE SHIFT QUALITY COMPLAINTS OR MAY EVEN DAMAGE THE TRANSMISSION.NOTE:ATF M-V (TYPE M5) IS NOT THE SAME FLUID AS MERCON®V OR MERCO | |
| Bulletin Number: 05-002-13-2777A | |
| ALWAYS BE SURE TO USE THE CORRECT AUTOMATIC TRANSMISSION FLUID WHEN REPLACING ATF. USING THE WRONG ATF MAY CAUSE SHIFT QUALITY COMPLAINTS OR MAY EVEN DAMAGE THE TRANSMISSION.NOTE:ATF M-V (TYPE M5) IS NOT THE SAME FLUID AS MERCON®V OR MERCO | |
| Bulletin Number: 0500505 | |
| 1-2 SHIFT LOCK. *SC | |
| Bulletin Number: 0500906 | |
| 1-2 SHIFT SHOCK (TRANS RELEARN PROCEDURE DELETED). VEHICLES WITH AUTOMATIC TRANSMISSIONS. *KB | |
| Bulletin Number: 06012004 | |
| EXHAUST SYSTEM CHIRP/SQUEAK NOISE. *JB | |
| Bulletin Number: 06012004 | |
| PROGRAMMABLE MODULE INSTALLATION. ( 2004 MAZDA B SERIES) *JB | |
| Bulletin Number: 0700105 | |
| FOGGING ON LOWER EXTERIOR OF WINDSHIELD. *TT | |
| Bulletin Number: 07-002-13-2842 | |
| A MUSTY/MILDEW TYPE ODOR MAY COME FROM THE VENTS WHEN THE AIR CONDITIONING (A/C) SYSTEM IS OPERATING. IT IS MOST NOTICEABLE WHEN THE A/C IS FIRST TURNED ON. THIS ODOR IS THE RESULT OF MOLD GROWTH IN THE A/C EVAPORATOR/COOLING UNIT WHICH IS | |
| Bulletin Number: 07-002-18-3432 | |
| A musty/mildew type odor may come from the vents when the air conditioning (A/C) system is operating. It is most noticeable when the A/C is first turned ON. This odor is the result of mold growth in the A/Cevaporator/cooling unit which is c | |
| Bulletin Number: 07-002-19-3616 | |
| A musty/mildew type odor may come from the vents when the air conditioning (A/C) system is operating. It is most noticeable when the A/C is first turned ON. This odor is the result of mold growth in the A/C evaporator/cooling unit which is | |
| Bulletin Number: 0800306 | |
| NON GENUINE ACCESSORIES AFFECT AIR BAG OPERATION. *KB | |
| Bulletin Number: 08-003-17-3345 | |
| Mazda Motor Corporation is going to evaluate the following inflators to ensure the safety of the inflator with a desiccant. In order to do this, MNAO is collecting inflators for evaluation in certain zones. For 2003-2008 Mazda6 (including M | |
| Bulletin Number: 08132004 | |
| DEALER NOTICE - SERVICE BULLETIN RELEASE - 08/13/2004. *TT | |
| Bulletin Number: 0900104 | |
| PORT OR DEALER INSTALLED AUTO-DIMMING (ELECTRO-CHROMIC) MIRROR, WITH ELECTRONIC COMPASS, AMBIENT TEMPERATURE. *MR | |
| Bulletin Number: 09-001-19-3553 | |
| When replacing the SiriusXM satellite radio unit (or a MAZDA CONNECT tuner and amp unit (TAU)) with replacement tuner for any reason, a call must be made to inform SiriusXM of the existing Radio ID and the new/replacement SAT Radio ID as so | |
| Bulletin Number: 0900205 | |
| FRONT TURN SIGNALS INOPERATIVE. *TT ORIGINAL. *TT | |
| Bulletin Number: 09-002-19-3554 | |
| This service bulletin provides information regarding the proper use of the driver's floor mat to avoid anypotential interference with the foot pedals. The following are possible causes of floor mat interference,which can be avoided with pro | |
| Bulletin Number: 0900304 | |
| ELECTROCHROMIC MIRROR W/ COMPASS & HOMELINK INSTALLATION CAUTION. *MR | |
| Bulletin Number: 09-003-16-3130 | |
| SOME CUSTOMERS MAY COMPLAIN OF CONDENSATION/FOG INSIDE THE FRONT (HEADLAMP/HEADLIGHT) OR REAR (TAILLAMP/TAIL-LIGHT) COMBINATION LIGHTS. THE RECENT NEW MODELS HAVE BEEN FITTED WITH A CLEAR LENS WHICH CAN CAUSE THE SYMP-TOM TO BE MORE NOTICEA | |
| Bulletin Number: 09-003-19-3555 | |
| Some customers may complain of condensation/fog inside the front (headlamp/headlight) or rear (taillamp/taillight) combination lights. The recent new models have been fitted with a clear lens which can cause the symptom to be more noticeabl | |
| Bulletin Number: 0900403 | |
| REAR WINDOW DEFROSTER GRID LINE REPAIR PROCEDURE. *TT | |
| Bulletin Number: 09-005-13-2781 | |
| THIS SERVICE BULLETIN PROVIDES INFORMATION REGARDING THE PROPER USE OF THE DRIVERS FLOOR MAT TO AVOID ANY POTEN-TIAL INTERFERENCE WITH THE FOOT PEDALS. THE FOLLOWING ARE POSSIBLE CAUSES OF FLOOR MAT INTERFERENCE, WHICH CAN BE AVOIDED WITH | |
| Bulletin Number: 09-005-19-3562 | |
| When encountering a vehicle with paint damage, refer to the "Mazda Pocket Paint Guide" to determine cause, prevention, remedy, and warranty coverage (if applicable). Copies of the Mazda Pocket Paint Guide are available for order on Mazda e- | |
| Bulletin Number: 0900705 | |
| IMPROPER SEAT WARMER OPERATION. *TT | |
| Bulletin Number: 09-007/08 | |
| HEADLIGHT LENS CONDENSATION OR WATER ENTRY - (NOT APPLICABLE TO MAZDASPEED6). *NJ | |
| Bulletin Number: 09-007-14-2878 | |
| SOME CUSTOMERS MAY COMPLAIN OF CONDENSATION/FOG INSIDE THE FRONT OR REAR COMBINATION LIGHTS. THE RECENT NEW MODELS HAVE BEEN FITTED WITH A CLEAR LENS WHICH CAN CAUSE THE SYMPTOM TO BE MORE NOTICEABLE, HOWEVER, IT DOES NOT AFFECT THE PERFORM | |
| Bulletin Number: 09-008-17-3324 | |
| Take caution when cleaning plastic headlight lenses. Damage can occur when using some cleaners that contain strong acid, alkaline cleanser or organic solvent. Damage caused by using these cleaners is not covered by Mazda's New Vehicle Limit | |
| Bulletin Number: 0900904 | |
| MODULAR AUDIO SYSTEM - CENTER PANEL MODULE REMOVAL CAUTION. *TT | |
| Bulletin Number: 09-009-19-3566 | |
| In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer's responsibility to co | |
| Bulletin Number: 090104 | |
| PCM REPLACEMENT. *JB | |
| Bulletin Number: 09-011-18-3448 | |
| Some customers may complain of condensation/fog inside the front (headlamp/headlight) or rear (taillamp/taillight) combination lights. The recent new models have been fitted with a clear lens which can cause the symptom to be more noticeabl | |
| Bulletin Number: 09-012-14-2891 | |
| WHEN REPLACING THE SIRIUSXM SATELLITE RADIO UNIT (OR A MAZDA CONNECT TUNER AND AMP UNIT (TAU)) WITH REPLACEMENT TUNER FOR ANY REASON, A CALL MUST BE MADE TO INFORM SIRIUSXM OF THE EXISTING RADIO ID AND THE NEW/ REPLACEMENT SAT RADIO ID AS S | |
| Bulletin Number: 09-014-18-3443 | |
| When encountering a vehicle with paint damage, refer to the "Mazda Pocket Paint Guide" to determine cause, prevention, remedy, and warranty coverage (if applicable). | |
| Bulletin Number: 09-014-18-3443a | |
| When encountering a vehicle with paint damage, refer to the "Mazda Pocket Paint Guide" to determine cause, prevention, remedy, and warranty coverage (if applicable). Copies of the Mazda Pocket Paint Guide are available for order on Mazda e- | |
| Bulletin Number: 09-018-13-2803 | |
| SOME CUSTOMERS MAY COMPLAIN THAT THE AMBIENT TEMPERATURE DISPLAY IS NOT ACCURATE, OR IT TAKES TOO LONG FOR THE DISPLAY TO SHOW ACTUAL TEMPERATURE. WHEN YOU ENCOUNTER A CUSTOMER WITH THIS CONCERN, FIRST VERIFY THE CONDITION WHEN THE CUSTOMER | |
| Bulletin Number: 09018173351 | |
| Some customers may complain that the ambient temperature display is not accurate, or it takes too long for the display to show actual temperature. When you encounter a customer with this concern, first verify the condition when the customer | |
| Bulletin Number: 09-019-18-3450 | |
| This service bulletin provides information regarding the proper use of the driver's floor mat to avoid any potential interference with the foot pedals. The following are possible causes of floor mat interference, which can be avoided with p | |
| Bulletin Number: 0902103 | |
| DOORS HARD TO CLOSE IN EXTREMELY COLD WEATHER. *TT | |
| Bulletin Number: 09-023-14-2924 | |
| SOME CUSTOMERS MAY COMPLAIN THAT THE AMBIENT TEMPERATURE DISPLAY IS NOT ACCURATE, OR IT TAKES TOO LONG FOR THE DISPLAY TO SHOW ACTUAL TEMPERATURE.WHEN YOU ENCOUNTER A CUSTOMER WITH THIS CONCERN, FIRST VERIFY THE CONDITION WHEN THE CUSTOMER | |
| Bulletin Number: 09-023-18-3475 | |
| When replacing the SiriusXM satellite radio unit (or a MAZDA CONNECT tuner and amp unit (TAU)) with replacement tuner for any reason, a call must be made to inform SiriusXM of the existing Radio ID and the new/replacement SAT Radio ID as so | |
| Bulletin Number: 0902604 | |
| SPEEDOMETER REPLACEMENT PROCEDURE. *TT | |
| Bulletin Number: 09-027-14-2935 | |
| THIS SERVICE BULLETIN PROVIDES INFORMATION REGARDING THE PROPER USE OF THE DRIVERS FLOOR MAT TO AVOID ANY POTENTIAL INTERFERENCE WITH THE FOOT PEDALS. THE FOLLOWING ARE POSSIBLE CAUSES OF FLOOR MAT INTERFERENCE, WHICH CAN BE AVOIDED WITH P | |
| Bulletin Number: 09-034-14-2956 | |
| IN ACCORDANCE WITH FEDERAL REGULATIONS, FOLLOW THE PROCEDURE LISTED BELOW WHEN REPLACING A SPEEDOMETER.NOTE:MAZDA VEHICLES ARE MANUFACTURED WITH TAMPER-PROOF SPEEDOMETERS.WHEN A SPEEDOMETER IS REPLACED, THE NEW SPEEDOMETER WILL READ ZERO | |
| Bulletin Number: 09-034-18-3430 | |
| In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer's responsibility to co | |
| Bulletin Number: 09-034-18-3430a | |
| In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer's responsibility to co | |
| Bulletin Number: 09-035-17-3080 | |
| In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer?s responsibility to co | |
| Bulletin Number: 09-039-13-2852 | |
| SOME VEHICLES MAY EXHIBIT A CHATTERING NOISE AND THE DRIVER-SIDE SEAT LIFT CANNOT BE ADJUSTED BECAUSE THE LOCK PLATE GUIDE COMES OFF THE GUIDE CAM WHEN OPERATING THE LIFT. IF THE LIFT LEVER IS THEN OPERATED WITH THE LOCK PLATE GUIDE OFF, TH | |
| Bulletin Number: 09-046-12-2744 | |
| SOME CUSTOMERS MAY COMPLAIN OF CONDENSATION/FOG INSIDE THE FRONT OR REAR COMBINATION LIGHTS. THE RECENT NEW MODELS HAVE BEEN FITTED WITH A CLEAR LENS WHICH CAN CAUSE THE SYMPTOM TO BE MORE NOTICEABLE, HOWEVER, IT DOES NOT AFFECT THE PERFORM | |
| Bulletin Number: 092103 | |
| DOORS HARD TO CLOSE IN EXTREMELY COLD WEATHER. *TT | |
| Bulletin Number: 10 | |
| MAZDA SERVICE PROGRAM #10 - THE MALFUNCTION INDICATOR LIGHT (MIL) MAY ILLUMINATE DURING AN OBD CHECK AT AN INSPECTION/MAINTENANCE (I/M) STATION CAUSING THE VEHICLE TO FAIL THE INSPECTION/MAINTENANCE STATION (I/M) TEST EVEN THOUGH THE VEHICL | |
| Bulletin Number: 11012005 | |
| INFORMATION DISPLAY FUNCTIONS. *TT | |
| Bulletin Number: 1303F | |
| THE CHECK ENGINE LIGHT MAY ILLUMINATE UNDER CERTAIN CONDITIONS AND A DIAGNOSTIC TROUBLE CODE P2404 MAY BE STORED DUE TO IMPROPER PROGRAMMING OF THE POWERTRAIN CONTROL MODULE. AN EMISSION RECALL CAMPAIGN (# 1303F) TO REPROGRAM THE POWERTRAI | |
| Bulletin Number: 17-04 | |
| A newly established short cord (P/N GAY2-67-SH0) has been released if a connector is broken when performing Recall 9416E. | |
| Bulletin Number: 60 | |
| SPECIAL SERVICE PROGRAM 60 TO REPLACE THE FAN CONTROL MODULE. COMMUNICATIONS TO MAZDA OWNERS AND DEALERSHIPS; ATTACHMENT II; PRE-NOFICIATION OF RECALL AND ELECTRONIC FIELD COMMUNICATIONS. *TT | |
| Bulletin Number: MT-003-18 | |
| The Workshop Manual has two-different airbag procedures, one for Standard Deployment and one for Two-Step Deployment. Standard Deployment is for Mexico spec vehicles and Two-Step Deployment is for US and Canadian spec vehicles. | |
| Bulletin Number: MT-012-18 | |
| If a vehicle has body vibration or steering wheel shimmy while driving and the root cause is determined to be tire balance, re-balance the tires using a Hunter GSP9700 or equivalent balance machine. If your dealer does not have a GSP9700 or | |
| Bulletin Number: RF-04-14R4 | |
| SUMMARY TO BE PROVIDED ON A FUTURE DATE. | |
| Bulletin Number: SA-029-19 | |
