Mazda Buyers Guide
Click a car name to see the crash test details for that model.
Crash Test Data for 2005 Mazda
| Mazda Vehicle | Front Star Rating | Side Star Rating | Rollover Resistance Rating | ||
|---|---|---|---|---|---|
| Driver | Passenger | Front Seat | Rear Seat | ||
| 2005 B-Series |  | | | Not Tested |  |
| 2005 B-Series | | |  | Not Tested | |
| 2005 Mazda3 | | | | | |
| 2005 Mazda6 | | | | | |
| 2005 Mazda6 | | | | | |
| 2005 Miata MX-5 | | | | Not Tested | |
| 2005 MPV | | | | | Not Tested |
| 2005 RX-8 | | | | | |
| 2005 Tribute | | | | | |
| 2005 Tribute | | | | | Not Tested |
Service Bulletins for 2005 Mazda
| 2005 MAZDA B-SERIES TRUCK | |
|---|---|
| Bulletin Number: 00-001-13-2748 | |
| MAZDA HAS DEVELOPED FACTORY RECOMMENDED SCHEDULED MAINTENANCE SERVICES THAT SUPPORT ALL MAJOR VEHICLE SYSTEMS. MAZDA RECOMMENDS DEALERS FOLLOW THE SCHEDULED MAINTENANCE TABLES AS CITED IN THE VEHICLE-SPECIFIC WORKSHOP MANUAL OR OWNERS MANU | |
| Bulletin Number: 00-001-13-2748A | |
| MAZDA HAS DEVELOPED FACTORY RECOMMENDED SCHEDULED MAINTENANCE SERVICES THAT SUPPORT ALL MAJOR VEHICLE SYSTEMS. MAZDA RECOMMENDS DEALERS FOLLOW THE SCHEDULED MAINTENANCE TABLES AS CITED IN THE VEHICLE-SPECIFIC WORKSHOP MANUAL OR OWNERS MANU | |
| Bulletin Number: 00-001-18-3446a | |
| Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle- specific workshop manual or owner's man | |
| Bulletin Number: 00-001-19-3560 | |
| Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle- specific workshop manual or owner's man | |
| Bulletin Number: 00-002-14-2936 | |
| MAZDA NORTH AMERICAN OPERATIONS RECEIVED MANY REQUESTS FROM OUR DEALERS ASKING US TO APPROVE ADDITIONAL ON-CAR BRAKE LATHES AS AN OPTION FOR MNAO AUTHORIZED EQUIPMENT. DUE TO YOUR FEEDBACK AND AFTER EVALUATING A FEW ON-CAR BRAKE LATHES, WE | |
| Bulletin Number: 00-002-19-3561 | |
| Mazda North American Operations has approved an additional on-car brake lathe as an option for MNAO authorized equipment. The Pro-Cut On-Car Brake Lathe has been added to the MNAO authorized equipment program. NOTE: Accu-turn is still an ap | |
| Bulletin Number: 00-003-18-3480 | |
| Mazda North American Operations has approved an additional on-car brake lathe as an option for MNAOauthorized equipment. The Pro-Cut On-Car Brake Lathe has been added to the MNAO authorizedequipment program.NOTE: Accu-turn is still an appro | |
| Bulletin Number: 00-003-18-3480a | |
| Mazda North American Operations has approved an additional on-car brake lathe as an option for MNAO authorized equipment. The Pro-Cut On-Car Brake Lathe has been added to the MNAO authorized equipment program. NOTE: Accu-turn is still an ap | |
| Bulletin Number: 00-003-19-3583 | |
| In support of the new MRT distribution, Mazda will ship to dealers a new Dual Purpose Diagnostic Leak Detector beginning March, 2019. Training videos will be posted to MGSS shortly and Workshop Manual procedures will be revised gradually. | |
| Bulletin Number: 00-004-12-2741 | |
| MAZDA HAS DEVELOPED FACTORY RECOMMENDED SCHEDULED MAINTENANCE SERVICES THAT SUPPORT ALL MAJOR VEHICLE SYSTEMS. MAZDA RECOMMENDS DEALERS FOLLOW THE SCHEDULED MAINTENANCE TABLES AS CITED IN THE VEHICLE-SPECIFIC WORKSHOP MANUAL OR OWNERS MANU | |
| Bulletin Number: 00204 | |
| EVAPORATIVE EMMISSIONS AND RECIVER ADAPTERS. *EH | |
| Bulletin Number: 00307 | |
| AVAILABILITY OF NON-REQUIRED TOOLS. *KB | |
| Bulletin Number: 01-001-19-3551 | |
| This service bulletin provides testing and charging procedures in order to promote proper battery maintenance, to deliver new vehicles with fully charged batteries, and to reduce unnecessary battery replacement cost. For new vehicles in sto | |
| Bulletin Number: 01-002-19-3552 | |
| The Mazda GR8-1291 is required for all warranty battery testing. If the Mazda GR8-1291 is not used, incorrect battery testing may result in unnecessary battery replacement. Use the following test procedures in this Service Bulletin to test | |
| Bulletin Number: 01-004-19-3558 | |
| On some vehicles, a sulfur smell or 'rotten egg' odor may be noticed coming from the exhaust system. The odor is usually noticed after a cold start, fast idle, extended periods of idling and full throttle acceleration. Sulfur smell is not a | |
| Bulletin Number: 01-008-18-3451 | |
| This service bulletin provides testing and charging procedures in order to promote proper battery maintenance, to deliver new vehicles with fully charged batteries, and to reduce unnecessary battery replacement cost. For new vehicles in sto | |
| Bulletin Number: 01-009-18-3452 | |
| The Mazda GR8-1291 is required for all warranty battery testing. If the Mazda GR8-1291 is not used, incorrect battery testing may result in unnecessary battery replacement. Use the following test procedures in this Service Bulletin to test | |
| Bulletin Number: 0101307 | |
| NO START/LOSS OF ENGINE TIMINGS/SCRAPING NOISE AT CRANKSHAFT PULLEY/POSSIBLE ENGINE DAMAGE. *KB | |
| Bulletin Number: 0101405 | |
| SPARK KNOCK DURING ACCEL, SURGE AT CRUISE (35-50 MPH), HIGH IDLE BETWEEN SHIFTS OR IN NEUTRAL (MANUAL TRANSMISSION VEHICLES ONLY). *TT | |
| Bulletin Number: 01-016-18-3522 | |
| On some vehicles, a sulfur smell or 'rotten egg' odor may be noticed coming from the exhaust system. The odor is usually noticed after a cold start, fast idle, extended periods of idling and full throttle acceleration. Sulfur smell is not a | |
| Bulletin Number: 0102206 | |
| FRONT CRANKSHAFT BOLT SERVICE WARNING. *NJ | |
| Bulletin Number: 02-001-13-2752 | |
| SOME CUSTOMERS MAY COMPLAIN OF SIGNS OF OIL ON THE STRUTS OR SHOCK ABSORBERS. IN MOST CASES THE OIL THAT IS PRESENT IS NORMAL, AND A RESULT OF THE OIL THAT REMAINS ON THE SHAFT DURING THE NORMAL SWEEPING PROCESS OF THE SHAFT SEAL. FOLLOW TH | |
| Bulletin Number: 02-001-19-3550 | |