| Due to a database error discovered with IDS 114.00-114.02 release (which affects Recall 3719F), it will be necessary to uninstall IDS 114 and install IDS 113.00 and 113.06 update. The Recall can be performed after removing IDS 114 and insta | |
| Bulletin Number: SA-029-19a | |
| The database error discovered with IDS 114.00-114.02 release has been fixed with IDS 114.04 release and is now available for download. | |
| Bulletin Number: SA-061-17 | |
| In an effort to achieve a higher level of Customer Experience and retain the value of Mazda's vehicles, MNAO Warranty Operations is© 2017 Mazda North American Operations, U.S.A. allowing all Mazda dealers to utilize a third party, SPECMO En | |
| Bulletin Number: SA-068-17 | |
| STOPPER PLATES FOR AIR BAG MODULE CONNECTORS HAVE BEEN ESTABLISHED AS NEW SERVICE PARTS. When removing the connector (1) to the air bag module (2), make sure to first lift the stopper plate (3) carefully using a flathead screwdriver (but do | |
| Bulletin Number: SA234 | |
| IDS UPDATE 101.00 AND 101.02 IS NOW AVAILABLE ON MS3 UNDER THE "IDS/INFOTAINMENT" TAB. | |
| Bulletin Number: SA327 | |
| TAKATA RECALLS GENERAL INFORMATION PURPOSE: THIS PAGE WAS CREATED TO ASSIST WITH HANDLING TAKATA AIR BAG RECALLS. PROCESSES: PLEASE USE THESE PROCESS FLOWCHARTS TO PROPERLY HANDLE VEHICLES SUBJECT TO THE TAKATA AIR BAG RECALL. RECALL 82 | |
| Bulletin Number: SB-01-007-09 | |
| MAZDA: VEHICLES MAY EXHIBIT A CONCERN OF UNSTABLE IDLING OR, IN SOME RARE CASES, STALLING, JUST AFTER THE VEHICLE STOPS WITH NO DTCS DETECTED. PROBLEM IS DUE TO THE ACCUMULATION OF CARBON DEPOSITS INSIDE THE THROTTLE BODY CAUSING AIR FLOW | |
| Bulletin Number: SB-01-015-13 | |
| MAZDA: AFTER THROTTLE BODY HAD BEEN REPLACED, ON CERTAIN VEHICLES, THE MIL WILL ILLUMINATE DUE TO AN ELECTRICAL NOISE, WITHIN THE ENGINE HARNESS THAT IS ABNORMAL. MODEL 2003-2004 MAZDA6. *PE | |
| Bulletin Number: SB-01-023-10 | |
| MAZDA: DETERMINING EVAPORATIVE SYSTEM LEAK LOCATION FOR DTCS P0441, P0442, P0455, P0455. SOME VEHICLES MAY HAVE A MIL ILLUMINATION WITH DTCS STORED IN MEMORY. *PE UPDATED 4/18/11. *PE | |
| Bulletin Number: SB-01-028-10 | |
| MAZDA: VARIABLE VALVE TIMING (VVT) NOISE WHEN STARTING ENGINE. WHEN ENGINE IS FIRST STARTED, SOME VEHICLES MAY EXHIBIT A LOUD TICKING NOISE FROM THE VARIABLE VALVE TIMING (VVT) (A). THIS IS CAUSED BY THE LOCK PIN OF THE VARIABLE VALVE TIM | |
| Bulletin Number: SB-09-005-13 | |
| MAZDA: ON SOME VEHICLES, TO AVOID POTENTIAL INTERFERENCE OF FOOT PLACED ON PEDALS, INFORMATION IS PROVIDED REGARDING PROPER USE, AND PLACEMENT, OF DRIVER'S FLOOR MAT. VARIOUS MODELS AND MODEL YEARS. *PE | |
| Bulletin Number: SB-09-057-10 | |
| MAZDA: THERE IS CONDENSATION AND FOG IN THE FRONT AND REAR COMBINATION LIGHTS. *RM | |
| Bulletin Number: SR-7714-F | |
| MAZDA: SEE DOCUMENT SEARCH BUTTON FOR OWNER LETTER. AN INCREASED COMBUSTION, DURING AIR BAG DEPLOYMENT, IS DUE TO INFLATOR PROPELLANT MATERIAL, THAT WAS IMPROPERLY PROCESSED AND AIR BAG MODULE CAN RUPTURE AND INJURE OCCUPANT(S). MODEL 20 | |
| 2003 MAZDA MIATA | |
| Bulletin Number: 00-001-13-2748 | |
| MAZDA HAS DEVELOPED FACTORY RECOMMENDED SCHEDULED MAINTENANCE SERVICES THAT SUPPORT ALL MAJOR VEHICLE SYSTEMS. MAZDA RECOMMENDS DEALERS FOLLOW THE SCHEDULED MAINTENANCE TABLES AS CITED IN THE VEHICLE-SPECIFIC WORKSHOP MANUAL OR OWNERS MANU | |
| Bulletin Number: 00-001-13-2748A | |
| MAZDA HAS DEVELOPED FACTORY RECOMMENDED SCHEDULED MAINTENANCE SERVICES THAT SUPPORT ALL MAJOR VEHICLE SYSTEMS. MAZDA RECOMMENDS DEALERS FOLLOW THE SCHEDULED MAINTENANCE TABLES AS CITED IN THE VEHICLE-SPECIFIC WORKSHOP MANUAL OR OWNERS MANU | |
| Bulletin Number: 00-001-18-3446 | |
| Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle-specific workshop manual or owner's manu | |
| Bulletin Number: 00-001-18-3446a | |
| Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle- specific workshop manual or owner's man | |
| Bulletin Number: 00-001-19-3560 | |
| Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle- specific workshop manual or owner's man | |
| Bulletin Number: 00-002-14-2936 | |
| MAZDA NORTH AMERICAN OPERATIONS RECEIVED MANY REQUESTS FROM OUR DEALERS ASKING US TO APPROVE ADDITIONAL ON-CAR BRAKE LATHES AS AN OPTION FOR MNAO AUTHORIZED EQUIPMENT. DUE TO YOUR FEEDBACK AND AFTER EVALUATING A FEW ON-CAR BRAKE LATHES, WE | |
| Bulletin Number: 00-002-19-3561 | |
| Mazda North American Operations has approved an additional on-car brake lathe as an option for MNAO authorized equipment. The Pro-Cut On-Car Brake Lathe has been added to the MNAO authorized equipment program. NOTE: Accu-turn is still an ap | |
| Bulletin Number: 00-003-18-3480 | |
| Mazda North American Operations has approved an additional on-car brake lathe as an option for MNAOauthorized equipment. The Pro-Cut On-Car Brake Lathe has been added to the MNAO authorizedequipment program.NOTE: Accu-turn is still an appro | |
| Bulletin Number: 00-003-18-3480a | |
| Mazda North American Operations has approved an additional on-car brake lathe as an option for MNAO authorized equipment. The Pro-Cut On-Car Brake Lathe has been added to the MNAO authorized equipment program. NOTE: Accu-turn is still an ap | |
| Bulletin Number: 00-003-19-3583 | |
| In support of the new MRT distribution, Mazda will ship to dealers a new Dual Purpose Diagnostic Leak Detector beginning March, 2019. Training videos will be posted to MGSS shortly and Workshop Manual procedures will be revised gradually. | |
| Bulletin Number: 00-004/12 | |
| SUMMARY TO BE PROVIDED ON A FUTURE DATE. | |
| Bulletin Number: 00-004-12-2741 | |
| MAZDA HAS DEVELOPED FACTORY RECOMMENDED SCHEDULED MAINTENANCE SERVICES THAT SUPPORT ALL MAJOR VEHICLE SYSTEMS. MAZDA RECOMMENDS DEALERS FOLLOW THE SCHEDULED MAINTENANCE TABLES AS CITED IN THE VEHICLE-SPECIFIC WORKSHOP MANUAL OR OWNERS MANU | |
| Bulletin Number: 00204 | |
| EVAPORATIVE EMMISSIONS AND RECIVER ADAPTERS. *EH | |
| Bulletin Number: 00307 | |
| AVAILABILITY OF NON-REQUIRED TOOLS. *KB | |
| Bulletin Number: 01-001-19-3551 | |
| This service bulletin provides testing and charging procedures in order to promote proper battery maintenance, to deliver new vehicles with fully charged batteries, and to reduce unnecessary battery replacement cost. For new vehicles in sto | |
| Bulletin Number: 01-002-19-3552 | |
| The Mazda GR8-1291 is required for all warranty battery testing. If the Mazda GR8-1291 is not used, incorrect battery testing may result in unnecessary battery replacement. Use the following test procedures in this Service Bulletin to test | |
| Bulletin Number: 01-003-15-3014 | |
| USE THE FOLLOWING REPAIR PROCEDURE TO MINIMIZE THE NEED TO REPLACE THE CATALYST CONVERTER/EXHAUST PIPE WHEN REMOVING OXYGEN SENSORS AND/OR AIR FUEL RATIO SENSORS. | |
| Bulletin Number: 01-004-19-3558 | |
| On some vehicles, a sulfur smell or 'rotten egg' odor may be noticed coming from the exhaust system. The odor is usually noticed after a cold start, fast idle, extended periods of idling and full throttle acceleration. Sulfur smell is not a | |
| Bulletin Number: 01-008-18-3451 | |
| This service bulletin provides testing and charging procedures in order to promote proper battery maintenance, to deliver new vehicles with fully charged batteries, and to reduce unnecessary battery replacement cost. For new vehicles in sto | |
| Bulletin Number: 01-009-18-3452 | |
| The Mazda GR8-1291 is required for all warranty battery testing. If the Mazda GR8-1291 is not used, incorrect battery testing may result in unnecessary battery replacement. Use the following test procedures in this Service Bulletin to test | |
| Bulletin Number: 01-016-18-3522 | |
| On some vehicles, a sulfur smell or 'rotten egg' odor may be noticed coming from the exhaust system. The odor is usually noticed after a cold start, fast idle, extended periods of idling and full throttle acceleration. Sulfur smell is not a | |
| Bulletin Number: 0102504 | |
| BATTERY TEST PROCEDURE REQUIREMENTS. *TT | |
| Bulletin Number: 02-001-13-2752 | |
| SOME CUSTOMERS MAY COMPLAIN OF SIGNS OF OIL ON THE STRUTS OR SHOCK ABSORBERS. IN MOST CASES THE OIL THAT IS PRESENT IS NORMAL, AND A RESULT OF THE OIL THAT REMAINS ON THE SHAFT DURING THE NORMAL SWEEPING PROCESS OF THE SHAFT SEAL. FOLLOW TH | |
| Bulletin Number: 02-001-19-3550 | |
| Some customers may complain of signs of oil on the struts or shock absorbers. In most cases the oil that is present is normal, and a result of the oil that remains on the shaft during the normal sweeping process of the shaft seal. Follow th | |
| Bulletin Number: 02-006-18-3449 | |
| Some customers may complain of signs of oil on the struts or shock absorbers. In most cases the oil that is present is normal, and a result of the oil that remains on the shaft during the normal sweeping process of the shaft seal. Follow th | |
| Bulletin Number: 0500103 | |
| CLUTCH CHATTER DURING COLD TAKEOFF. ON VEHICLES WITH MANUAL TRANSMISSIONS BUILT PRIOR TO 4/10/2003. *TT | |
| Bulletin Number: 0501202 | |
| 6-SPEED MANUAL TRANSMISSION WILL NOT SHIFT INTO 5TH OR REVERSE GEARS. *TT | |
| Bulletin Number: 07-002-13-2842 | |
| A MUSTY/MILDEW TYPE ODOR MAY COME FROM THE VENTS WHEN THE AIR CONDITIONING (A/C) SYSTEM IS OPERATING. IT IS MOST NOTICEABLE WHEN THE A/C IS FIRST TURNED ON. THIS ODOR IS THE RESULT OF MOLD GROWTH IN THE A/C EVAPORATOR/COOLING UNIT WHICH IS | |
| Bulletin Number: 07-002-18-3432 | |
| A musty/mildew type odor may come from the vents when the air conditioning (A/C) system is operating. It is most noticeable when the A/C is first turned ON. This odor is the result of mold growth in the A/Cevaporator/cooling unit which is c | |
| Bulletin Number: 07-002-19-3616 | |
| A musty/mildew type odor may come from the vents when the air conditioning (A/C) system is operating. It is most noticeable when the A/C is first turned ON. This odor is the result of mold growth in the A/C evaporator/cooling unit which is | |
| Bulletin Number: 0800306 | |
| NON GENUINE ACCESSORIES AFFECT AIR BAG OPERATION. *KB | |
| Bulletin Number: 0900104 | |
| PORT OR DEALER INSTALLED AUTO-DIMMING (ELECTRO-CHROMIC) MIRROR, WITH ELECTRONIC COMPASS, AMBIENT TEMPERATURE. *MR | |
| Bulletin Number: 09-001-16-3113 | |
| IF THE IMMOBILIZER UNIT LC62-67-5G2* OR DC69-67-5G2* NEEDS TO BE REPLACED WITH A NEW ONE, THESE PARTS ARE NO LONGER AVAILABLE. NEW ALTERNATIVE SERVICE PARTS KITS ARE NOW AVAILABLE, INCLUDING ALTERNATIVE IMMOBILIZER UNIT BJ3D-67-5G2L OR TC91 | |
| Bulletin Number: 09-002-19-3554 | |
| This service bulletin provides information regarding the proper use of the driver's floor mat to avoid anypotential interference with the foot pedals. The following are possible causes of floor mat interference,which can be avoided with pro | |
| Bulletin Number: 0900403 | |
| REAR WINDOW DEFROSTER GRID LINE REPAIR PROCEDURE. *TT | |
| Bulletin Number: 09-005-13-2781 | |
| THIS SERVICE BULLETIN PROVIDES INFORMATION REGARDING THE PROPER USE OF THE DRIVERS FLOOR MAT TO AVOID ANY POTEN-TIAL INTERFERENCE WITH THE FOOT PEDALS. THE FOLLOWING ARE POSSIBLE CAUSES OF FLOOR MAT INTERFERENCE, WHICH CAN BE AVOIDED WITH | |
| Bulletin Number: 09-005-19-3562 | |
| When encountering a vehicle with paint damage, refer to the "Mazda Pocket Paint Guide" to determine cause, prevention, remedy, and warranty coverage (if applicable). Copies of the Mazda Pocket Paint Guide are available for order on Mazda e- | |
| Bulletin Number: 09-009-19-3566 | |
| In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer's responsibility to co | |
| Bulletin Number: 0901304 | |
| RATTLING NOISE FROM DRIVER'S OR PASSENGER'S DOOR WHEN DRIVING ON A ROUGH ROAD OR CLOSING THE DOOR. *TT | |
| Bulletin Number: 09-014-18-3443 | |
| When encountering a vehicle with paint damage, refer to the "Mazda Pocket Paint Guide" to determine cause, prevention, remedy, and warranty coverage (if applicable). | |
| Bulletin Number: 09-014-18-3443a | |
| When encountering a vehicle with paint damage, refer to the "Mazda Pocket Paint Guide" to determine cause, prevention, remedy, and warranty coverage (if applicable). Copies of the Mazda Pocket Paint Guide are available for order on Mazda e- | |
| Bulletin Number: 09-019-18-3450 | |
| This service bulletin provides information regarding the proper use of the driver's floor mat to avoid any potential interference with the foot pedals. The following are possible causes of floor mat interference, which can be avoided with p | |
| Bulletin Number: 0902604 | |
| SPEEDOMETER REPLACEMENT PROCEDURE. *TT | |
| Bulletin Number: 09-027-14-2935 | |
| THIS SERVICE BULLETIN PROVIDES INFORMATION REGARDING THE PROPER USE OF THE DRIVERS FLOOR MAT TO AVOID ANY POTENTIAL INTERFERENCE WITH THE FOOT PEDALS. THE FOLLOWING ARE POSSIBLE CAUSES OF FLOOR MAT INTERFERENCE, WHICH CAN BE AVOIDED WITH P | |
| Bulletin Number: 09-034-14-2956 | |
| IN ACCORDANCE WITH FEDERAL REGULATIONS, FOLLOW THE PROCEDURE LISTED BELOW WHEN REPLACING A SPEEDOMETER.NOTE:MAZDA VEHICLES ARE MANUFACTURED WITH TAMPER-PROOF SPEEDOMETERS.WHEN A SPEEDOMETER IS REPLACED, THE NEW SPEEDOMETER WILL READ ZERO | |
| Bulletin Number: 09-034-18-3430 | |
| In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer's responsibility to co | |
| Bulletin Number: 09-034-18-3430a | |
| In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer's responsibility to co | |
| Bulletin Number: 09-035-17-3080 | |
| In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer?s responsibility to co | |
| Bulletin Number: 1003E | |
| EMISSION RECALL CAMPAIGN 1003E - CHECK ENGINE LIGHT MAY ERRONEOUSLY ILLUMINATE AND A DIAGNOSTIC TROUBLE CODE P2404 OR P0456 MAY BE STORED INDICATING A PROBLEM IN THE EMISSIONS CONTROL SYSTEM WHEN NO PROBLEM EXISTS, OR THE CHECK ENGINE LIGHT | |
| Bulletin Number: MT-012-18 | |
| If a vehicle has body vibration or steering wheel shimmy while driving and the root cause is determined to be tire balance, re-balance the tires using a Hunter GSP9700 or equivalent balance machine. If your dealer does not have a GSP9700 or | |
| Bulletin Number: SA-061-17 | |
| In an effort to achieve a higher level of Customer Experience and retain the value of Mazda's vehicles, MNAO Warranty Operations is© 2017 Mazda North American Operations, U.S.A. allowing all Mazda dealers to utilize a third party, SPECMO En | |
| Bulletin Number: SB-09-005-13 | |
| MAZDA: ON SOME VEHICLES, TO AVOID POTENTIAL INTERFERENCE OF FOOT PLACED ON PEDALS, INFORMATION IS PROVIDED REGARDING PROPER USE, AND PLACEMENT, OF DRIVER'S FLOOR MAT. VARIOUS MODELS AND MODEL YEARS. *PE | |
| 2003 MAZDA MILLENIA | |
| Bulletin Number: 02-001-13-2752 | |
| SOME CUSTOMERS MAY COMPLAIN OF SIGNS OF OIL ON THE STRUTS OR SHOCK ABSORBERS. IN MOST CASES THE OIL THAT IS PRESENT IS NORMAL, AND A RESULT OF THE OIL THAT REMAINS ON THE SHAFT DURING THE NORMAL SWEEPING PROCESS OF THE SHAFT SEAL. FOLLOW TH | |
| Bulletin Number: 0900104 | |
| PORT OR DEALER INSTALLED AUTO-DIMMING (ELECTRO-CHROMIC) MIRROR, WITH ELECTRONIC COMPASS, AMBIENT TEMPERATURE. *MR | |
| Bulletin Number: SA-061-17 | |
| In an effort to achieve a higher level of Customer Experience and retain the value of Mazda's vehicles, MNAO Warranty Operations is© 2017 Mazda North American Operations, U.S.A. allowing all Mazda dealers to utilize a third party, SPECMO En | |
| 2003 MAZDA MPV | |
| Bulletin Number: 00-001-13-2748 | |
| MAZDA HAS DEVELOPED FACTORY RECOMMENDED SCHEDULED MAINTENANCE SERVICES THAT SUPPORT ALL MAJOR VEHICLE SYSTEMS. MAZDA RECOMMENDS DEALERS FOLLOW THE SCHEDULED MAINTENANCE TABLES AS CITED IN THE VEHICLE-SPECIFIC WORKSHOP MANUAL OR OWNERS MANU | |
| Bulletin Number: 00-001-13-2748A | |
| MAZDA HAS DEVELOPED FACTORY RECOMMENDED SCHEDULED MAINTENANCE SERVICES THAT SUPPORT ALL MAJOR VEHICLE SYSTEMS. MAZDA RECOMMENDS DEALERS FOLLOW THE SCHEDULED MAINTENANCE TABLES AS CITED IN THE VEHICLE-SPECIFIC WORKSHOP MANUAL OR OWNERS MANU | |
| Bulletin Number: 00-001-18-3446 | |
| Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle-specific workshop manual or owner's manu | |
| Bulletin Number: 00-001-18-3446a | |
| Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle- specific workshop manual or owner's man | |
| Bulletin Number: 00-001-19-3560 | |
| Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle- specific workshop manual or owner's man | |
| Bulletin Number: 00-002-14-2936 | |
| MAZDA NORTH AMERICAN OPERATIONS RECEIVED MANY REQUESTS FROM OUR DEALERS ASKING US TO APPROVE ADDITIONAL ON-CAR BRAKE LATHES AS AN OPTION FOR MNAO AUTHORIZED EQUIPMENT. DUE TO YOUR FEEDBACK AND AFTER EVALUATING A FEW ON-CAR BRAKE LATHES, WE | |
| Bulletin Number: 00-002-19-3561 | |
| Mazda North American Operations has approved an additional on-car brake lathe as an option for MNAO authorized equipment. The Pro-Cut On-Car Brake Lathe has been added to the MNAO authorized equipment program. NOTE: Accu-turn is still an ap | |
| Bulletin Number: 00-003-18-3480 | |
| Mazda North American Operations has approved an additional on-car brake lathe as an option for MNAOauthorized equipment. The Pro-Cut On-Car Brake Lathe has been added to the MNAO authorizedequipment program.NOTE: Accu-turn is still an appro | |
| Bulletin Number: 00-003-18-3480a | |
| Mazda North American Operations has approved an additional on-car brake lathe as an option for MNAO authorized equipment. The Pro-Cut On-Car Brake Lathe has been added to the MNAO authorized equipment program. NOTE: Accu-turn is still an ap | |
| Bulletin Number: 00-004/12 | |
| SUMMARY TO BE PROVIDED ON A FUTURE DATE. | |
| Bulletin Number: 00-004-12-2741 | |
| MAZDA HAS DEVELOPED FACTORY RECOMMENDED SCHEDULED MAINTENANCE SERVICES THAT SUPPORT ALL MAJOR VEHICLE SYSTEMS. MAZDA RECOMMENDS DEALERS FOLLOW THE SCHEDULED MAINTENANCE TABLES AS CITED IN THE VEHICLE-SPECIFIC WORKSHOP MANUAL OR OWNERS MANU | |
| Bulletin Number: 00-004-16-3237 | |
| RAISING A VEHICLE WITH A JACK CAN BE DANGEROUS IF NOT DONE PROPERLY. THE VEHICLE CAN SLIP OFF THE JACK AND SERI-OUSLY INJURE SOMEONE. IN THIS SERVICE INFORMATION, SOME IMPORTANT WARNINGS AND CAUTIONS HAVE BEEN TAKEN FROM THE OWNERS MANUAL. | |
| Bulletin Number: 0004180 | |
| B29 AND LATER POWERTRAIN CONTROL MODULE (PCM) CALIBRATION UPDATE INFORMATION. REPAIR INFORMATION REVIEW1. *TT | |
| Bulletin Number: 00204 | |
| EVAPORATIVE EMMISSIONS AND RECIVER ADAPTERS. *EH | |
| Bulletin Number: 00307 | |
| AVAILABILITY OF NON-REQUIRED TOOLS. *KB | |
| Bulletin Number: 01-001-19-3551 | |
| This service bulletin provides testing and charging procedures in order to promote proper battery maintenance, to deliver new vehicles with fully charged batteries, and to reduce unnecessary battery replacement cost. For new vehicles in sto | |
| Bulletin Number: 01-002-19-3552 | |
| The Mazda GR8-1291 is required for all warranty battery testing. If the Mazda GR8-1291 is not used, incorrect battery testing may result in unnecessary battery replacement. Use the following test procedures in this Service Bulletin to test | |
| Bulletin Number: 01-003-15-3014 | |
| USE THE FOLLOWING REPAIR PROCEDURE TO MINIMIZE THE NEED TO REPLACE THE CATALYST CONVERTER/EXHAUST PIPE WHEN REMOVING OXYGEN SENSORS AND/OR AIR FUEL RATIO SENSORS. | |
| Bulletin Number: 01-004-19-3558 | |
| On some vehicles, a sulfur smell or 'rotten egg' odor may be noticed coming from the exhaust system. The odor is usually noticed after a cold start, fast idle, extended periods of idling and full throttle acceleration. Sulfur smell is not a | |
| Bulletin Number: 01-008-18-3451 | |
| This service bulletin provides testing and charging procedures in order to promote proper battery maintenance, to deliver new vehicles with fully charged batteries, and to reduce unnecessary battery replacement cost. For new vehicles in sto | |
| Bulletin Number: 01-009-18-3452 | |
| The Mazda GR8-1291 is required for all warranty battery testing. If the Mazda GR8-1291 is not used, incorrect battery testing may result in unnecessary battery replacement. Use the following test procedures in this Service Bulletin to test | |
| Bulletin Number: 010104 | |
| IT IS POSSIBLE THAT THE SOLDERING STRENGTH ON A TERMINAL IN THE FAN CONTROL MODULE MAY BE INSUFFICIENT, CAUSING A CRACK DURING USE. FAN CONTROL MODULE SPECIAL SERVICE PROGRAM (SSP)60. *NM | |
| Bulletin Number: 0101203 | |
| TAPPET (TICK) NOISE FROM ENGINE. *TT | |
| Bulletin Number: 01-016-18-3522 | |
| On some vehicles, a sulfur smell or 'rotten egg' odor may be noticed coming from the exhaust system. The odor is usually noticed after a cold start, fast idle, extended periods of idling and full throttle acceleration. Sulfur smell is not a | |
| Bulletin Number: 0101904 | |
| MALFUNCTION INDICATOR LAMP (MIL) ILLUMINATION WITH DIAGNOSTIC TROUBLE CODES (DTCS) P2404 / P0446. *TT | |
| Bulletin Number: 0102103 | |
| METAL SNAP OR POPPING NOISE FROM ENGINE. *EH | |
| Bulletin Number: 0102103 | |
| STICK / SLIP NOISE FROM ENGINE. *TT | |
| Bulletin Number: 0102504 | |
| BATTERY TEST PROCEDURE REQUIREMENTS. *TT | |
| Bulletin Number: 0103305 | |
| ENGINE NO START IN EXTREME COLD WEATHER. *TT | |
| Bulletin Number: 0103504 | |
| ENGINE PINGING DURING ACCELERATION AND/OR LIGHT THROTTLE CRUISING. *TT | |
| Bulletin Number: 0105406 | |
| ENGINE HARD TO START, RUNS ROUGH. *KB | |
| Bulletin Number: 02-001-13-2752 | |
| SOME CUSTOMERS MAY COMPLAIN OF SIGNS OF OIL ON THE STRUTS OR SHOCK ABSORBERS. IN MOST CASES THE OIL THAT IS PRESENT IS NORMAL, AND A RESULT OF THE OIL THAT REMAINS ON THE SHAFT DURING THE NORMAL SWEEPING PROCESS OF THE SHAFT SEAL. FOLLOW TH | |
| Bulletin Number: 02-001-19-3550 | |
| Some customers may complain of signs of oil on the struts or shock absorbers. In most cases the oil that is present is normal, and a result of the oil that remains on the shaft during the normal sweeping process of the shaft seal. Follow th | |
| Bulletin Number: 02-006-18-3449 | |
| Some customers may complain of signs of oil on the struts or shock absorbers. In most cases the oil that is present is normal, and a result of the oil that remains on the shaft during the normal sweeping process of the shaft seal. Follow th | |
| Bulletin Number: 0400103 | |
| FRONT BRAKE CLUNKING NOISE. *TT | |
| Bulletin Number: 0500104 | |
| AUTOMATIC TRANSAXLE MAY EXHIBIT SHIFT SHOCK WHILE THE ENGINE WARMS FROM COLD TO NORMAL. *TT | |
| Bulletin Number: 0500105 | |
| O/D OFF INDICATOR LIGHT FLASHING / MALFUNCTION INDICATOR LAMP (MIL) WITH DIAGNOSTIC TROUBLE CODE (DTC) P0706. *TT | |
| Bulletin Number: 0500304 | |
| MAZDA SPECIAL PROGRAM (MSP03) - SHIFT SHOCK - TRANSMISSION CONTROL MODULE (TCM) REFLASH. VEHICLES BUILT FROM 4/1/03 THROUGH 1/26/04. *NJ | |
| Bulletin Number: 0500603 | |
| MALFUNCTION INDICATOR LAMP (MIL) ILLUMINATION WITH DIAGNOSTIC TROUBLE CODE (DTC) P0706. THIS BULLETIN SUPERSEDES 01-023/03 ISSUED 10/15/03. *TT | |
| Bulletin Number: 05-006-14-2917 | |