| Some customers may complain of signs of oil on the struts or shock absorbers. In most cases the oil that is present is normal, and a result of the oil that remains on the shaft during the normal sweeping process of the shaft seal. Follow th | |
| Bulletin Number: 02-006-18-3449 | |
| Some customers may complain of signs of oil on the struts or shock absorbers. In most cases the oil that is present is normal, and a result of the oil that remains on the shaft during the normal sweeping process of the shaft seal. Follow th | |
| Bulletin Number: 0300104 | |
| THUMP / CLUNK FROM DRIVELINE ON LIGHT ACCELERATION OR WHEN STOPPING. *TT | |
| Bulletin Number: 0400504 | |
| GRABBING CONDITION FROM REAR DRUM BRAKES. *TT UPDATED 4/25/08. *NJ | |
| Bulletin Number: 05-001-16-3128 | |
| ALWAYS BE SURE TO USE THE CORRECT AUTOMATIC TRANSMISSION FLUID WHEN REPLACING ATF. USING THE WRONG ATF MAY CAUSE SHIFT QUALITY COMPLAINTS OR MAY EVEN DAMAGE THE TRANSMISSION.NOTE: ATF M-V (TYPE M5) IS NOT THE SAME FLUID AS MERCON®V OR MERC | |
| Bulletin Number: 05-001-18-3453 | |
| Always be sure to use the correct automatic transmission fluid when replacing ATF. Using the wrong ATF may cause shift quality complaints or may even damage the transmission. NOTE: ATF M-V (TYPE M5) IS NOT THE SAME FLUID AS MERCON®V OR MERC | |
| Bulletin Number: 05-002-13-2777 | |
| ALWAYS BE SURE TO USE THE CORRECT AUTOMATIC TRANSMISSION FLUID WHEN REPLACING ATF. USING THE WRONG ATF MAY CAUSE SHIFT QUALITY COMPLAINTS OR MAY EVEN DAMAGE THE TRANSMISSION.NOTE:ATF M-V (TYPE M5) IS NOT THE SAME FLUID AS MERCON®V OR MERCO | |
| Bulletin Number: 05-002-13-2777A | |
| ALWAYS BE SURE TO USE THE CORRECT AUTOMATIC TRANSMISSION FLUID WHEN REPLACING ATF. USING THE WRONG ATF MAY CAUSE SHIFT QUALITY COMPLAINTS OR MAY EVEN DAMAGE THE TRANSMISSION.NOTE:ATF M-V (TYPE M5) IS NOT THE SAME FLUID AS MERCON®V OR MERCO | |
| Bulletin Number: 0500805 | |
| MT-NOISE FROM CLUTCH SLAVE CYLINDER WHEN CLUTCH IS ENGAGED/DISENGAGED. INCLUDING 2004 MAZDA B-SERIES *SC | |
| Bulletin Number: 0515 | |
| EPC ERROR - 2004/2005 B4000 INTAKE GASKET. WHEN SERVICING THE INTAKE GASKET (D-CODE 13-096) ON 2004 AND 2005 B4000 TRUCKS BUILT AFTER 08/04/2003, USE PART NUMBER 1F72-13-096. *TT | |
| Bulletin Number: 0800306 | |
| NON GENUINE ACCESSORIES AFFECT AIR BAG OPERATION. *KB | |
| Bulletin Number: 0800405 | |
| SAFETY BELT RETRACTS TOO SLOWLY. MAZDA INCLUDING 2006 B-SERIES TRUCKS. *SC | |
| Bulletin Number: 09-002-19-3554 | |
| This service bulletin provides information regarding the proper use of the driver's floor mat to avoid anypotential interference with the foot pedals. The following are possible causes of floor mat interference,which can be avoided with pro | |
| Bulletin Number: 09-005-13-2781 | |
| THIS SERVICE BULLETIN PROVIDES INFORMATION REGARDING THE PROPER USE OF THE DRIVERS FLOOR MAT TO AVOID ANY POTEN-TIAL INTERFERENCE WITH THE FOOT PEDALS. THE FOLLOWING ARE POSSIBLE CAUSES OF FLOOR MAT INTERFERENCE, WHICH CAN BE AVOIDED WITH | |
| Bulletin Number: 09-005-19-3562 | |
| When encountering a vehicle with paint damage, refer to the "Mazda Pocket Paint Guide" to determine cause, prevention, remedy, and warranty coverage (if applicable). Copies of the Mazda Pocket Paint Guide are available for order on Mazda e- | |
| Bulletin Number: 0900805 | |
| BRAKE LAMPS INOPERATIVE-CHECK CENTER HIGH MOUNTED STOP LAMP (CHMSL)-SERVICE TIP. *SC | |
| Bulletin Number: 09-009-19-3566 | |
| In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer's responsibility to co | |
| Bulletin Number: 0901305 | |
| REMOVAL AND INSTALLATION OF BOLT-IN TYPE BACK GLASS TIP. MAZDA 2001-2005 B-SERIES TRUCKS *SC | |
| Bulletin Number: 09-014-18-3443 | |
| When encountering a vehicle with paint damage, refer to the "Mazda Pocket Paint Guide" to determine cause, prevention, remedy, and warranty coverage (if applicable). | |
| Bulletin Number: 09-014-18-3443a | |
| When encountering a vehicle with paint damage, refer to the "Mazda Pocket Paint Guide" to determine cause, prevention, remedy, and warranty coverage (if applicable). Copies of the Mazda Pocket Paint Guide are available for order on Mazda e- | |
| Bulletin Number: 0901703 | |
| ELECTRICAL - WIRING - SOLDERING AND CRIMPING REPAIRS - SERVICE TIP. *TT | |
| Bulletin Number: 09-019-18-3450 | |
| This service bulletin provides information regarding the proper use of the driver's floor mat to avoid any potential interference with the foot pedals. The following are possible causes of floor mat interference, which can be avoided with p | |
| Bulletin Number: 09-027-14-2935 | |
| THIS SERVICE BULLETIN PROVIDES INFORMATION REGARDING THE PROPER USE OF THE DRIVERS FLOOR MAT TO AVOID ANY POTENTIAL INTERFERENCE WITH THE FOOT PEDALS. THE FOLLOWING ARE POSSIBLE CAUSES OF FLOOR MAT INTERFERENCE, WHICH CAN BE AVOIDED WITH P | |
| Bulletin Number: 09-034-14-2956 | |
| IN ACCORDANCE WITH FEDERAL REGULATIONS, FOLLOW THE PROCEDURE LISTED BELOW WHEN REPLACING A SPEEDOMETER.NOTE:MAZDA VEHICLES ARE MANUFACTURED WITH TAMPER-PROOF SPEEDOMETERS.WHEN A SPEEDOMETER IS REPLACED, THE NEW SPEEDOMETER WILL READ ZERO | |
| Bulletin Number: 09-034-18-3430 | |
| In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer's responsibility to co | |
| Bulletin Number: 09-034-18-3430a | |
| In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer's responsibility to co | |
| Bulletin Number: 09-035-17-3080 | |
| In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer?s responsibility to co | |
| Bulletin Number: SA-013-19 | |
| MAZDA IDS INOPERATIVE WITH VCM-II LICENSE EXPIRATION MESSAGE - If you encounter an IDS inoperative problem with VCM-II license expiration message, follow the instructions below: 1. CLICK HERE to download the resetting tool to your PC deskto | |
| Bulletin Number: SA-061-17 | |