| THE VEHICLES AUTOMATIC TRANSAXLE (ATX) MAY EXHIBIT SHIFT SHOCK WHILE THE ENGINE WARMS FROM COLD TO NORMAL OPERATING TEMPERATURE. THE SYMPTOM IS INTERMITTENT, IT DOES NOT OCCUR ALL THE TIME. THE SHIFT SHOCK USUALLY OCCURS DURING 1-2 OR 2-3 | |
| Bulletin Number: 05-007-14-2918 | |
| THE VEHICLES AUTOMATIC TRANSAXLE (ATX) MAY EXHIBIT SHIFT SHOCK WHILE THE ENGINE WARMS FROM COLD TO NORMAL OPERATING TEMPERATURE. THE SYMPTOM IS INTERMITTENT, IT DOES NOT OCCUR ALL THE TIME. THE SHIFT SHOCK USUALLY OCCURS DURING 1-2 OR 2-3 | |
| Bulletin Number: 0700104 | |
| AIR TEMPERATURE OUTPUT DIFFERENCE BETWEEN CENTER DASH VENTS. *MR THIS BULLETIN REPLACED THE PREVIOUS BULLETIN ISSUED ON 02/12/04. *TT | |
| Bulletin Number: 07-002-13-2842 | |
| A MUSTY/MILDEW TYPE ODOR MAY COME FROM THE VENTS WHEN THE AIR CONDITIONING (A/C) SYSTEM IS OPERATING. IT IS MOST NOTICEABLE WHEN THE A/C IS FIRST TURNED ON. THIS ODOR IS THE RESULT OF MOLD GROWTH IN THE A/C EVAPORATOR/COOLING UNIT WHICH IS | |
| Bulletin Number: 07-002-18-3432 | |
| A musty/mildew type odor may come from the vents when the air conditioning (A/C) system is operating. It is most noticeable when the A/C is first turned ON. This odor is the result of mold growth in the A/Cevaporator/cooling unit which is c | |
| Bulletin Number: 07-002-19-3616 | |
| A musty/mildew type odor may come from the vents when the air conditioning (A/C) system is operating. It is most noticeable when the A/C is first turned ON. This odor is the result of mold growth in the A/C evaporator/cooling unit which is | |
| Bulletin Number: 0700304 | |
| COOLANT SEEPAGE FROM REAR HEATER PIPE. *TT | |
| Bulletin Number: 0700403 | |
| CORROSION ON REAR HEATER PIPE. *PH WARRANTY EXTENSION. *TT | |
| Bulletin Number: 0700404 | |
| LACK OF WARM AIR FROM FRONT HEATER. *TT | |
| Bulletin Number: 0800306 | |
| NON GENUINE ACCESSORIES AFFECT AIR BAG OPERATION. *KB | |
| Bulletin Number: 08022004 | |
| DEALER NOTICE - SERVICE BULLETIN RELEASE. *TT | |
| Bulletin Number: 08262004 | |
| DEALER NOTICE - SERVICE BULLETIN RELEASE - 08/26/2004. *TT | |
| Bulletin Number: 0900104 | |
| PORT OR DEALER INSTALLED AUTO-DIMMING (ELECTRO-CHROMIC) MIRROR, WITH ELECTRONIC COMPASS, AMBIENT TEMPERATURE. *MR | |
| Bulletin Number: 09-001/16 | |
| SUMMARY TO BE PROVIDED ON A FUTURE DATE. | |
| Bulletin Number: 09-001-16-3113 | |
| IF THE IMMOBILIZER UNIT LC62-67-5G2* OR DC69-67-5G2* NEEDS TO BE REPLACED WITH A NEW ONE, THESE PARTS ARE NO LONGER AVAILABLE. NEW ALTERNATIVE SERVICE PARTS KITS ARE NOW AVAILABLE, INCLUDING ALTERNATIVE IMMOBILIZER UNIT BJ3D-67-5G2L OR TC91 | |
| Bulletin Number: 09-002-19-3554 | |
| This service bulletin provides information regarding the proper use of the driver's floor mat to avoid anypotential interference with the foot pedals. The following are possible causes of floor mat interference,which can be avoided with pro | |
| Bulletin Number: 0900403 | |
| REAR WINDOW DEFROSTER GRID LINE REPAIR PROCEDURE. *TT | |
| Bulletin Number: 09-005-13-2781 | |
| THIS SERVICE BULLETIN PROVIDES INFORMATION REGARDING THE PROPER USE OF THE DRIVERS FLOOR MAT TO AVOID ANY POTEN-TIAL INTERFERENCE WITH THE FOOT PEDALS. THE FOLLOWING ARE POSSIBLE CAUSES OF FLOOR MAT INTERFERENCE, WHICH CAN BE AVOIDED WITH | |
| Bulletin Number: 09-005-19-3562 | |
| When encountering a vehicle with paint damage, refer to the "Mazda Pocket Paint Guide" to determine cause, prevention, remedy, and warranty coverage (if applicable). Copies of the Mazda Pocket Paint Guide are available for order on Mazda e- | |
| Bulletin Number: 09-009-19-3566 | |
| In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer's responsibility to co | |
| Bulletin Number: 0901105 | |
| POWER WINDOWS INOPERATIVE - BLOWN FUSE. TO INCLUDE 2006 MAZDA MPV. *TT | |
| Bulletin Number: 0901402 | |
| ACCESSORY REAR CARGO NET HOOKS DETACH. *TT | |
| Bulletin Number: 0901405 | |
| RATTLING NOISE FROM 2ND-ROW SEATS. *SC | |
| Bulletin Number: 09-014-18-3443 | |
| When encountering a vehicle with paint damage, refer to the "Mazda Pocket Paint Guide" to determine cause, prevention, remedy, and warranty coverage (if applicable). | |
| Bulletin Number: 09-014-18-3443a | |
| When encountering a vehicle with paint damage, refer to the "Mazda Pocket Paint Guide" to determine cause, prevention, remedy, and warranty coverage (if applicable). Copies of the Mazda Pocket Paint Guide are available for order on Mazda e- | |
| Bulletin Number: 0901904 | |
| LOOSE REAR QUARTER WINDOW GLASS. *MJ | |
| Bulletin Number: 09-019-18-3450 | |
| This service bulletin provides information regarding the proper use of the driver's floor mat to avoid any potential interference with the foot pedals. The following are possible causes of floor mat interference, which can be avoided with p | |
| Bulletin Number: 0902604 | |
| SPEEDOMETER REPLACEMENT PROCEDURE. *TT | |
| Bulletin Number: 0902605 | |
| POWER SLIDING DOOR (PSD) RE-OPENS AFTER STARTING TO CLOSE AND LATCH. *TT | |
| Bulletin Number: 09-027-14-2935 | |
| THIS SERVICE BULLETIN PROVIDES INFORMATION REGARDING THE PROPER USE OF THE DRIVERS FLOOR MAT TO AVOID ANY POTENTIAL INTERFERENCE WITH THE FOOT PEDALS. THE FOLLOWING ARE POSSIBLE CAUSES OF FLOOR MAT INTERFERENCE, WHICH CAN BE AVOIDED WITH P | |
| Bulletin Number: 0902904 | |
| POPPING NOISE FROM FRONT SUSPENSION WHEN DRIVING OVER BUMPS. *TT | |
| Bulletin Number: 0903304 | |
| REAR COMBINATION LAMP REMOVAL CAUTION. *TT | |
| Bulletin Number: 09-034-14-2956 | |
| IN ACCORDANCE WITH FEDERAL REGULATIONS, FOLLOW THE PROCEDURE LISTED BELOW WHEN REPLACING A SPEEDOMETER.NOTE:MAZDA VEHICLES ARE MANUFACTURED WITH TAMPER-PROOF SPEEDOMETERS.WHEN A SPEEDOMETER IS REPLACED, THE NEW SPEEDOMETER WILL READ ZERO | |
| Bulletin Number: 09-034-18-3430 | |
| In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer's responsibility to co | |
| Bulletin Number: 09-034-18-3430a | |
| In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer's responsibility to co | |
| Bulletin Number: 09-035-17-3080 | |
| In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer?s responsibility to co | |
| Bulletin Number: 0903804 | |
| POWER SLIDING DOOR (PSD) DRIVE MODULE REMOVAL / INSTALLATION PROCEDURES. *TT | |
| Bulletin Number: 0904004 | |
| POWER SLIDING DOOR (PSD) SYSTEM SERVICE TIPS DUE TO INOPERATIVE OR IMPROPER POWER SLIDING DOOR (PSD) OPERATION. *TT | |
| Bulletin Number: 2204H | |
| THE POSITIVE CRANKCASE VENTILATION (PCV) HOSE MAY FAIL, CAUSING ROUGH IDLING AND/OR THE MALFUNCTION INDICATOR LAMP (MIL) TO ILLUMINATE. EMISSION RECALL 2204H LETTER TO DEALER; ATTACHMENT I DEALER INFORMATION; ATTACHMENT II; ATTACHMENT III | |
| Bulletin Number: MT-012-18 | |
| If a vehicle has body vibration or steering wheel shimmy while driving and the root cause is determined to be tire balance, re-balance the tires using a Hunter GSP9700 or equivalent balance machine. If your dealer does not have a GSP9700 or | |
| Bulletin Number: RF-18-03 | |
| EXHAUST PIPE GASKET OPEN END: There has been some concern with the open end of hoop design being considered a defect in the gasket for P/N AJ17-40-305. The end of this ?hoop? is intentionally modified to press fix the gasket on the exhaust | |
| Bulletin Number: SA-061-17 | |
| In an effort to achieve a higher level of Customer Experience and retain the value of Mazda's vehicles, MNAO Warranty Operations is© 2017 Mazda North American Operations, U.S.A. allowing all Mazda dealers to utilize a third party, SPECMO En | |
| Bulletin Number: SB-09-005-13 | |
| MAZDA: ON SOME VEHICLES, TO AVOID POTENTIAL INTERFERENCE OF FOOT PLACED ON PEDALS, INFORMATION IS PROVIDED REGARDING PROPER USE, AND PLACEMENT, OF DRIVER'S FLOOR MAT. VARIOUS MODELS AND MODEL YEARS. *PE | |
| 2003 MAZDA MX-5 | |
| Bulletin Number: 09-001/16 | |
| SUMMARY TO BE PROVIDED ON A FUTURE DATE. | |
| 2003 MAZDA PROTEGE | |
| Bulletin Number: 00-001-13-2748 | |
| MAZDA HAS DEVELOPED FACTORY RECOMMENDED SCHEDULED MAINTENANCE SERVICES THAT SUPPORT ALL MAJOR VEHICLE SYSTEMS. MAZDA RECOMMENDS DEALERS FOLLOW THE SCHEDULED MAINTENANCE TABLES AS CITED IN THE VEHICLE-SPECIFIC WORKSHOP MANUAL OR OWNERS MANU | |
| Bulletin Number: 00-001-13-2748A | |
| MAZDA HAS DEVELOPED FACTORY RECOMMENDED SCHEDULED MAINTENANCE SERVICES THAT SUPPORT ALL MAJOR VEHICLE SYSTEMS. MAZDA RECOMMENDS DEALERS FOLLOW THE SCHEDULED MAINTENANCE TABLES AS CITED IN THE VEHICLE-SPECIFIC WORKSHOP MANUAL OR OWNERS MANU | |
| Bulletin Number: 00-001-18-3446 | |
| Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle-specific workshop manual or owner's manu | |
| Bulletin Number: 00-001-18-3446a | |
| Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle- specific workshop manual or owner's man | |
| Bulletin Number: 00-001-19-3560 | |
| Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle- specific workshop manual or owner's man | |
| Bulletin Number: 00-002-14-2936 | |
| MAZDA NORTH AMERICAN OPERATIONS RECEIVED MANY REQUESTS FROM OUR DEALERS ASKING US TO APPROVE ADDITIONAL ON-CAR BRAKE LATHES AS AN OPTION FOR MNAO AUTHORIZED EQUIPMENT. DUE TO YOUR FEEDBACK AND AFTER EVALUATING A FEW ON-CAR BRAKE LATHES, WE | |
| Bulletin Number: 00-002-19-3561 | |
| Mazda North American Operations has approved an additional on-car brake lathe as an option for MNAO authorized equipment. The Pro-Cut On-Car Brake Lathe has been added to the MNAO authorized equipment program. NOTE: Accu-turn is still an ap | |
| Bulletin Number: 00-003-18-3480 | |
| Mazda North American Operations has approved an additional on-car brake lathe as an option for MNAOauthorized equipment. The Pro-Cut On-Car Brake Lathe has been added to the MNAO authorizedequipment program.NOTE: Accu-turn is still an appro | |
| Bulletin Number: 00-003-18-3480a | |
| Mazda North American Operations has approved an additional on-car brake lathe as an option for MNAO authorized equipment. The Pro-Cut On-Car Brake Lathe has been added to the MNAO authorized equipment program. NOTE: Accu-turn is still an ap | |
| Bulletin Number: 00-003-19-3583 | |
| In support of the new MRT distribution, Mazda will ship to dealers a new Dual Purpose Diagnostic Leak Detector beginning March, 2019. Training videos will be posted to MGSS shortly and Workshop Manual procedures will be revised gradually. | |
| Bulletin Number: 00-004/12 | |
| SUMMARY TO BE PROVIDED ON A FUTURE DATE. | |
| Bulletin Number: 00-004-12-2741 | |
| MAZDA HAS DEVELOPED FACTORY RECOMMENDED SCHEDULED MAINTENANCE SERVICES THAT SUPPORT ALL MAJOR VEHICLE SYSTEMS. MAZDA RECOMMENDS DEALERS FOLLOW THE SCHEDULED MAINTENANCE TABLES AS CITED IN THE VEHICLE-SPECIFIC WORKSHOP MANUAL OR OWNERS MANU | |
| Bulletin Number: 00-004-16-3237 | |
| RAISING A VEHICLE WITH A JACK CAN BE DANGEROUS IF NOT DONE PROPERLY. THE VEHICLE CAN SLIP OFF THE JACK AND SERI-OUSLY INJURE SOMEONE. IN THIS SERVICE INFORMATION, SOME IMPORTANT WARNINGS AND CAUTIONS HAVE BEEN TAKEN FROM THE OWNERS MANUAL. | |
| Bulletin Number: 0004123 | |
| B28 AND LATER PCM CALIBRATION UPDATE INFORMATION. REPAIR INFORMATION REVIEW1. *TT | |
| Bulletin Number: 00204 | |
| EVAPORATIVE EMMISSIONS AND RECIVER ADAPTERS. *EH | |
| Bulletin Number: 00307 | |
| AVAILABILITY OF NON-REQUIRED TOOLS. *KB | |
| Bulletin Number: 01-001-19-3551 | |
| This service bulletin provides testing and charging procedures in order to promote proper battery maintenance, to deliver new vehicles with fully charged batteries, and to reduce unnecessary battery replacement cost. For new vehicles in sto | |
| Bulletin Number: 0100207 | |
| WHISTLE NOISE AT IDLE, FUEL CUT UNDER BOOST, MIL ILLUMINATED, DTC P0171 SET. *KB | |
| Bulletin Number: 01-002-19-3552 | |
| The Mazda GR8-1291 is required for all warranty battery testing. If the Mazda GR8-1291 is not used, incorrect battery testing may result in unnecessary battery replacement. Use the following test procedures in this Service Bulletin to test | |
| Bulletin Number: 01-003-15-3014 | |
| USE THE FOLLOWING REPAIR PROCEDURE TO MINIMIZE THE NEED TO REPLACE THE CATALYST CONVERTER/EXHAUST PIPE WHEN REMOVING OXYGEN SENSORS AND/OR AIR FUEL RATIO SENSORS. | |
| Bulletin Number: 0100403 | |
| ENGINE RATTLE NOISE AT 1000 - 3000 RPM COLD ENGINE. *TT | |
| Bulletin Number: 01-004-19-3558 | |
| On some vehicles, a sulfur smell or 'rotten egg' odor may be noticed coming from the exhaust system. The odor is usually noticed after a cold start, fast idle, extended periods of idling and full throttle acceleration. Sulfur smell is not a | |
| Bulletin Number: 01-008-18-3451 | |
| This service bulletin provides testing and charging procedures in order to promote proper battery maintenance, to deliver new vehicles with fully charged batteries, and to reduce unnecessary battery replacement cost. For new vehicles in sto | |
| Bulletin Number: 0100904 | |
| ENGINE HARD TO START. *MR | |
| Bulletin Number: 01-009-18-3452 | |
| The Mazda GR8-1291 is required for all warranty battery testing. If the Mazda GR8-1291 is not used, incorrect battery testing may result in unnecessary battery replacement. Use the following test procedures in this Service Bulletin to test | |
| Bulletin Number: 0101107 | |
| CONVERTER ASSEMBLY BREAKS AT WELD. *KB | |
| Bulletin Number: 01-016-18-3522 | |
| On some vehicles, a sulfur smell or 'rotten egg' odor may be noticed coming from the exhaust system. The odor is usually noticed after a cold start, fast idle, extended periods of idling and full throttle acceleration. Sulfur smell is not a | |
| Bulletin Number: 0102203 | |
| HESITATION AND/OR INTERMITTENT STUMBLE UNDER ACCELERATION. *TT UPDATE. *TT | |
| Bulletin Number: 0102504 | |
| BATTERY TEST PROCEDURE REQUIREMENTS. *TT | |
| Bulletin Number: 0102803 | |
| MALFUNCTION INDICATOR LIGHT (MIL) ILLUMINATION WITH DIAGNOSTIC TROUBLE CODE (DTC) P0507 STORED IN MEMORY. VARIOUS MODELS INCLUDING THE MP3, AND MAZDASPEED 2001-2003. *TT | |
| Bulletin Number: 0103406 | |
| WHISTLE NOISE AT IDLE FUEL CUT UNDER BOOST, MIL ILLUMINATED, DTC P0171 SET. *KB | |
| Bulletin Number: 02-001-13-2752 | |
| SOME CUSTOMERS MAY COMPLAIN OF SIGNS OF OIL ON THE STRUTS OR SHOCK ABSORBERS. IN MOST CASES THE OIL THAT IS PRESENT IS NORMAL, AND A RESULT OF THE OIL THAT REMAINS ON THE SHAFT DURING THE NORMAL SWEEPING PROCESS OF THE SHAFT SEAL. FOLLOW TH | |
| Bulletin Number: 02-001-19-3550 | |
| Some customers may complain of signs of oil on the struts or shock absorbers. In most cases the oil that is present is normal, and a result of the oil that remains on the shaft during the normal sweeping process of the shaft seal. Follow th | |
| Bulletin Number: 0200303 | |
| A CLUNK/KNOCK NOISE CAN BE HEARD FROM THE REAR STABILIZER BAR WHEN DRIVING OVER UNEVEN ROAD SURFACE SUCH AS SPEED BUMPS. 2001 MP3 PROTEGE & 2003-2003.5 MAZDASPEED PROTEGE. *TT | |
| Bulletin Number: 02-006-18-3449 | |
| Some customers may complain of signs of oil on the struts or shock absorbers. In most cases the oil that is present is normal, and a result of the oil that remains on the shaft during the normal sweeping process of the shaft seal. Follow th | |
| Bulletin Number: 0500204 | |
| CRACKING OF THE A/T GEAR INDICATOR LETTERING PLATE. MODELS TO INCLUDE ARE MAZDA PROTEGE5 2001-2003. *TT | |
| Bulletin Number: 06012004 | |
| PROGRAMMABLE MODULE INSTALLATION. ( 2004 MAZDA B SERIES) *JB | |
| Bulletin Number: 07-002-13-2842 | |
| A MUSTY/MILDEW TYPE ODOR MAY COME FROM THE VENTS WHEN THE AIR CONDITIONING (A/C) SYSTEM IS OPERATING. IT IS MOST NOTICEABLE WHEN THE A/C IS FIRST TURNED ON. THIS ODOR IS THE RESULT OF MOLD GROWTH IN THE A/C EVAPORATOR/COOLING UNIT WHICH IS | |
| Bulletin Number: 07-002-18-3432 | |
| A musty/mildew type odor may come from the vents when the air conditioning (A/C) system is operating. It is most noticeable when the A/C is first turned ON. This odor is the result of mold growth in the A/Cevaporator/cooling unit which is c | |
| Bulletin Number: 07-002-19-3616 | |
| A musty/mildew type odor may come from the vents when the air conditioning (A/C) system is operating. It is most noticeable when the A/C is first turned ON. This odor is the result of mold growth in the A/C evaporator/cooling unit which is | |
| Bulletin Number: 0700503 | |
| A/C SWITCH LIGHT GOES OUT AND / OR FLASHES WITH FAN CONTROL SPEED IN NUMBER 2 POSITION. *PH | |
| Bulletin Number: 0800306 | |
| NON GENUINE ACCESSORIES AFFECT AIR BAG OPERATION. *KB | |
| Bulletin Number: 0900104 | |
| PORT OR DEALER INSTALLED AUTO-DIMMING (ELECTRO-CHROMIC) MIRROR, WITH ELECTRONIC COMPASS, AMBIENT TEMPERATURE. *MR | |
| Bulletin Number: 0900203 | |
| ROOF RACK CROSS BAR REMOVAL AND INSTALLATION INSTRUCTIONS. *TT | |
| Bulletin Number: 09-002-19-3554 | |
| This service bulletin provides information regarding the proper use of the driver's floor mat to avoid anypotential interference with the foot pedals. The following are possible causes of floor mat interference,which can be avoided with pro | |
| Bulletin Number: 0900403 | |
| REAR WINDOW DEFROSTER GRID LINE REPAIR PROCEDURE. *TT | |
| Bulletin Number: 09-005-13-2781 | |
| THIS SERVICE BULLETIN PROVIDES INFORMATION REGARDING THE PROPER USE OF THE DRIVERS FLOOR MAT TO AVOID ANY POTEN-TIAL INTERFERENCE WITH THE FOOT PEDALS. THE FOLLOWING ARE POSSIBLE CAUSES OF FLOOR MAT INTERFERENCE, WHICH CAN BE AVOIDED WITH | |
| Bulletin Number: 09-005-19-3562 | |
| When encountering a vehicle with paint damage, refer to the "Mazda Pocket Paint Guide" to determine cause, prevention, remedy, and warranty coverage (if applicable). Copies of the Mazda Pocket Paint Guide are available for order on Mazda e- | |
| Bulletin Number: 09-009-19-3566 | |
| In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer's responsibility to co | |
| Bulletin Number: 0901404 | |
| UNUSUAL NOISE AND/OR EXCESSIVE EFFORT REQUIRED WHEN OPERATING LIFTGATE. *TT | |
| Bulletin Number: 09-014-18-3443 | |
| When encountering a vehicle with paint damage, refer to the "Mazda Pocket Paint Guide" to determine cause, prevention, remedy, and warranty coverage (if applicable). | |
| Bulletin Number: 09-014-18-3443a | |
| When encountering a vehicle with paint damage, refer to the "Mazda Pocket Paint Guide" to determine cause, prevention, remedy, and warranty coverage (if applicable). Copies of the Mazda Pocket Paint Guide are available for order on Mazda e- | |
| Bulletin Number: 09-019-18-3450 | |
| This service bulletin provides information regarding the proper use of the driver's floor mat to avoid any potential interference with the foot pedals. The following are possible causes of floor mat interference, which can be avoided with p | |
| Bulletin Number: 0902604 | |
| SPEEDOMETER REPLACEMENT PROCEDURE. *TT | |
| Bulletin Number: 09-027-14-2935 | |
| THIS SERVICE BULLETIN PROVIDES INFORMATION REGARDING THE PROPER USE OF THE DRIVERS FLOOR MAT TO AVOID ANY POTENTIAL INTERFERENCE WITH THE FOOT PEDALS. THE FOLLOWING ARE POSSIBLE CAUSES OF FLOOR MAT INTERFERENCE, WHICH CAN BE AVOIDED WITH P | |
| Bulletin Number: 09-034-14-2956 | |
| IN ACCORDANCE WITH FEDERAL REGULATIONS, FOLLOW THE PROCEDURE LISTED BELOW WHEN REPLACING A SPEEDOMETER.NOTE:MAZDA VEHICLES ARE MANUFACTURED WITH TAMPER-PROOF SPEEDOMETERS.WHEN A SPEEDOMETER IS REPLACED, THE NEW SPEEDOMETER WILL READ ZERO | |
| Bulletin Number: 09-034-18-3430 | |
| In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer's responsibility to co | |
| Bulletin Number: 09-034-18-3430a | |
| In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer's responsibility to co | |
| Bulletin Number: 09-035-17-3080 | |
| In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer?s responsibility to co | |
| Bulletin Number: 3005C | |
| THE TIGHTENING TORQUE OF THE SCREWS USED FOR MOUNTING THE INTAKE MANIFOLD SHUTTER VALVE MAY HAVE BEEN LOWER THAN THE SPECIFICATION, CAUSING ROUGH IDLING, NOISE AND/OR MALFUNCTION INDICATOR LAMP (MIL) ILLUMINATION TO ENGINE MISFIRING ADVERSE | |
| Bulletin Number: SB-09-005-13 | |
| MAZDA: ON SOME VEHICLES, TO AVOID POTENTIAL INTERFERENCE OF FOOT PLACED ON PEDALS, INFORMATION IS PROVIDED REGARDING PROPER USE, AND PLACEMENT, OF DRIVER'S FLOOR MAT. VARIOUS MODELS AND MODEL YEARS. *PE | |
| 2003 MAZDA PROTEGE 5 | |
| Bulletin Number: 00-003-19-3583 | |
| In support of the new MRT distribution, Mazda will ship to dealers a new Dual Purpose Diagnostic Leak Detector beginning March, 2019. Training videos will be posted to MGSS shortly and Workshop Manual procedures will be revised gradually. | |
| Bulletin Number: 07-002-13-2842 | |
| A MUSTY/MILDEW TYPE ODOR MAY COME FROM THE VENTS WHEN THE AIR CONDITIONING (A/C) SYSTEM IS OPERATING. IT IS MOST NOTICEABLE WHEN THE A/C IS FIRST TURNED ON. THIS ODOR IS THE RESULT OF MOLD GROWTH IN THE A/C EVAPORATOR/COOLING UNIT WHICH IS | |
| Bulletin Number: 07-002-18-3432 | |
| A musty/mildew type odor may come from the vents when the air conditioning (A/C) system is operating. It is most noticeable when the A/C is first turned ON. This odor is the result of mold growth in the A/Cevaporator/cooling unit which is c | |
| Bulletin Number: 07-002-19-3616 | |
| A musty/mildew type odor may come from the vents when the air conditioning (A/C) system is operating. It is most noticeable when the A/C is first turned ON. This odor is the result of mold growth in the A/C evaporator/cooling unit which is | |
| Bulletin Number: 09-009-19-3566 | |
| In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer's responsibility to co | |
| Bulletin Number: 09-034-14-2956 | |
| IN ACCORDANCE WITH FEDERAL REGULATIONS, FOLLOW THE PROCEDURE LISTED BELOW WHEN REPLACING A SPEEDOMETER.NOTE:MAZDA VEHICLES ARE MANUFACTURED WITH TAMPER-PROOF SPEEDOMETERS.WHEN A SPEEDOMETER IS REPLACED, THE NEW SPEEDOMETER WILL READ ZERO | |
| Bulletin Number: 09-034-18-3430 | |
| In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer's responsibility to co | |
| Bulletin Number: 09-034-18-3430a | |
| In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer's responsibility to co | |
| Bulletin Number: 09-035-17-3080 | |
| In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer?s responsibility to co | |
| 2003 MAZDA TRIBUTE | |
| Bulletin Number: 00-001-13-2748 | |
| MAZDA HAS DEVELOPED FACTORY RECOMMENDED SCHEDULED MAINTENANCE SERVICES THAT SUPPORT ALL MAJOR VEHICLE SYSTEMS. MAZDA RECOMMENDS DEALERS FOLLOW THE SCHEDULED MAINTENANCE TABLES AS CITED IN THE VEHICLE-SPECIFIC WORKSHOP MANUAL OR OWNERS MANU | |
| Bulletin Number: 00-001-13-2748A | |
| MAZDA HAS DEVELOPED FACTORY RECOMMENDED SCHEDULED MAINTENANCE SERVICES THAT SUPPORT ALL MAJOR VEHICLE SYSTEMS. MAZDA RECOMMENDS DEALERS FOLLOW THE SCHEDULED MAINTENANCE TABLES AS CITED IN THE VEHICLE-SPECIFIC WORKSHOP MANUAL OR OWNERS MANU | |
| Bulletin Number: 00-001-18-3446 | |
| Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle-specific workshop manual or owner's manu | |
| Bulletin Number: 00-001-18-3446a | |
| Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle- specific workshop manual or owner's man | |
| Bulletin Number: 00-001-19-3560 | |
| Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle- specific workshop manual or owner's man | |
| Bulletin Number: 00-002-14-2936 | |
| MAZDA NORTH AMERICAN OPERATIONS RECEIVED MANY REQUESTS FROM OUR DEALERS ASKING US TO APPROVE ADDITIONAL ON-CAR BRAKE LATHES AS AN OPTION FOR MNAO AUTHORIZED EQUIPMENT. DUE TO YOUR FEEDBACK AND AFTER EVALUATING A FEW ON-CAR BRAKE LATHES, WE | |
| Bulletin Number: 00-002-19-3561 | |
| Mazda North American Operations has approved an additional on-car brake lathe as an option for MNAO authorized equipment. The Pro-Cut On-Car Brake Lathe has been added to the MNAO authorized equipment program. NOTE: Accu-turn is still an ap | |
| Bulletin Number: 00-003-18-3480 | |
| Mazda North American Operations has approved an additional on-car brake lathe as an option for MNAOauthorized equipment. The Pro-Cut On-Car Brake Lathe has been added to the MNAO authorizedequipment program.NOTE: Accu-turn is still an appro | |
| Bulletin Number: 00-003-18-3480a | |
| Mazda North American Operations has approved an additional on-car brake lathe as an option for MNAO authorized equipment. The Pro-Cut On-Car Brake Lathe has been added to the MNAO authorized equipment program. NOTE: Accu-turn is still an ap | |
| Bulletin Number: 00-003-19-3583 | |
| In support of the new MRT distribution, Mazda will ship to dealers a new Dual Purpose Diagnostic Leak Detector beginning March, 2019. Training videos will be posted to MGSS shortly and Workshop Manual procedures will be revised gradually. | |
| Bulletin Number: 00-004/12 | |
| SUMMARY TO BE PROVIDED ON A FUTURE DATE. | |
| Bulletin Number: 00-004-12-2741 | |
| MAZDA HAS DEVELOPED FACTORY RECOMMENDED SCHEDULED MAINTENANCE SERVICES THAT SUPPORT ALL MAJOR VEHICLE SYSTEMS. MAZDA RECOMMENDS DEALERS FOLLOW THE SCHEDULED MAINTENANCE TABLES AS CITED IN THE VEHICLE-SPECIFIC WORKSHOP MANUAL OR OWNERS MANU | |
| Bulletin Number: 0004180 | |
| B29 AND LATER POWERTRAIN CONTROL MODULE (PCM) CALIBRATION UPDATE INFORMATION. REPAIR INFORMATION REVIEW1. *TT | |
| Bulletin Number: 00204 | |
| EVAPORATIVE EMMISSIONS AND RECIVER ADAPTERS. *EH | |
| Bulletin Number: 00307 | |
| AVAILABILITY OF NON-REQUIRED TOOLS. *KB | |
| Bulletin Number: 01-001-19-3551 | |
| This service bulletin provides testing and charging procedures in order to promote proper battery maintenance, to deliver new vehicles with fully charged batteries, and to reduce unnecessary battery replacement cost. For new vehicles in sto | |
| Bulletin Number: 0100204 | |
| CHECK FUEL CAP WARNING LIGHT OR MALFUNCTION INDICATOR LIGHT (MIL) ILLUMINATION WITH DTC P0455/ P0457. *MR | |
| Bulletin Number: 01-002-19-3552 | |
| The Mazda GR8-1291 is required for all warranty battery testing. If the Mazda GR8-1291 is not used, incorrect battery testing may result in unnecessary battery replacement. Use the following test procedures in this Service Bulletin to test | |
| Bulletin Number: 01-003-15-3014 | |
| USE THE FOLLOWING REPAIR PROCEDURE TO MINIMIZE THE NEED TO REPLACE THE CATALYST CONVERTER/EXHAUST PIPE WHEN REMOVING OXYGEN SENSORS AND/OR AIR FUEL RATIO SENSORS. | |
| Bulletin Number: 01-004-19-3558 | |
| On some vehicles, a sulfur smell or 'rotten egg' odor may be noticed coming from the exhaust system. The odor is usually noticed after a cold start, fast idle, extended periods of idling and full throttle acceleration. Sulfur smell is not a | |
| Bulletin Number: 01-008-18-3451 | |
| This service bulletin provides testing and charging procedures in order to promote proper battery maintenance, to deliver new vehicles with fully charged batteries, and to reduce unnecessary battery replacement cost. For new vehicles in sto | |
| Bulletin Number: 01-009-18-3452 | |
| The Mazda GR8-1291 is required for all warranty battery testing. If the Mazda GR8-1291 is not used, incorrect battery testing may result in unnecessary battery replacement. Use the following test procedures in this Service Bulletin to test | |
| Bulletin Number: 01012005 | |
| CONDENSATION IN FOG LAMPS, ESPECIALLY IN DAMP OR HUMID WEATHER. *TT | |
| Bulletin Number: 0101203 | |
| TAPPET (TICK) NOISE FROM ENGINE. *TT | |
| Bulletin Number: 0101402R | |
| INTERMITTENT ENGINE QUIT CONDITION. *TT | |
| Bulletin Number: 0101402R | |
| SOME VEHICLES EQUIPPED WITH A 3.0L DURATEC ENGINE MAY EXHIBIT AN INTERMITTENT ENGINE QUIT CONDITION. *TT | |
| Bulletin Number: 0101604 | |
| DIAGNOSTIC TIPS FOR TROUBLESHOOTING COIL-ON-PLUG MISFIRE CONCERNS. *TT THIS BULLETIN SUPERSEDES LAST ISSUED 5/3/04. *TT | |
| Bulletin Number: 01-016-18-3522 | |
| On some vehicles, a sulfur smell or 'rotten egg' odor may be noticed coming from the exhaust system. The odor is usually noticed after a cold start, fast idle, extended periods of idling and full throttle acceleration. Sulfur smell is not a | |
| Bulletin Number: 0102206 | |
| FRONT CRANKSHAFT BOLT SERVICE WARNING. *NJ | |
| Bulletin Number: 0102504 | |
| BATTERY TEST PROCEDURE REQUIREMENTS. *TT | |
| Bulletin Number: 0103003 | |
| A MALFUNCTION INDICATOR LAMP (MIL) WITH DIAGNOSTIC TROUBLE CODE (DTC) P0442, P0455, P0456, P0457 OR P1442 OR A CHECK FUEL CAP LIGHT ILLUMINATED WITH DTC P0457. VARIOUS MODELS INCLUDING THE 2005 TRIBUE AND 2004 B-SERIES. *TT | |
| Bulletin Number: 0103004 | |
| GENERATOR WIRING ROUTING. *TT | |
| Bulletin Number: 0104706 | |
| NO START, NO CRANK, OR MIL ILLUMINATION WITH ONE OR MORE DTC'S PRESENT. *KB | |
| Bulletin Number: 0200105 | |
| STEERING DRIFT / PULL - IMPROVED DIAGNOSTIC AND REPAIR PROCEDURE. *TT | |
| Bulletin Number: 02-001-13-2752 | |
| SOME CUSTOMERS MAY COMPLAIN OF SIGNS OF OIL ON THE STRUTS OR SHOCK ABSORBERS. IN MOST CASES THE OIL THAT IS PRESENT IS NORMAL, AND A RESULT OF THE OIL THAT REMAINS ON THE SHAFT DURING THE NORMAL SWEEPING PROCESS OF THE SHAFT SEAL. FOLLOW TH | |
| Bulletin Number: 02-001-19-3550 | |
| Some customers may complain of signs of oil on the struts or shock absorbers. In most cases the oil that is present is normal, and a result of the oil that remains on the shaft during the normal sweeping process of the shaft seal. Follow th | |
| Bulletin Number: 0200403 | |
| PREMATURE WEAR AND/OR NOISE FROM THE TIE ROD END ESPECIALLY FROM THE OUTER TIE ROD. *TT | |
| Bulletin Number: 02-004-13-2770 | |
| SOME CUSTOMERS MAY COMPLAIN THAT THE STEERING WHEEL IS OFF CENTER MORE THAN 3┬░ EVEN WHEN DRIVING STRAIGHT ON A FLAT ROAD. | |
| Bulletin Number: 02-004-13-2770A | |
| SOME CUSTOMERS MAY COMPLAIN THAT THE STEERING WHEEL IS OFF CENTER MORE THAN 3┬░ EVEN WHEN DRIVING STRAIGHT ON A FLAT ROAD. | |
| Bulletin Number: 02-004-13-2770B | |
| SOME CUSTOMERS MAY COMPLAIN THAT THE STEERING WHEEL IS OFF CENTER MORE THAN 3┬░ EVEN WHEN DRIVING STRAIGHT ON A FLAT ROAD. | |
| Bulletin Number: 02-004-14 | |
| SUMMARY TO BE PROVIDED ON A FUTURE DATE. | |
| Bulletin Number: 02-004-19-3574 | |
| Some customers may complain that the steering wheel is off center more than 3┬░ even when driving straight on a flat road. | |
| Bulletin Number: 02-006-18-3449 | |
| Some customers may complain of signs of oil on the struts or shock absorbers. In most cases the oil that is present is normal, and a result of the oil that remains on the shaft during the normal sweeping process of the shaft seal. Follow th | |
| Bulletin Number: 02-009-16-3155 | |
| SOME CUSTOMERS MAY COMPLAIN THAT THE STEERING WHEEL IS OFF CENTER MORE THAN 3┬░ EVEN WHEN DRIVING STRAIGHT ON A FLAT ROAD. | |
| Bulletin Number: 02-010-18-3477 | |
| Some customers may complain that the steering wheel is off center more than 3┬░ even when driving straight on a flat road. | |
| Bulletin Number: 02062004 | |
| SELF-TEST PROCEDURE FOR SPEED CONTROL SYSTEM. *MR | |
| Bulletin Number: 0400204 | |
| EXCESSIVE FRONT BRAKE ROTOR WEAR AND/OR BRAKE DUST ACCUMULATION ON THE FRONT WHEELS. *TT | |
| Bulletin Number: 0400502 | |
| INADVERTENT DISABLING OF BRAKE SHIFT INTERLOCK. *TT | |
| Bulletin Number: 0400804 | |
| WHEEL SPEED SENSOR REMOVAL TIP. *TT | |
| Bulletin Number: 0415 | |
| WINDSHIELD GLASS REPLACEMENT. PARTS FLASH. *TT | |
| Bulletin Number: 05-001-16-3128 | |
| ALWAYS BE SURE TO USE THE CORRECT AUTOMATIC TRANSMISSION FLUID WHEN REPLACING ATF. USING THE WRONG ATF MAY CAUSE SHIFT QUALITY COMPLAINTS OR MAY EVEN DAMAGE THE TRANSMISSION.NOTE: ATF M-V (TYPE M5) IS NOT THE SAME FLUID AS MERCON®V OR MERC | |
| Bulletin Number: 05-001-18-3453 | |
| Always be sure to use the correct automatic transmission fluid when replacing ATF. Using the wrong ATF may cause shift quality complaints or may even damage the transmission. NOTE: ATF M-V (TYPE M5) IS NOT THE SAME FLUID AS MERCON®V OR MERC | |
| Bulletin Number: 05-002-13-2777 | |
| ALWAYS BE SURE TO USE THE CORRECT AUTOMATIC TRANSMISSION FLUID WHEN REPLACING ATF. USING THE WRONG ATF MAY CAUSE SHIFT QUALITY COMPLAINTS OR MAY EVEN DAMAGE THE TRANSMISSION.NOTE:ATF M-V (TYPE M5) IS NOT THE SAME FLUID AS MERCON®V OR MERCO | |
| Bulletin Number: 05-002-13-2777A | |
| ALWAYS BE SURE TO USE THE CORRECT AUTOMATIC TRANSMISSION FLUID WHEN REPLACING ATF. USING THE WRONG ATF MAY CAUSE SHIFT QUALITY COMPLAINTS OR MAY EVEN DAMAGE THE TRANSMISSION.NOTE:ATF M-V (TYPE M5) IS NOT THE SAME FLUID AS MERCON®V OR MERCO | |
| Bulletin Number: 0500504 | |
| AUTOMATIC TRANSAXLE (A/T) INDICATOR LAMP ON (DIAGNOSTIC TROUBLE CODE P1783 AND/OR P0733) OR COLD CLIMATE SHIFT / ENGAGEMENT CONCERNS. UPDATE. *TT | |
| Bulletin Number: 0500706 | |
| MERCON ATF IS BEING REPLACED BY MERCON V AS A SERVICE FLUID. *KB | |
| Bulletin Number: 0529 | |
| FRONT OUTER DOOR HANDLE REINFORCEMENT HAS BEEN REDESIGNED. *TS | |
| Bulletin Number: 0530 | |
| ELECTRIC COOLING FAN ASSEMBLY. *TS | |
| Bulletin Number: 0600203 | |
| PREMATURE WEAR AND/OR NOISE FROM THE TIE ROD END, ESPECIALLY FROM THE OUTER TIE ROD. *TT | |
| Bulletin Number: 06012004 | |
| FUEL TANK GAUGE. *JB | |
| Bulletin Number: 06012004 | |
| METER SET SERVICE TIP. *JB | |
| Bulletin Number: 06012004 | |
| POP/SNAP NOISE WHILE DRIVING. *JB | |
| Bulletin Number: 06012004 | |
| PROGRAMMABLE MODULE INSTALLATION. ( 2004 MAZDA B SERIES) *JB | |
| Bulletin Number: 0800104 | |
| PRETENSIONER DIAGNOSTIC TROUBLE CODES (DTCS) B1877 OR B1881. *MR | |
| Bulletin Number: 0800105 | |
| PRETENSIONER DIAGNOSTIC TROUBLE CODES (DTCS) B1877, B1881. ORIGINAL NOT RECEIVED. *TT | |
| Bulletin Number: 0800205 | |
| AIR BAG WARNING LAMP ILLUMINATING INTERMITTENTLY WITH DIAGNOSTIC TROUBLE CODES B1994. *TT | |
| Bulletin Number: 0800306 | |
| NON GENUINE ACCESSORIES AFFECT AIR BAG OPERATION. *KB | |
| Bulletin Number: 0800405 | |
| SAFETY BELT RETRACTS TOO SLOWLY. MAZDA INCLUDING 2006 B-SERIES TRUCKS. *SC | |
| Bulletin Number: 08062004 | |
| DEALER NOTICE - SERVICE BULLETIN RELEASE 8/6/2004. *TT | |
| Bulletin Number: 08112004 | |
| DEALER NOTICE - SERVICE BULLETIN RELEASE 8/11/2004. *TT | |
| Bulletin Number: 0900104 | |
| PORT OR DEALER INSTALLED AUTO-DIMMING (ELECTRO-CHROMIC) MIRROR, WITH ELECTRONIC COMPASS, AMBIENT TEMPERATURE. *MR | |
| Bulletin Number: 09-002-19-3554 | |
| This service bulletin provides information regarding the proper use of the driver's floor mat to avoid anypotential interference with the foot pedals. The following are possible causes of floor mat interference,which can be avoided with pro | |
| Bulletin Number: 0900403 | |
| REAR WINDOW DEFROSTER GRID LINE REPAIR PROCEDURE. *TT | |