| In an effort to achieve a higher level of Customer Experience and retain the value of Mazda's vehicles, MNAO Warranty Operations is© 2017 Mazda North American Operations, U.S.A. allowing all Mazda dealers to utilize a third party, SPECMO En | |
| Bulletin Number: SA-068-17 | |
| STOPPER PLATES FOR AIR BAG MODULE CONNECTORS HAVE BEEN ESTABLISHED AS NEW SERVICE PARTS. When removing the connector (1) to the air bag module (2), make sure to first lift the stopper plate (3) carefully using a flathead screwdriver (but do | |
| 2005 MAZDA MAZDA3 | |
| Bulletin Number: 00-001-13-2748 | |
| MAZDA HAS DEVELOPED FACTORY RECOMMENDED SCHEDULED MAINTENANCE SERVICES THAT SUPPORT ALL MAJOR VEHICLE SYSTEMS. MAZDA RECOMMENDS DEALERS FOLLOW THE SCHEDULED MAINTENANCE TABLES AS CITED IN THE VEHICLE-SPECIFIC WORKSHOP MANUAL OR OWNERS MANU | |
| Bulletin Number: 00-001-13-2748A | |
| MAZDA HAS DEVELOPED FACTORY RECOMMENDED SCHEDULED MAINTENANCE SERVICES THAT SUPPORT ALL MAJOR VEHICLE SYSTEMS. MAZDA RECOMMENDS DEALERS FOLLOW THE SCHEDULED MAINTENANCE TABLES AS CITED IN THE VEHICLE-SPECIFIC WORKSHOP MANUAL OR OWNERS MANU | |
| Bulletin Number: 00-001-18-3446 | |
| Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle-specific workshop manual or owner's manu | |
| Bulletin Number: 00-001-18-3446a | |
| Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle- specific workshop manual or owner's man | |
| Bulletin Number: 00-001-19-3560 | |
| Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle- specific workshop manual or owner's man | |
| Bulletin Number: 00-002-14-2936 | |
| MAZDA NORTH AMERICAN OPERATIONS RECEIVED MANY REQUESTS FROM OUR DEALERS ASKING US TO APPROVE ADDITIONAL ON-CAR BRAKE LATHES AS AN OPTION FOR MNAO AUTHORIZED EQUIPMENT. DUE TO YOUR FEEDBACK AND AFTER EVALUATING A FEW ON-CAR BRAKE LATHES, WE | |
| Bulletin Number: 00-002-19-3561 | |
| Mazda North American Operations has approved an additional on-car brake lathe as an option for MNAO authorized equipment. The Pro-Cut On-Car Brake Lathe has been added to the MNAO authorized equipment program. NOTE: Accu-turn is still an ap | |
| Bulletin Number: 00-003-18-3480 | |
| Mazda North American Operations has approved an additional on-car brake lathe as an option for MNAOauthorized equipment. The Pro-Cut On-Car Brake Lathe has been added to the MNAO authorizedequipment program.NOTE: Accu-turn is still an appro | |
| Bulletin Number: 00-003-18-3480a | |
| Mazda North American Operations has approved an additional on-car brake lathe as an option for MNAO authorized equipment. The Pro-Cut On-Car Brake Lathe has been added to the MNAO authorized equipment program. NOTE: Accu-turn is still an ap | |
| Bulletin Number: 00-003-19-3583 | |
| In support of the new MRT distribution, Mazda will ship to dealers a new Dual Purpose Diagnostic Leak Detector beginning March, 2019. Training videos will be posted to MGSS shortly and Workshop Manual procedures will be revised gradually. | |
| Bulletin Number: 00-004-12-2741 | |
| MAZDA HAS DEVELOPED FACTORY RECOMMENDED SCHEDULED MAINTENANCE SERVICES THAT SUPPORT ALL MAJOR VEHICLE SYSTEMS. MAZDA RECOMMENDS DEALERS FOLLOW THE SCHEDULED MAINTENANCE TABLES AS CITED IN THE VEHICLE-SPECIFIC WORKSHOP MANUAL OR OWNERS MANU | |
| Bulletin Number: 00-004-16-3237 | |
| RAISING A VEHICLE WITH A JACK CAN BE DANGEROUS IF NOT DONE PROPERLY. THE VEHICLE CAN SLIP OFF THE JACK AND SERI-OUSLY INJURE SOMEONE. IN THIS SERVICE INFORMATION, SOME IMPORTANT WARNINGS AND CAUTIONS HAVE BEEN TAKEN FROM THE OWNERS MANUAL. | |
| Bulletin Number: 00204 | |
| EVAPORATIVE EMMISSIONS AND RECIVER ADAPTERS. *EH | |
| Bulletin Number: 00307 | |
| AVAILABILITY OF NON-REQUIRED TOOLS. *KB | |
| Bulletin Number: 01-001-19-3551 | |
| This service bulletin provides testing and charging procedures in order to promote proper battery maintenance, to deliver new vehicles with fully charged batteries, and to reduce unnecessary battery replacement cost. For new vehicles in sto | |
| Bulletin Number: 0100206 | |
| ENGINE MISFIRE DIAGNOSTIC PROCEDURES - SERVICE TIP. *TT | |
| Bulletin Number: 01-002-18-3417 | |
| Some vehicles may have a MIL illumination with DTC's P0441, P0442, P0455, or P0456 stored in memory. To determine the location of the evaporative system leak, follow the repair procedure below. P0441 - Evaporative emission control system in | |
| Bulletin Number: 01-002-19-3552 | |
| The Mazda GR8-1291 is required for all warranty battery testing. If the Mazda GR8-1291 is not used, incorrect battery testing may result in unnecessary battery replacement. Use the following test procedures in this Service Bulletin to test | |
| Bulletin Number: 0100305 | |
| DRIVE BELT PULLEY BREAKAGE / CHARGING WARNING LIGHT ON / OVERHEATING. *TT | |
| Bulletin Number: 01-003-08 | |
| MAZDA: ENGINE STALLS WHEN DRIVING AT LOW SPEED. *PE | |
| Bulletin Number: 01-003/08 | |
| MULTI-MODEL - ENGINE STALLS WHEN DRIVING AT LOW SPEED. *NJ | |
| Bulletin Number: 01-003-15-3014 | |
| USE THE FOLLOWING REPAIR PROCEDURE TO MINIMIZE THE NEED TO REPLACE THE CATALYST CONVERTER/EXHAUST PIPE WHEN REMOVING OXYGEN SENSORS AND/OR AIR FUEL RATIO SENSORS. | |
| Bulletin Number: 01-004-19-3558 | |
| On some vehicles, a sulfur smell or 'rotten egg' odor may be noticed coming from the exhaust system. The odor is usually noticed after a cold start, fast idle, extended periods of idling and full throttle acceleration. Sulfur smell is not a | |
| Bulletin Number: 0100606 | |
| MIL ILLUMINATION WITH DTC P0172 P2178 / P2188 STORED IN PCM MEMORY. *TT | |
| Bulletin Number: 01-006-11 | |
| MAZDA: A MALFUNCTION LIGHT IS ON WITH A STORED TROUBLE CODE. *RM | |
| Bulletin Number: 0100706 | |
| NO START DUE TO FROZEN MAIN RELAY. *TT | |
| Bulletin Number: 0100803 | |
| OIL FILTER CARTRIDGE REMOVAL. *TT ENGINE OIL FILTER CARTRIDGE HOUSING COVER DAMAGE. *TT | |
| Bulletin Number: 0100804 | |
| MALFUNCTION INDICATOR LAMP (MIL) WITH DTC P0128. *MR | |
| Bulletin Number: 0100806 | |