| Bulletin Number: 09-005-13-2781 | |
| THIS SERVICE BULLETIN PROVIDES INFORMATION REGARDING THE PROPER USE OF THE DRIVERS FLOOR MAT TO AVOID ANY POTEN-TIAL INTERFERENCE WITH THE FOOT PEDALS. THE FOLLOWING ARE POSSIBLE CAUSES OF FLOOR MAT INTERFERENCE, WHICH CAN BE AVOIDED WITH | |
| Bulletin Number: 09-005-19-3562 | |
| When encountering a vehicle with paint damage, refer to the "Mazda Pocket Paint Guide" to determine cause, prevention, remedy, and warranty coverage (if applicable). Copies of the Mazda Pocket Paint Guide are available for order on Mazda e- | |
| Bulletin Number: 09-009-19-3566 | |
| In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer's responsibility to co | |
| Bulletin Number: 0901202 | |
| PASSIVE ANTI-THEFT (PATS) DIAGNOSTIC SERVICE TIPS. *TT | |
| Bulletin Number: 09-014-18-3443 | |
| When encountering a vehicle with paint damage, refer to the "Mazda Pocket Paint Guide" to determine cause, prevention, remedy, and warranty coverage (if applicable). | |
| Bulletin Number: 09-014-18-3443a | |
| When encountering a vehicle with paint damage, refer to the "Mazda Pocket Paint Guide" to determine cause, prevention, remedy, and warranty coverage (if applicable). Copies of the Mazda Pocket Paint Guide are available for order on Mazda e- | |
| Bulletin Number: 0901703 | |
| ELECTRICAL - WIRING - SOLDERING AND CRIMPING REPAIRS - SERVICE TIP. *TT | |
| Bulletin Number: 09-019-18-3450 | |
| This service bulletin provides information regarding the proper use of the driver's floor mat to avoid any potential interference with the foot pedals. The following are possible causes of floor mat interference, which can be avoided with p | |
| Bulletin Number: 0902004 | |
| EXTERIOR MIRROR GLASS AND MOTOR REPLACEMENT GUIDELINES. *MJ | |
| Bulletin Number: 0902604 | |
| SPEEDOMETER REPLACEMENT PROCEDURE. *TT | |
| Bulletin Number: 09-027-14-2935 | |
| THIS SERVICE BULLETIN PROVIDES INFORMATION REGARDING THE PROPER USE OF THE DRIVERS FLOOR MAT TO AVOID ANY POTENTIAL INTERFERENCE WITH THE FOOT PEDALS. THE FOLLOWING ARE POSSIBLE CAUSES OF FLOOR MAT INTERFERENCE, WHICH CAN BE AVOIDED WITH P | |
| Bulletin Number: 09-029-18-3497 | |
| In the event that all vehicle keys are lost and the vehicle key code is not available on the Vehicle Retail Data Inquiry system, replacement keys may only be acquired by obtaining the key code using the Repair Procedure below. Mazda recomme | |
| Bulletin Number: 09-034-14-2956 | |
| IN ACCORDANCE WITH FEDERAL REGULATIONS, FOLLOW THE PROCEDURE LISTED BELOW WHEN REPLACING A SPEEDOMETER.NOTE:MAZDA VEHICLES ARE MANUFACTURED WITH TAMPER-PROOF SPEEDOMETERS.WHEN A SPEEDOMETER IS REPLACED, THE NEW SPEEDOMETER WILL READ ZERO | |
| Bulletin Number: 09-034-18-3430 | |
| In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer's responsibility to co | |
| Bulletin Number: 09-034-18-3430a | |
| In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer's responsibility to co | |
| Bulletin Number: 09-035-17-3080 | |
| In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer?s responsibility to co | |
| Bulletin Number: 13-07R | |
| SUMMARY TO BE PROVIDED ON A FUTURE DATE. | |
| Bulletin Number: MT-012-18 | |
| If a vehicle has body vibration or steering wheel shimmy while driving and the root cause is determined to be tire balance, re-balance the tires using a Hunter GSP9700 or equivalent balance machine. If your dealer does not have a GSP9700 or | |
| Bulletin Number: RF0315 | |
| ORDER PROCESS FOR TRIBUTE TRAILER HITCH. *TT | |
| Bulletin Number: RF-13-07 | |
| SUMMARY TO BE PROVIDED ON A FUTURE DATE. | |
| Bulletin Number: SA-061-17 | |
| In an effort to achieve a higher level of Customer Experience and retain the value of Mazda's vehicles, MNAO Warranty Operations is© 2017 Mazda North American Operations, U.S.A. allowing all Mazda dealers to utilize a third party, SPECMO En | |
| Bulletin Number: SB-09-005-13 | |
| MAZDA: ON SOME VEHICLES, TO AVOID POTENTIAL INTERFERENCE OF FOOT PLACED ON PEDALS, INFORMATION IS PROVIDED REGARDING PROPER USE, AND PLACEMENT, OF DRIVER'S FLOOR MAT. VARIOUS MODELS AND MODEL YEARS. *PE | |
Recalls for 2003 Mazda
| 2003 MAZDA B-SERIES TRUCK | |
|---|---|
| NHTSA Campaign ID: | VEHICLE SPEED CONTROL:CRUISE CONTROL |
| Manufacturer: | MAZDA MOTOR CORP |
| Manufacture Dates: | 08/02/2002 - 12/05/2002 |
| Potential Units Affected: | 39600 |
Defect Description:MAZDA IS RECALLING MODEL YEAR 1995 THROUGH 1997 AND MODEL YEAR 2001 THROUGH 2003 TRUCKS EQUIPPED WITH TEXAS INSTRUMENTS SPEED CONTROL DEACTIVATION SWITCH (SCDS) AND/OR ANTI-LOCK BRAKE SYSTEM (ABS) AND MANUFACTURED ON OR BEFORE DECEMBER 5, 2002. A COMPONENT OF THE CRUISE CONTROL DEACTIVATION SWITCH MAY DETERIORATE OVER TIME AND DEVELOP A LEAK. THIS OCCURRENCE COULD CAUSE THE SWITCH TO OVERHEAT, SMOKE OR BURN WHICH COULD RESULT IN AN UNDER HOOD FIRE. Consequence:A VEHICLE FIRE COULD OCCUR WITH OR WITHOUT THE ENGINE RUNNING. Action:MAZDA WILL NOTIFY OWNERS THAT DEALERS WILL INSTALL A UNIVERSAL FUSED JUMPER HARNESS ON THE CRUISE CONTROL DEACTIVATION SWITCH FREE OF CHARGE. THE SAFETY RECALL BEGAN ON DECEMBER 11, 2009. OWNERS MAY CONTACT MAZDA AT 1-800-222-5500 OPTION #6. | |
| 2003 MAZDA MAZDA6 | |
|---|---|
| NHTSA Campaign ID: | AIR BAGS:PASSENGER SIDE FRONTAL |
| Manufacturer: | Mazda North American Operations |
| Manufacture Dates: | 05/29/2002 - 05/05/2008 |
| Potential Units Affected: | 308591 |
Defect Description:Mazda North America Operations (Mazda) is recalling certain 2003-2008 Mazda6, 2006-2007 Mazdaspeed6 and 2004 MPV vehicles nationwide. Mazda is also recalling 2005-2006 MPV vehicles in Alabama, Arizona, Arkansas, California, Delaware, the District of Columbia, Florida, Georgia, Hawaii, Illinois, Indiana, Kansas, Kentucky, Louisiana, Maryland, Mississippi, Missouri, Nebraska, Nevada, New Jersey, New Mexico, North Carolina, Ohio, Oklahoma, Pennsylvania, South Carolina, Tennessee, Texas, Virginia, West Virginia, Puerto Rico, American Samoa, Guam, the Northern Mariana Islands (Saipan), and the U.S. Virgin Islands. On July 9, 2019 this recall was expanded to include certain 2004-2011 RX-8 vehicles that were previously recalled under 16V-354 but have not yet been repaired. These vehicles are equipped with certain air bag inflators assembled as part of the passenger frontal air bag modules, and used as original equipment or replacement equipment. In the event of a crash necessitating deployment of the passenger frontal air bag, these passenger air bag inflators may explode due to propellant degradation occurring after long-term exposure to absolute humidity and temperature cycling. Consequence:An inflator explosion may result in sharp metal fragments striking the driver or other occupants resulting in serious injury or death. Action:Mazda will notify owners, and dealers will replace the front passenger air bag inflator with an alternate inflator, free of charge. The recall began July 6, 2018. Mailing to the affected RX-8 owners began July 6, 2019. Owners may contact Mazda customer service at 1-800-222-5500, option 4. Mazda's number for this recall is 2618F. Note: With the addition of the RX-8 vehicles, this recall fully supersedes recall 16V354. | |
| 2003 MAZDA MAZDA6 | |
|---|---|
| NHTSA Campaign ID: | EXTERIOR LIGHTING:FOG LIGHTS |
| Manufacturer: | MAZDA NORTH AMERICAN OPERATIONS |
| Manufacture Dates: | 10/02/2002 - 05/27/2003 |
| Potential Units Affected: | 64000 |
Defect Description:ON CERTAIN MINI VANS AND PASSENGER VEHICLES, THE SOCKET HOLDER IN THE FOG LIGHTS IS INSTALLED IN THE LAMP CASING USING PRESSURE. DURING OPERATION OF THE FOG LIGHT, THE HEAT FROM THE BULB CAN EXPAND THE SOCKET HOLDER. THE EXPANSION CAN FORCE THE SOCKET HOLDER REARWARD. AFTER REPEATEDLY BEING SUBJECT TO THIS EXPANSION, IF THE FOG LIGHT IS ALSO SUBJECTED TO VIBRATION DURING VEHICLE OPERATION, THE SOCKET HOLDER WITH THE BULB HOLDER AND THE WIRING HARNESS MAY SEPARATE FROM THE FOG LIGHT CASING. Consequence:SHOULD THIS OCCUR, THE BULB SOCKET AND THE HARNESS CAN DROP INSIDE THE BUMPER AND POSSIBLY BUT RARELY, THE HEAT GENERATED BY THE BULB CAN CAUSE THE BUMPER TO BURN. Action:DEALERS WILL INSTALL A SPRING TO PREVENT THE SOCKET HOLDER FROM SEPARATING FROM THE LAMP CASE. OWNER NOTIFICATION BEGAN ON JULY 14, 2003. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT MAZDA AT 1-800-222-5500. | |
| 2003 MAZDA MAZDA6 | |
|---|---|
| NHTSA Campaign ID: | PARKING BRAKE:INDICATOR LIGHT |
| Manufacturer: | MAZDA NORTH AMERICAN OPERATIONS |
| Manufacture Dates: | 10/02/2002 - 05/27/2003 |
| Potential Units Affected: | 45600 |
Defect Description:CERTAIN PASSENGER VEHICLES FAIL TO COMPLY WITH REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 135, "PASSENGER CAR BRAKE SYSTEMS." DURING PRODUCTION, THE FLOAT IN THE FLUID LEVEL SENSOR IN THE BRAKE RESERVOIR CAN BE FORCED OFF OF THE GUIDE RAIL DURING THE FILLING OF THE MASTER CYLINDER. Consequence:SHOULD THIS OCCUR, IT IS POSSIBLE THAT THE FLOAT WILL NOT RETURN TO THE GUIDE RAIL AND THE BRAKE FLUID LEVEL WARNING INDICATOR MAY NOT FUNCTION. Action:MAZDA HAS NOT YET PROVIDED A REMEDY FOR THIS CAMPAIGN. OWNER NOTIFICATION BEGAN JULY 14, 2003. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT MAZDA AT 1-800-222-5500. | |
| 2003 MAZDA MAZDA6 | |
|---|---|
| NHTSA Campaign ID: | FUEL SYSTEM, GASOLINE:DELIVERY |
| Manufacturer: | MAZDA NORTH AMERICAN OPERATIONS |
| Manufacture Dates: | 10/02/2002 - 08/06/2003 |
| Potential Units Affected: | 56700 |
Defect Description:ON CERTAIN PASSENGER VEHICLES, THE FUEL SENDER UNIT (FSU) MAY HAVE BEEN IMPROPERLY INSTALLED IN THE FUEL TANK, PRODUCING AN INADEQUATE SEAL, AND FUEL MAY LEAK. Consequence:A FIRE COULD OCCUR IN THE PRESENCE OF AN IGNITION SOURCE. Action:DEALERS WILL INSPECT THE TOP OF THE FUEL TANK, AND IF NECESSARY, REPAIR OR REPLACE IT. OWNER NOTIFICATION BEGAN FEBRUARY 9, 2004. OWNERS SHOULD CONTACT MAZDA AT 1-800-222-5500. | |
| 2003 MAZDA MAZDA6 | |
|---|---|
| NHTSA Campaign ID: | AIR BAGS:FRONTAL:DRIVER SIDE INFLATOR MODULE |
| Manufacturer: | Mazda North American Operations |
| Manufacture Dates: | 05/29/2002 - 05/05/2008 |
| Potential Units Affected: | 308992 |
Defect Description:Mazda North American Operations (Mazda) is recalling certain model year 2003-2008 Mazda6, 2004-2008 RX-8, and 2006-2007 Mazdaspeed6 vehicles. The affected vehicles are equipped with a dual-stage driver frontal air bag that may be susceptible to moisture intrusion and other factors, including manufacturing variability that, over time, could cause the inflator to rupture. Consequence:In the event of a crash necessitating deployment of the driver's frontal air bag, the inflator could rupture with metal fragments striking the driver or other occupants resulting in serious injury or death. Action:Mazda will notify owners, and dealers will replace the driver's frontal air bag inflator with an alternate inflator, free of charge. The recall began on September 12, 2017. Owners may contact Mazda customer service at 1-800-222-5500. Mazda's number for this recall is 1417G. Note: This recall supersedes recall 15V-382. | |
| 2003 MAZDA MIATA | |
|---|---|
| NHTSA Campaign ID: | EXTERIOR LIGHTING:FOG LIGHTS |
| Manufacturer: | MAZDA NORTH AMERICAN OPERATIONS |
| Manufacture Dates: | 07/10/2000 - 02/28/2003 |
| Potential Units Affected: | 64000 |