| 2.0L MT-FED /CAN ONLY - CRUISE SURGE. *AK | |
| Bulletin Number: 01-008-18-3451 | |
| This service bulletin provides testing and charging procedures in order to promote proper battery maintenance, to deliver new vehicles with fully charged batteries, and to reduce unnecessary battery replacement cost. For new vehicles in sto | |
| Bulletin Number: 01-009-18-3452 | |
| The Mazda GR8-1291 is required for all warranty battery testing. If the Mazda GR8-1291 is not used, incorrect battery testing may result in unnecessary battery replacement. Use the following test procedures in this Service Bulletin to test | |
| Bulletin Number: 01012005 | |
| WDS TRANSMISSION ID. *TT | |
| Bulletin Number: 01012006 | |
| KEY REMINDER CHIMES CONTINUOUSLY / KEYLESS ENTRY INOPERATIVE. *TT | |
| Bulletin Number: 0101505 | |
| FRONT CRANKSHAFT BOLT SERVICE WARNING. *SC | |
| Bulletin Number: 01-016-16-3220 | |
| THERE IS A CONCERN THAT SOME WATER PUMPS ARE BEING REPLACED THAT ARE NOT FAULTY, DUE TO SIGNS OF A VERY SMALL COOLANT LEAK FROM THE BLEED HOLE. THIS SERVICE BULLETIN IS TO INFORM YOU ABOUT THE WATER PUMP SEALING MECHA-NISM AND THE CRITERIA | |
| Bulletin Number: 01-016-18-3522 | |
| On some vehicles, a sulfur smell or 'rotten egg' odor may be noticed coming from the exhaust system. The odor is usually noticed after a cold start, fast idle, extended periods of idling and full throttle acceleration. Sulfur smell is not a | |
| Bulletin Number: 0102105 | |
| ENGINE VIBRATION/ KNOCKING NOISE/ NO. 3 ENGINE MOUNT RUBBER BROKEN. *SC UPDATED ON 09/25/07. *NJ | |
| Bulletin Number: 0102206 | |
| FRONT CRANKSHAFT BOLT SERVICE WARNING. *NJ | |
| Bulletin Number: 0102207 | |
| ENGINE STALLS WHEN DRIVING AT LOW SPEEDS. *KB | |
| Bulletin Number: 01-024/08 | |
| MIL COMES ON WITH DTC P2006 / VARIABLE TUMBLE SHUTTER VALVE CAN NOT COMPLETELY CLOSE. *NJ | |
| Bulletin Number: 0103306 | |
| ENGINE RPM DROPS/ENGINE STALLS. *TT | |
| Bulletin Number: 0104104 | |
| ENGINE HARD START (CRANKS BUT TAKES 10 SECONDS OR LONGER TO START). *TT | |
| Bulletin Number: 0104406 | |
| MALFUNCTION INDICATOR LIGHT ON WITH DTC P0106. *KB | |
| Bulletin Number: 02-001-13-2752 | |
| SOME CUSTOMERS MAY COMPLAIN OF SIGNS OF OIL ON THE STRUTS OR SHOCK ABSORBERS. IN MOST CASES THE OIL THAT IS PRESENT IS NORMAL, AND A RESULT OF THE OIL THAT REMAINS ON THE SHAFT DURING THE NORMAL SWEEPING PROCESS OF THE SHAFT SEAL. FOLLOW TH | |
| Bulletin Number: 02-001-19-3550 | |
| Some customers may complain of signs of oil on the struts or shock absorbers. In most cases the oil that is present is normal, and a result of the oil that remains on the shaft during the normal sweeping process of the shaft seal. Follow th | |
| Bulletin Number: 02-002-16-3124 | |
| SOME AUTOMOTIVE CLEANING PRODUCTS CONTAIN STRONG ACID OR ALKALI. WHEN THESE TYPES OF CLEANERS ARE USED TO CLEAN THE WHEELS ON MAZDA VEHICLES, THE CHEMICALS CONTENTS PENETRATE THE CLEAR COATING OF THE WHEEL SURFACE AND DAMAGE THE PAINT UNDER | |
| Bulletin Number: 02-002-19-3546 | |
| Some automotive cleaning products contain strong acid or alkali. When these types of cleaners are used to clean the wheels on Mazda vehicles, the chemicals contents penetrate the clear coating of the wheel surface and damage the paint under | |
| Bulletin Number: 0200406 | |
| TPMS VALVE STEM BREAKS WHEN REMOVING AFTERMARKET VALVE STEM CAPS - SERVICE TIP. *TT | |
| Bulletin Number: 02-004-13-2770 | |
| SOME CUSTOMERS MAY COMPLAIN THAT THE STEERING WHEEL IS OFF CENTER MORE THAN 3┬░ EVEN WHEN DRIVING STRAIGHT ON A FLAT ROAD. | |
| Bulletin Number: 02-004-13-2770A | |
| SOME CUSTOMERS MAY COMPLAIN THAT THE STEERING WHEEL IS OFF CENTER MORE THAN 3┬░ EVEN WHEN DRIVING STRAIGHT ON A FLAT ROAD. | |
| Bulletin Number: 02-004-13-2770B | |
| SOME CUSTOMERS MAY COMPLAIN THAT THE STEERING WHEEL IS OFF CENTER MORE THAN 3┬░ EVEN WHEN DRIVING STRAIGHT ON A FLAT ROAD. | |
| Bulletin Number: 02-004-14 | |
| SUMMARY TO BE PROVIDED ON A FUTURE DATE. | |
| Bulletin Number: 02-004-14-2976 | |
| SOME CUSTOMERS MAY COMPLAIN THAT THE STEERING WHEEL IS OFF CENTER MORE THAN 3┬░ EVEN WHEN DRIVING STRAIGHT ON A FLAT ROAD. FOLLOW STEERING WHEEL ALIGNMENT PROCEDURE. | |
| Bulletin Number: 02-004-19-3574 | |
| Some customers may complain that the steering wheel is off center more than 3┬░ even when driving straight on a flat road. | |
| Bulletin Number: 0200505 | |
| RUBBING NOISE WHEN TURNING STEERING WHEEL. *TT | |
| Bulletin Number: 02-006-18-3449 | |
| Some customers may complain of signs of oil on the struts or shock absorbers. In most cases the oil that is present is normal, and a result of the oil that remains on the shaft during the normal sweeping process of the shaft seal. Follow th | |
| Bulletin Number: 02-008-18-3467 | |
| Some automotive cleaning products contain strong acid or alkali. When these types of cleaners are used to clean the wheels on Mazda vehicles, the chemicals contents penetrate the clear coating of the wheel surface and damage the paint under | |
| Bulletin Number: 02-009-13-2854 | |
| Some automotive cleaning products contain strong acid or alkali. When these types of cleaners are used to clean the wheels on Mazda vehicles, the chemicals contents penetrate the clear coating of the wheel surface and damage the paint under | |
| Bulletin Number: 02-009-16-3155 | |
| SOME CUSTOMERS MAY COMPLAIN THAT THE STEERING WHEEL IS OFF CENTER MORE THAN 3┬░ EVEN WHEN DRIVING STRAIGHT ON A FLAT ROAD. | |
| Bulletin Number: 02-010-18-3477 | |
| Some customers may complain that the steering wheel is off center more than 3┬░ even when driving straight on a flat road. | |
| Bulletin Number: 0300106 | |
| BODY VIBRATION AT CRUISE SPEED. *TT | |
| Bulletin Number: 0300305 | |
| DRIVE SHAFT CLICK NOISE. *SC | |
| Bulletin Number: 03012005 | |
| CRUISE CONTROL SURGE.MAZDA REPAIR INFORMATION. *TT | |
| Bulletin Number: 03012005 | |
| FRONT AXLE CLICKING NOISE. MAZDA REPAIR INFORMATION. *TT | |
| Bulletin Number: 03012005 | |
| MALFUNCTION INDICATOR LAMP (MIL) O WITH P2177 / P2187 SET. MAZDA REPAIR INFORMATION. *TT | |
| Bulletin Number: 03012006 | |
| INTERMITTENT HARD TO STEER. *AK | |
| Bulletin Number: 03012006 | |
| VEHICLES MAY EXPERIENCE THE FOLLOWING:THE AIR CLEANER BOX MAY BE INAPPROPRIATE FOR THE VEHICLE.*AK | |
| Bulletin Number: 0400105 | |
| FRONT BRAKE SQUEAK WHEN COLD. *MR | |
| Bulletin Number: 0400107 | |
| ABS WARNING LIGHT ON WITH DTC C1141, C1142, C1233, OR C1234/GRINDING NOISE FROM THE FRONT WHEELS. *KB | |
| Bulletin Number: 04-002-19-3545 | |
| Some vehicles exhibit brake related concerns such as brake noise, brake judder or brake dragging. If you encounter a customer complaint for any one of these symptoms, refer to the following information to understand why symptoms may occur, | |
| Bulletin Number: 0400305 | |
| BRAKE SQUEAK / GRIND NOISE FROM REAR BRAKES. *TT | |
| Bulletin Number: 04-004-13-2853 | |
| Some vehicles exhibit brake related concerns such as brake noise, brake judder or brake dragging. If you encounter a customer complaint for any one of these symptoms, refer to the following information to understand why symptoms may occur, | |
| Bulletin Number: 04-004-14-2926 | |
| SOME VEHICLES EXHIBIT BRAKE RELATED CONCERNS SUCH AS BRAKE NOISE, BRAKE JUDDER OR BRAKE DRAGGING. IF YOU ENCOUNTER A CUSTOMER COMPLAINT FOR ANY ONE OF THESE SYMPTOMS, REFER TO THE FOLLOWING INFORMATION TO UNDERSTAND WHY SYMPTOMS MAY OCCUR, | |
| Bulletin Number: 04-004-16-3160 | |
| SOME VEHICLES EXHIBIT BRAKE RELATED CONCERNS SUCH AS BRAKE NOISE, BRAKE JUDDER OR BRAKE DRAGGING. IF YOU ENCOUNTER A CUSTOMER COMPLAINT FOR ANY ONE OF THESE SYMPTOMS, REFER TO THE FOLLOWING INFORMATION TO UNDERSTAND WHY SYMPTOMS MAY OCCUR, | |
| Bulletin Number: 04-004-18-3468 | |
| Some vehicles exhibit brake related concerns such as brake noise, brake judder or brake dragging. If you encounter a customer complaint for any one of these symptoms, refer to the following information to understand why symptoms may occur, | |
| Bulletin Number: 05-001-16-3128 | |
| ALWAYS BE SURE TO USE THE CORRECT AUTOMATIC TRANSMISSION FLUID WHEN REPLACING ATF. USING THE WRONG ATF MAY CAUSE SHIFT QUALITY COMPLAINTS OR MAY EVEN DAMAGE THE TRANSMISSION.NOTE: ATF M-V (TYPE M5) IS NOT THE SAME FLUID AS MERCON®V OR MERC | |
| Bulletin Number: 05-001-18-3453 | |
| Always be sure to use the correct automatic transmission fluid when replacing ATF. Using the wrong ATF may cause shift quality complaints or may even damage the transmission. NOTE: ATF M-V (TYPE M5) IS NOT THE SAME FLUID AS MERCON®V OR MERC | |
| Bulletin Number: 05-002-13-2777 | |
| ALWAYS BE SURE TO USE THE CORRECT AUTOMATIC TRANSMISSION FLUID WHEN REPLACING ATF. USING THE WRONG ATF MAY CAUSE SHIFT QUALITY COMPLAINTS OR MAY EVEN DAMAGE THE TRANSMISSION.NOTE:ATF M-V (TYPE M5) IS NOT THE SAME FLUID AS MERCON®V OR MERCO | |
| Bulletin Number: 05-002-13-2777A | |
| ALWAYS BE SURE TO USE THE CORRECT AUTOMATIC TRANSMISSION FLUID WHEN REPLACING ATF. USING THE WRONG ATF MAY CAUSE SHIFT QUALITY COMPLAINTS OR MAY EVEN DAMAGE THE TRANSMISSION.NOTE:ATF M-V (TYPE M5) IS NOT THE SAME FLUID AS MERCON®V OR MERCO | |
| Bulletin Number: 0501005 | |
| 1 - 2 SHIFT SHOCK. *TT | |
| Bulletin Number: 06-003/08 | |
| HEAVY STEERING EFFORT/POWER STEERING FLUID LEAKAGE. SOME MAZDA3 VEHICLES (EXCEPT MAZDASPEED3) WITH VIN'S LOWER THAN JM1BK**** **709745 (PRODUCED BEFORE FEB. 1, 2007) & SOME MAZDA5 VEHICLES WITH VIN'S LOWER THAN JM1CR**** **150635 (PRODUCE | |
| Bulletin Number: 07-002-13-2842 | |
| A MUSTY/MILDEW TYPE ODOR MAY COME FROM THE VENTS WHEN THE AIR CONDITIONING (A/C) SYSTEM IS OPERATING. IT IS MOST NOTICEABLE WHEN THE A/C IS FIRST TURNED ON. THIS ODOR IS THE RESULT OF MOLD GROWTH IN THE A/C EVAPORATOR/COOLING UNIT WHICH IS | |
| Bulletin Number: 07-002-18-3432 | |
| A musty/mildew type odor may come from the vents when the air conditioning (A/C) system is operating. It is most noticeable when the A/C is first turned ON. This odor is the result of mold growth in the A/Cevaporator/cooling unit which is c | |
| Bulletin Number: 07-002-19-3616 | |
| A musty/mildew type odor may come from the vents when the air conditioning (A/C) system is operating. It is most noticeable when the A/C is first turned ON. This odor is the result of mold growth in the A/C evaporator/cooling unit which is | |
| Bulletin Number: 0800107 | |
| AIRBAG WARNING LIGHT COMES ON WITH CODE B1877/B1881. *KB | |
| Bulletin Number: 08-001-13-2859 | |
| This information is provided to help address Passenger Airbag Deactivation (PAD) Indicator illumination con-cerns during vehicle service. | |
| Bulletin Number: 08-001-18-3457 | |
| This information is provided to help address Passenger Airbag Deactivation (PAD) Indicator illumination concerns during vehicle service. | |
| Bulletin Number: 08-001-19-3544 | |
| This information is provided to help address Passenger Airbag Deactivation (PAD) Indicator illumination concerns during vehicle service. | |
| Bulletin Number: 0800306 | |
| NON GENUINE ACCESSORIES AFFECT AIR BAG OPERATION. *KB | |
| Bulletin Number: 09-001-19-3553 | |
| When replacing the SiriusXM satellite radio unit (or a MAZDA CONNECT tuner and amp unit (TAU)) with replacement tuner for any reason, a call must be made to inform SiriusXM of the existing Radio ID and the new/replacement SAT Radio ID as so | |
| Bulletin Number: 09-002-19-3554 | |
| This service bulletin provides information regarding the proper use of the driver's floor mat to avoid anypotential interference with the foot pedals. The following are possible causes of floor mat interference,which can be avoided with pro | |
| Bulletin Number: 09-003-16-3130 | |