Defect Description:ON CERTAIN MINI VANS AND PASSENGER VEHICLES, THE SOCKET HOLDER IN THE FOG LIGHTS IS INSTALLED IN THE LAMP CASING USING PRESSURE. DURING OPERATION OF THE FOG LIGHT, THE HEAT FROM THE BULB CAN EXPAND THE SOCKET HOLDER. THE EXPANSION CAN FORCE THE SOCKET HOLDER REARWARD. AFTER REPEATEDLY BEING SUBJECT TO THIS EXPANSION, IF THE FOG LIGHT IS ALSO SUBJECTED TO VIBRATION DURING VEHICLE OPERATION, THE SOCKET HOLDER WITH THE BULB HOLDER AND THE WIRING HARNESS MAY SEPARATE FROM THE FOG LIGHT CASING. Consequence:SHOULD THIS OCCUR, THE BULB SOCKET AND THE HARNESS CAN DROP INSIDE THE BUMPER AND POSSIBLY BUT RARELY, THE HEAT GENERATED BY THE BULB CAN CAUSE THE BUMPER TO BURN. Action:DEALERS WILL INSTALL A SPRING TO PREVENT THE SOCKET HOLDER FROM SEPARATING FROM THE LAMP CASE. OWNER NOTIFICATION BEGAN ON JULY 14, 2003. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT MAZDA AT 1-800-222-5500. | |
| 2003 MAZDA MPV | |
|---|---|
| NHTSA Campaign ID: | EXTERIOR LIGHTING:FOG LIGHTS |
| Manufacturer: | MAZDA NORTH AMERICAN OPERATIONS |
| Manufacture Dates: | 11/26/2001 - 02/28/2003 |
| Potential Units Affected: | 64000 |
Defect Description:ON CERTAIN MINI VANS AND PASSENGER VEHICLES, THE SOCKET HOLDER IN THE FOG LIGHTS IS INSTALLED IN THE LAMP CASING USING PRESSURE. DURING OPERATION OF THE FOG LIGHT, THE HEAT FROM THE BULB CAN EXPAND THE SOCKET HOLDER. THE EXPANSION CAN FORCE THE SOCKET HOLDER REARWARD. AFTER REPEATEDLY BEING SUBJECT TO THIS EXPANSION, IF THE FOG LIGHT IS ALSO SUBJECTED TO VIBRATION DURING VEHICLE OPERATION, THE SOCKET HOLDER WITH THE BULB HOLDER AND THE WIRING HARNESS MAY SEPARATE FROM THE FOG LIGHT CASING. Consequence:SHOULD THIS OCCUR, THE BULB SOCKET AND THE HARNESS CAN DROP INSIDE THE BUMPER AND POSSIBLY BUT RARELY, THE HEAT GENERATED BY THE BULB CAN CAUSE THE BUMPER TO BURN. Action:DEALERS WILL INSTALL A SPRING TO PREVENT THE SOCKET HOLDER FROM SEPARATING FROM THE LAMP CASE. OWNER NOTIFICATION BEGAN ON JULY 14, 2003. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT MAZDA AT 1-800-222-5500. | |
| 2003 MAZDA MPV | |
|---|---|
| NHTSA Campaign ID: | EQUIPMENT:OTHER:LABELS |
| Manufacturer: | MAZDA NORTH AMERICAN OPERATIONS |
| Manufacture Dates: | 11/26/2001 - 06/30/2003 |
| Potential Units Affected: | 350 |
Defect Description:CERTAIN MINIVANS FAIL TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 208, "OCCUPANT CRASH PROTECTION." SOME OF THESE VEHICLES WERE PRODUCED WITH AIR BAG WARNING LABELS INTENDED FOR THE CANADIAN MARKET. THUS, THE LABELS CONTAIN WARNINGS IN BOTH ENGLISH AND FRENCH. AS A RESULT, THE AREA OF THE ENGLISH WARNING IS ONLY 16 SQUARE CENTIMETERS, AS OPPOSED TO THE 30 SQUARE CENTIMETERS REQUIRED BY THE STANDARD. Consequence:Action:OWNERS WILL BE PROVIDED WITH AIR BAG CAUTION LABELS AND INSTALLATION INSTRUCTIONS WHICH WERE MAILED ON JULY 22, 2004. OWNERS SHOULD CONTACT MAZDA AT 1-800-222-5500. | |
| 2003 MAZDA MPV | |
|---|---|
| NHTSA Campaign ID: | EQUIPMENT:OTHER:LABELS |
| Manufacturer: | MAZDA NORTH AMERICAN OPERATIONS |
| Manufacture Dates: | 08/20/2003 - 05/06/2004 |
| Potential Units Affected: | 20000 |
Defect Description:THE TIRE INFLATION PRESSURE INDICATED ON THE VEHICLE CERTIFICATION LABEL IS NOT CORRECT. THE LABELS SHOW THE MAXIMUM TIRE PRESSURE AS 240 KPA/32 PSI WHEN IT SHOULD BE SHOWN AS 240 KPA/35 PSI. AS A RESULT OF THIS ERROR, THE LOAD RATIOS FOR THE 205/65R15 94H AND THE 215/60R16 95H TIRES EXCEED THE LEVELS PERMITTED BY FMVSS 120. Consequence:IF THE TIRE IS OPERATED IN AN UNDER-INFLATED CONDITION, THE LOAD CARRYING CAPACITY OF THE VEHICLE MAY BE COMPROMISED, INCREASING THE RISK OF A CRASH. Action:OWNERS WILL BE PROVIDED WITH A CORRECTED LABEL THAT THEY CAN APPLY TO THEIR VEHICLE, OR THEY CAN HAVE A DEALER INSTALL THE LABEL, IF DESIRED. THE RECALL BEGAN ON JULY 16, 2004. OWNERS SHOULD CONTACT MAZDA AT 1-800-222-5500, OPTION #4. | |
| 2003 MAZDA MPV | |
|---|---|
| NHTSA Campaign ID: | EXTERIOR LIGHTING:FOG LIGHTS |
| Manufacturer: | MAZDA NORTH AMERICAN OPERATIONS |
| Manufacture Dates: | 11/12/2001 - 01/21/2003 |
| Potential Units Affected: | 5400 |
Defect Description:ON CERTAIN MINI VANS EQUIPPED WITH FRONT FOG LIGHTS,THE FOG LIGHT BULB SOCKET MAY HAVE BEEN INSTALLED IMPROPERLY. Consequence:IF THE VEHICLE CONTINUES TO BE USED WITH THIS CONDITION, THE BULB SOCKET AND THE WIRING HARNESS MAY SEPARATE FROM THE FOG LIGHT HOUSING IF EXPOSED TO SHOCK AND/OR VIBRATION AND DROP INSIDE THE BUMPER. SHOULD THIS OCCUR, THE OPERATION OF THE FOG LIGHT MAY THEN CAUSE THE BUMPER TO BURN. Action:DEALERS WILL INSPECT THE INSTALLATION CONDITION OF THE FOG LIGHT BULB ASSEMBLY, AND REPAIR IT WHEN NECESSARY. OWNER NOTIFICATION BEGAN MARCH 31, 2003. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT MAZDA AT 1-800-222-5500. | |
| 2003 MAZDA TRIBUTE | |
|---|---|
| NHTSA Campaign ID: | ENGINE AND ENGINE COOLING |
| Manufacturer: | MAZDA NORTH AMERICAN OPERATIONS |
| Manufacture Dates: | - |
| Potential Units Affected: | 217500 |
Defect Description:Mazda is recalling certain model year 2001 through 2006, and 2008, Tribute vehicles equipped with 3.0L V6 engines and speed control. Inadequate clearance between the engine cover and the speed control cable connector could result in a stuck throttle when the accelerator pedal is fully or almost-fully depressed. This risk exists regardless of whether or not speed control (cruise control) is used. Consequence:A stuck throttle may result in very high vehicle speeds and make it difficult to stop or slow the vehicle, which could cause a crash, serious injury or death. Action:Mazda will notify owners, and dealers will repair the vehicles by increasing the engine cover clearance, free of charge. Remedy parts are now available. The safety recall began on September 13, 2012. Owners may contact Mazda Customer Assistance Center at 1-800-222-5500, option #6. | |
| 2003 MAZDA TRIBUTE | |
|---|---|
| NHTSA Campaign ID: | LATCHES/LOCKS/LINKAGES:HATCHBACK/LIFTGATE:LOCK |
| Manufacturer: | MAZDA NORTH AMERICAN OPERATIONS |
| Manufacture Dates: | - |
| Potential Units Affected: | 49800 |
Defect Description:CERTAIN 2004-2005 SPORT UTILITY VEHICLES AND CERTAIN 2001-2003 SPORT UTILITY VEHICLE HAVING REAR LIFTGATE COMPONENTS SERVICED WITH 2004 EQUIVALENT COMPONENTS FAIL TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 206, 'DOOR LOCKS AND DOOR RETENTION COMPONENTS.' THE REAR LIFTGATE LATCHING SYSTEM DOES NOT MEET THE INERTIA LOAD REQUIREMENT IN ONE DIRECTION. Consequence:IF THE LIFTGATE IS LEFT UNLOCKED, THERE IS THE POTENTIAL THAT IT MAY OPEN DURING A CRASH. Action:DEALERS WILL REPLACE THE REAR LIFTGATE LATCH RELEASE ROD, THE RELEASE ROD ATTACHMENT CLIP AND THE DOOR HANDLE RETURN SPRING. THE RECALL BEGAN ON MARCH 31, 2005. OWNERS SHOULD CONTACT MAZDA AT 1-800-222-5500. | |
| 2003 MAZDA TRIBUTE | |
|---|---|
| NHTSA Campaign ID: | VEHICLE SPEED CONTROL:CABLES |
| Manufacturer: | MAZDA NORTH AMERICAN OPERATIONS |
| Manufacture Dates: | 05/30/2001 - 12/19/2003 |
| Potential Units Affected: | 121000 |
Defect Description:ON CERTAIN SPORT UTILITY VEHICLES, THE ACCELERATOR CABLE MAY PREVENT THE THROTTLE FROM RETURNING TO THE IDLE POSITION. Consequence:AN UNEXPECTED INCREASE IN ENGINE IDLE SPEED MAY INCREASE STOPPING DISTANCE AND MAY RESULT IN A VEHICLE CRASH. Action:DEALERS WILL REPLACE THE ACCELERATOR CABLE. THE RECALL BEGAN ON JANUARY 28, 2005. OWNERS SHOULD CONTACT MAZDA AT 1-800-222-5500, OPTION #4. | |
| 2003 MAZDA TRIBUTE | |
|---|---|
| NHTSA Campaign ID: | VEHICLE SPEED CONTROL:CABLES |
| Manufacturer: | MAZDA NORTH AMERICAN OPERATIONS |
| Manufacture Dates: | - |
| Potential Units Affected: | 217500 |
Defect Description:Mazda is recalling certain model year 2001 through 2006, and 2008, Tribute vehicles equipped with 3.0L V6 engines and speed control. Inadequate clearance between the engine cover and the speed control cable connector could result in a stuck throttle when the accelerator pedal is fully or almost-fully depressed. This risk exists regardless of whether or not speed control (cruise control) is used. Consequence:A stuck throttle may result in very high vehicle speeds and make it difficult to stop or slow the vehicle, which could cause a crash, serious injury or death. Action:Mazda will notify owners, and dealers will repair the vehicles by increasing the engine cover clearance, free of charge. Remedy parts are now available. The safety recall began on September 13, 2012. Owners may contact Mazda Customer Assistance Center at 1-800-222-5500, option #6. | |
| 2003 MAZDA TRIBUTE | |
|---|---|
| NHTSA Campaign ID: | STRUCTURE:FRAME AND MEMBERS |
| Manufacturer: | Mazda North American Operations |
| Manufacture Dates: | 05/22/2000 - 12/19/2003 |
| Potential Units Affected: | 109000 |
Defect Description:Mazda North American Operations (Mazda) is recalling certain model year 2001-2004 Tribute vehicles manufactured May 22, 2000, through December 19, 2003, originally sold, or currently registered in, Connecticut, Delaware, Illinois, Indiana, Iowa, Maine, Maryland, Massachusetts, Michigan, Minnesota, Missouri, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont, West Virginia, Wisconsin and the District of Columbia. These vehicles may experience excessive corrosion at the forward attachment of the lower control arm. Consequence:A separation of the lower control arm can result in a significant loss of steering control, increasing the risk of a crash. Action:Mazda will notify owners, and dealers will install a newly designed reinforcement cross-brace, free of charge. The recall began on May 29, 2014. Owners may contact Mazda at 1-800-222-5500. Mazda's number for this recall is 7514D. | |
| 2003 MAZDA TRIBUTE | |
|---|---|
| NHTSA Campaign ID: | POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM, PCM) |
| Manufacturer: | MAZDA NORTH AMERICAN OPERATIONS |
| Manufacture Dates: | 04/17/2000 - 09/11/2002 |
| Potential Units Affected: | 106000 |
Defect Description:ON CERTAIN SPORT UTILITY VEHICLES EQUIPPED WITH 3.0L V6 DURATEC ENGINES , DURING DECELERATION, THE ENGINE CAN STALL. Consequence:SHOULD THE ENGINE STALL, A VEHICLE CRASH COULD OCCUR. Action:DEALERS WILL REPROGRAM THE POWER CONTROL MODULE (PCM) WITH THE APPROPRIATE CALIBRATION. THE RECALL BEGAN ON MAY 3, 2004. OWNERS SHOULD CONTACT MAZDA AT 1-800-222-5500. | |
| 2003 MAZDA TRIBUTE | |
|---|---|
| NHTSA Campaign ID: | SERVICE BRAKES, HYDRAULIC:ANTILOCK:CONTROL UNIT/MODULE |
| Manufacturer: | MAZDA MOTOR CORP |
| Manufacture Dates: | 04/17/2000 - 12/19/2003 |
| Potential Units Affected: | 95300 |
Defect Description:ON CERTAIN SPORT UTILITY VEHICLES EQUIPPED WITH ANTILOCK BRAKES (ABS), THE ABS MODULE CONNECTOR MAY HAVE MISSING OR DISLODGED WIRE SEALS. THIS CONDITION COULD ALLOW CONTAMINATION TO ENTER THE MODULE CONNECTOR, CREATING A POTENTIAL FOR AN ELECTRICAL SHORT. Consequence:AN ELECTRICAL SHORT MIGHT CAUSE AN ABS MALFUNCTION THAT WOULD ILLUMINATE THE ABS WARNING LIGHT, AND IN SOME CASES, THE MODULE MAY OVERHEAT RESULTING IN BURNING ODOR, SMOKE, AND/OR FIRE. THIS CONDITION COULD OCCUR EITHER WHEN THE VEHICLE IGNITION SWITCH IS IN THE OFF POSITION OR WHILE THE VEHICLE IS BEING OPERATED. Action:DEALERS WILL INSPECT THE WIRE HARNESS CONNECTOR TO THE ABS MODULE FOR MISSING OR DISLODGED WIRE SEALS, AND REPAIR OR REPLACE THE HARNESS CONNECTOR AS APPROPRIATE. THE DEALER WILL ALSO INSPECT THE CONNECTOR ON THE ABS MODULE AND REPLACE IT IF IT IS FOUND TO BE CORRODED OR DAMAGED. THE RECALL BEGAN ON MAY 9, 2007. OWNERS MAY CONTACT MAZDA AT 1-800-222-5500. | |