| SOME CUSTOMERS MAY COMPLAIN OF CONDENSATION/FOG INSIDE THE FRONT (HEADLAMP/HEADLIGHT) OR REAR (TAILLAMP/TAIL-LIGHT) COMBINATION LIGHTS. THE RECENT NEW MODELS HAVE BEEN FITTED WITH A CLEAR LENS WHICH CAN CAUSE THE SYMP-TOM TO BE MORE NOTICEA | |
| Bulletin Number: 09-003-19-3555 | |
| Some customers may complain of condensation/fog inside the front (headlamp/headlight) or rear (taillamp/taillight) combination lights. The recent new models have been fitted with a clear lens which can cause the symptom to be more noticeabl | |
| Bulletin Number: 09-003-19-3555a | |
| Some customers may complain of condensation/fog inside the front (headlamp/headlight) or rear (taillamp/taillight) combination lights. The recent new models have been fitted with a clear lens which can cause the symptom to be more noticeabl | |
| Bulletin Number: 09-004-19-3543 | |
| Mazda infotainment systems require contacting the proper source for diagnostic support, parts authorization, and parts exchange. Some components require prior authorization before ordering as exchange. Refer to DAG Exchange Central (MXConne | |
| Bulletin Number: 09-005-13-2781 | |
| THIS SERVICE BULLETIN PROVIDES INFORMATION REGARDING THE PROPER USE OF THE DRIVERS FLOOR MAT TO AVOID ANY POTEN-TIAL INTERFERENCE WITH THE FOOT PEDALS. THE FOLLOWING ARE POSSIBLE CAUSES OF FLOOR MAT INTERFERENCE, WHICH CAN BE AVOIDED WITH | |
| Bulletin Number: 09-005-19-3562 | |
| When encountering a vehicle with paint damage, refer to the "Mazda Pocket Paint Guide" to determine cause, prevention, remedy, and warranty coverage (if applicable). Copies of the Mazda Pocket Paint Guide are available for order on Mazda e- | |
| Bulletin Number: 09-007-14-2878 | |
| SOME CUSTOMERS MAY COMPLAIN OF CONDENSATION/FOG INSIDE THE FRONT OR REAR COMBINATION LIGHTS. THE RECENT NEW MODELS HAVE BEEN FITTED WITH A CLEAR LENS WHICH CAN CAUSE THE SYMPTOM TO BE MORE NOTICEABLE, HOWEVER, IT DOES NOT AFFECT THE PERFORM | |
| Bulletin Number: 09-008-17-3324 | |
| Take caution when cleaning plastic headlight lenses. Damage can occur when using some cleaners that contain strong acid, alkaline cleanser or organic solvent. Damage caused by using these cleaners is not covered by Mazda's New Vehicle Limit | |
| Bulletin Number: 09-009-19-3566 | |
| In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer's responsibility to co | |
| Bulletin Number: 09-011-18-3448 | |
| Some customers may complain of condensation/fog inside the front (headlamp/headlight) or rear (taillamp/taillight) combination lights. The recent new models have been fitted with a clear lens which can cause the symptom to be more noticeabl | |
| Bulletin Number: 0901205 | |
| ONE-TOUCH POWER WINDOW STOPS HALFWAY. *TT | |
| Bulletin Number: 09-012-14-2891 | |
| WHEN REPLACING THE SIRIUSXM SATELLITE RADIO UNIT (OR A MAZDA CONNECT TUNER AND AMP UNIT (TAU)) WITH REPLACEMENT TUNER FOR ANY REASON, A CALL MUST BE MADE TO INFORM SIRIUSXM OF THE EXISTING RADIO ID AND THE NEW/ REPLACEMENT SAT RADIO ID AS S | |
| Bulletin Number: 09-014-18-3443 | |
| When encountering a vehicle with paint damage, refer to the "Mazda Pocket Paint Guide" to determine cause, prevention, remedy, and warranty coverage (if applicable). | |
| Bulletin Number: 09-014-18-3443a | |
| When encountering a vehicle with paint damage, refer to the "Mazda Pocket Paint Guide" to determine cause, prevention, remedy, and warranty coverage (if applicable). Copies of the Mazda Pocket Paint Guide are available for order on Mazda e- | |
| Bulletin Number: 09-018-13-2803 | |
| SOME CUSTOMERS MAY COMPLAIN THAT THE AMBIENT TEMPERATURE DISPLAY IS NOT ACCURATE, OR IT TAKES TOO LONG FOR THE DISPLAY TO SHOW ACTUAL TEMPERATURE. WHEN YOU ENCOUNTER A CUSTOMER WITH THIS CONCERN, FIRST VERIFY THE CONDITION WHEN THE CUSTOMER | |
| Bulletin Number: 09018173351 | |
| Some customers may complain that the ambient temperature display is not accurate, or it takes too long for the display to show actual temperature. When you encounter a customer with this concern, first verify the condition when the customer | |
| Bulletin Number: 09-019-18-3450 | |
| This service bulletin provides information regarding the proper use of the driver's floor mat to avoid any potential interference with the foot pedals. The following are possible causes of floor mat interference, which can be avoided with p | |
| Bulletin Number: 0902206 | |
| UNUSUAL NOISE FROM FRONT WIPER LINK. *TT | |
| Bulletin Number: 09-023-14-2924 | |
| SOME CUSTOMERS MAY COMPLAIN THAT THE AMBIENT TEMPERATURE DISPLAY IS NOT ACCURATE, OR IT TAKES TOO LONG FOR THE DISPLAY TO SHOW ACTUAL TEMPERATURE.WHEN YOU ENCOUNTER A CUSTOMER WITH THIS CONCERN, FIRST VERIFY THE CONDITION WHEN THE CUSTOMER | |
| Bulletin Number: 09-023-18-3475 | |
| When replacing the SiriusXM satellite radio unit (or a MAZDA CONNECT tuner and amp unit (TAU)) with replacement tuner for any reason, a call must be made to inform SiriusXM of the existing Radio ID and the new/replacement SAT Radio ID as so | |
| Bulletin Number: 0902505 | |
| PASSENGER JUNCTION BOX (PJB) DIAGNOSTIC TIPS. *TT | |
| Bulletin Number: 09-025-18-3479 | |
| Mazda infotainment systems require contacting the proper source for diagnostic support, parts authorization, and parts exchange. Some components require prior authorization before ordering as exchange. Refer to DAG Exchange Central (MXConne | |
| Bulletin Number: 09-027-14-2935 | |
| THIS SERVICE BULLETIN PROVIDES INFORMATION REGARDING THE PROPER USE OF THE DRIVERS FLOOR MAT TO AVOID ANY POTENTIAL INTERFERENCE WITH THE FOOT PEDALS. THE FOLLOWING ARE POSSIBLE CAUSES OF FLOOR MAT INTERFERENCE, WHICH CAN BE AVOIDED WITH P | |
| Bulletin Number: 09-028-12-2701B | |
| THE MULTI INFORMATION DISPLAY (MID) AND NAVIGATION SYSTEM SUPPORT FOR DIAGNOSTICS, PARTS AUTHORIZATION, AND PARTS EXCHANGE REQUIRE CONTACTING THE PROPER SOURCE. PLEASE CONTACT THE APPROPRIATE SOURCE BY REFERRING TO THE FOLLOWING TABLES. | |
| Bulletin Number: 0903004 | |
| FRONT WIPERS DO NOT WIPE WELL. *TT | |
| Bulletin Number: 09-030-15-3073 | |
| MAZDA INFOTAINMENT SYSTEMS REQUIRE CONTACTING THE PROPER SOURCE FOR DIAGNOSTIC SUPPORT, PARTS AUTHORIZATION, AND PARTS EXCHANGE. SOME COMPONENTS REQUIRE PRIOR AUTHORIZATION BEFORE ORDERING AS EXCHANGE. REFER TO DAG EXCHANGE CENTRAL (MXCONN | |
| Bulletin Number: 09-034-14-2956 | |
| IN ACCORDANCE WITH FEDERAL REGULATIONS, FOLLOW THE PROCEDURE LISTED BELOW WHEN REPLACING A SPEEDOMETER.NOTE:MAZDA VEHICLES ARE MANUFACTURED WITH TAMPER-PROOF SPEEDOMETERS.WHEN A SPEEDOMETER IS REPLACED, THE NEW SPEEDOMETER WILL READ ZERO | |
| Bulletin Number: 09-034-18-3430 | |
| In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer's responsibility to co | |
| Bulletin Number: 09-034-18-3430a | |
| In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer's responsibility to co | |
| Bulletin Number: 09-035-17-3080 | |
| In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer?s responsibility to co | |
| Bulletin Number: 09-039-13-2852 | |
| SOME VEHICLES MAY EXHIBIT A CHATTERING NOISE AND THE DRIVER-SIDE SEAT LIFT CANNOT BE ADJUSTED BECAUSE THE LOCK PLATE GUIDE COMES OFF THE GUIDE CAM WHEN OPERATING THE LIFT. IF THE LIFT LEVER IS THEN OPERATED WITH THE LOCK PLATE GUIDE OFF, TH | |
| Bulletin Number: 09-043-12 | |
| SUMMARY TO BE PROVIDED ON A FUTURE DATE. | |
| Bulletin Number: 09-043-12-2676A | |
| SOME CUSTOMERS MAY COMPLAIN ABOUT A RATTLE NOISE IN THE DRIVERS SEAT (A) WHEN STOPPING OR STARTING THE VEHICLE. THIS RATTLE NOISE IS CAUSED BY A GAP BETWEEN THE SEAT FRAME AND THE LINK BRACKET. TO CORRECT THE PROBLEM, A BRACKET AND SEAT S | |
| Bulletin Number: 09-046-12-2744 | |
| SOME CUSTOMERS MAY COMPLAIN OF CONDENSATION/FOG INSIDE THE FRONT OR REAR COMBINATION LIGHTS. THE RECENT NEW MODELS HAVE BEEN FITTED WITH A CLEAR LENS WHICH CAN CAUSE THE SYMPTOM TO BE MORE NOTICEABLE, HOWEVER, IT DOES NOT AFFECT THE PERFORM | |
| Bulletin Number: 11012005 | |
| 2.0L (LF) ENGINE DIFFERENCES. *TT | |
| Bulletin Number: MT-003-18 | |
| The Workshop Manual has two-different airbag procedures, one for Standard Deployment and one for Two-Step Deployment. Standard Deployment is for Mexico spec vehicles and Two-Step Deployment is for US and Canadian spec vehicles. | |
| Bulletin Number: MT-012-18 | |
| If a vehicle has body vibration or steering wheel shimmy while driving and the root cause is determined to be tire balance, re-balance the tires using a Hunter GSP9700 or equivalent balance machine. If your dealer does not have a GSP9700 or | |
| Bulletin Number: MT-013-17 | |
| On some vehicles, the rear combination lamp lens becomes hazy and looks white when the brake or taillight is on. Due to heat accumulated by extended brake light (E) usage, the red inner cap (A) is melted (B) and the inner (C) and/or outer ( | |
| Bulletin Number: RF-11-12R | |
| SUMMARY TO BE PROVIDED ON A FUTURE DATE. | |
| Bulletin Number: SA-013-19 | |
| MAZDA IDS INOPERATIVE WITH VCM-II LICENSE EXPIRATION MESSAGE - If you encounter an IDS inoperative problem with VCM-II license expiration message, follow the instructions below: 1. CLICK HERE to download the resetting tool to your PC deskto | |
| Bulletin Number: SA-029-19 | |
| Due to a database error discovered with IDS 114.00-114.02 release (which affects Recall 3719F), it will be necessary to uninstall IDS 114 and install IDS 113.00 and 113.06 update. The Recall can be performed after removing IDS 114 and insta | |
| Bulletin Number: SA-029-19a | |
| The database error discovered with IDS 114.00-114.02 release has been fixed with IDS 114.04 release and is now available for download. | |
| Bulletin Number: SA-061-17 | |
| In an effort to achieve a higher level of Customer Experience and retain the value of Mazda's vehicles, MNAO Warranty Operations is© 2017 Mazda North American Operations, U.S.A. allowing all Mazda dealers to utilize a third party, SPECMO En | |
| Bulletin Number: SA234 | |
| IDS UPDATE 101.00 AND 101.02 IS NOW AVAILABLE ON MS3 UNDER THE "IDS/INFOTAINMENT" TAB. | |
| Bulletin Number: SB-01-007-09 | |
| MAZDA: VEHICLES MAY EXHIBIT A CONCERN OF UNSTABLE IDLING OR, IN SOME RARE CASES, STALLING, JUST AFTER THE VEHICLE STOPS WITH NO DTCS DETECTED. PROBLEM IS DUE TO THE ACCUMULATION OF CARBON DEPOSITS INSIDE THE THROTTLE BODY CAUSING AIR FLOW | |
| Bulletin Number: SB-01-012-09 | |
| MAZDA: MIL COMES ON WITH P2004/CHECK VALVE STUCK OPEN. SOME VEHICLES MAY EXPERIENCE AN MIL THAT COMES ON WITH DTC P2004 (VARIABLE TUMBLE SHUTTER VALVE STUCK OPEN). THE CAUSE MAY BE THE CHECK VALVE IN THE INTAKE MANIFOLD VACUUM CHAMBER BEING | |
| Bulletin Number: SB-01-023-10 | |
| MAZDA: DETERMINING EVAPORATIVE SYSTEM LEAK LOCATION FOR DTCS P0441, P0442, P0455, P0455. SOME VEHICLES MAY HAVE A MIL ILLUMINATION WITH DTCS STORED IN MEMORY. *PE UPDATED 4/18/11. *PE | |
| Bulletin Number: SB-01-028-10 | |
| MAZDA: VARIABLE VALVE TIMING (VVT) NOISE WHEN STARTING ENGINE. WHEN ENGINE IS FIRST STARTED, SOME VEHICLES MAY EXHIBIT A LOUD TICKING NOISE FROM THE VARIABLE VALVE TIMING (VVT) (A). THIS IS CAUSED BY THE LOCK PIN OF THE VARIABLE VALVE TIM | |
| Bulletin Number: SB-06-003-10 | |
| MAZDA: STEERING COLUMN SLIGHTLY MOVES IN OR OUT TELESCOPICALLY. SOME VEHICLES MAY EXHIBIT A SLIGHT IN OR OUT MOVEMENT OF THE STEERING WHEEL WHEN IT IS PUSHED OR PULLED, EVEN WITH THE STEERING WHEEL RELEASE LEVER PROPERLY LOCKED. *PE | |
| Bulletin Number: SB-08-001-13 | |
| MAZDA: INFORMATION PROVIDED REGARDING THE INDICATOR LIGHT ILLUMINATION OF THE PASSENGER AIRBAG DEACTIVATION (PAD). *PE | |
| Bulletin Number: SB-09-005-13 | |
| MAZDA: ON SOME VEHICLES, TO AVOID POTENTIAL INTERFERENCE OF FOOT PLACED ON PEDALS, INFORMATION IS PROVIDED REGARDING PROPER USE, AND PLACEMENT, OF DRIVER'S FLOOR MAT. VARIOUS MODELS AND MODEL YEARS. *PE | |
| Bulletin Number: SB-09-057-10 | |
| MAZDA: THERE IS CONDENSATION AND FOG IN THE FRONT AND REAR COMBINATION LIGHTS. *RM | |
| 2005 MAZDA MAZDA6 | |
| Bulletin Number: 00-001-13-2748 | |
| MAZDA HAS DEVELOPED FACTORY RECOMMENDED SCHEDULED MAINTENANCE SERVICES THAT SUPPORT ALL MAJOR VEHICLE SYSTEMS. MAZDA RECOMMENDS DEALERS FOLLOW THE SCHEDULED MAINTENANCE TABLES AS CITED IN THE VEHICLE-SPECIFIC WORKSHOP MANUAL OR OWNERS MANU | |
| Bulletin Number: 00-001-13-2748A | |
| MAZDA HAS DEVELOPED FACTORY RECOMMENDED SCHEDULED MAINTENANCE SERVICES THAT SUPPORT ALL MAJOR VEHICLE SYSTEMS. MAZDA RECOMMENDS DEALERS FOLLOW THE SCHEDULED MAINTENANCE TABLES AS CITED IN THE VEHICLE-SPECIFIC WORKSHOP MANUAL OR OWNERS MANU | |
| Bulletin Number: 00-001-18-3446 | |
| Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle-specific workshop manual or owner's manu | |
| Bulletin Number: 00-001-18-3446a | |
| Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle- specific workshop manual or owner's man | |
| Bulletin Number: 00-001-19-3560 | |
| Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle- specific workshop manual or owner's man | |
| Bulletin Number: 00-002-14-2936 | |
| MAZDA NORTH AMERICAN OPERATIONS RECEIVED MANY REQUESTS FROM OUR DEALERS ASKING US TO APPROVE ADDITIONAL ON-CAR BRAKE LATHES AS AN OPTION FOR MNAO AUTHORIZED EQUIPMENT. DUE TO YOUR FEEDBACK AND AFTER EVALUATING A FEW ON-CAR BRAKE LATHES, WE | |
| Bulletin Number: 00-002-19-3561 | |
| Mazda North American Operations has approved an additional on-car brake lathe as an option for MNAO authorized equipment. The Pro-Cut On-Car Brake Lathe has been added to the MNAO authorized equipment program. NOTE: Accu-turn is still an ap | |
| Bulletin Number: 00-003-18-3480 | |
| Mazda North American Operations has approved an additional on-car brake lathe as an option for MNAOauthorized equipment. The Pro-Cut On-Car Brake Lathe has been added to the MNAO authorizedequipment program.NOTE: Accu-turn is still an appro | |
| Bulletin Number: 00-003-18-3480a | |
| Mazda North American Operations has approved an additional on-car brake lathe as an option for MNAO authorized equipment. The Pro-Cut On-Car Brake Lathe has been added to the MNAO authorized equipment program. NOTE: Accu-turn is still an ap | |
| Bulletin Number: 00-003-19-3583 | |
| In support of the new MRT distribution, Mazda will ship to dealers a new Dual Purpose Diagnostic Leak Detector beginning March, 2019. Training videos will be posted to MGSS shortly and Workshop Manual procedures will be revised gradually. | |
| Bulletin Number: 00-004-12-2741 | |
| MAZDA HAS DEVELOPED FACTORY RECOMMENDED SCHEDULED MAINTENANCE SERVICES THAT SUPPORT ALL MAJOR VEHICLE SYSTEMS. MAZDA RECOMMENDS DEALERS FOLLOW THE SCHEDULED MAINTENANCE TABLES AS CITED IN THE VEHICLE-SPECIFIC WORKSHOP MANUAL OR OWNERS MANU | |
| Bulletin Number: 00-004-16-3237 | |
| RAISING A VEHICLE WITH A JACK CAN BE DANGEROUS IF NOT DONE PROPERLY. THE VEHICLE CAN SLIP OFF THE JACK AND SERI-OUSLY INJURE SOMEONE. IN THIS SERVICE INFORMATION, SOME IMPORTANT WARNINGS AND CAUTIONS HAVE BEEN TAKEN FROM THE OWNERS MANUAL. | |
| Bulletin Number: 00204 | |
| EVAPORATIVE EMMISSIONS AND RECIVER ADAPTERS. *EH | |
| Bulletin Number: 00307 | |
| AVAILABILITY OF NON-REQUIRED TOOLS. *KB | |
| Bulletin Number: 01-001-19-3551 | |
| This service bulletin provides testing and charging procedures in order to promote proper battery maintenance, to deliver new vehicles with fully charged batteries, and to reduce unnecessary battery replacement cost. For new vehicles in sto | |
| Bulletin Number: 0100206 | |
| ENGINE MISFIRE DIAGNOSTIC PROCEDURES - SERVICE TIP. *TT | |
| Bulletin Number: 01-002-13-2753 | |
| SOME VEHICLES MAY EXHIBIT A RATTLE NOISE AND/OR EXHAUST LEAKING NOISE FROM THE REAR OF THE VEHICLE. THE NOISE MAY BE CAUSED BY A GAP BETWEEN THE EXHAUST HANGER BRACKET AND FLANGE, WHICH ALLOWS MOISTURE CONTAINING ROAD SALT TO ENTER AND CAUS | |
| Bulletin Number: 01-002-18-3417 | |
| Some vehicles may have a MIL illumination with DTC's P0441, P0442, P0455, or P0456 stored in memory. To determine the location of the evaporative system leak, follow the repair procedure below. P0441 - Evaporative emission control system in | |
| Bulletin Number: 01-002-19-3552 | |
| The Mazda GR8-1291 is required for all warranty battery testing. If the Mazda GR8-1291 is not used, incorrect battery testing may result in unnecessary battery replacement. Use the following test procedures in this Service Bulletin to test | |
| Bulletin Number: 01-003-08 | |
| MAZDA: ENGINE STALLS WHEN DRIVING AT LOW SPEED. *PE | |
| Bulletin Number: 01-003/08 | |
| MULTI-MODEL - ENGINE STALLS WHEN DRIVING AT LOW SPEED. *NJ | |
| Bulletin Number: 01-003-15-3014 | |
| USE THE FOLLOWING REPAIR PROCEDURE TO MINIMIZE THE NEED TO REPLACE THE CATALYST CONVERTER/EXHAUST PIPE WHEN REMOVING OXYGEN SENSORS AND/OR AIR FUEL RATIO SENSORS. | |
| Bulletin Number: 01-004-19-3558 | |
| On some vehicles, a sulfur smell or 'rotten egg' odor may be noticed coming from the exhaust system. The odor is usually noticed after a cold start, fast idle, extended periods of idling and full throttle acceleration. Sulfur smell is not a | |
| Bulletin Number: 0100803 | |
| OIL FILTER CARTRIDGE REMOVAL. *TT ENGINE OIL FILTER CARTRIDGE HOUSING COVER DAMAGE. *TT | |
| Bulletin Number: 01-008-18-3451 | |
| This service bulletin provides testing and charging procedures in order to promote proper battery maintenance, to deliver new vehicles with fully charged batteries, and to reduce unnecessary battery replacement cost. For new vehicles in sto | |
| Bulletin Number: 0100907 | |
| ENGINE NO START DUE TO FROZEN MAIN RELAY/FUEL PUMP RELAY. *KB | |
| Bulletin Number: 01-009-18-3452 | |
| The Mazda GR8-1291 is required for all warranty battery testing. If the Mazda GR8-1291 is not used, incorrect battery testing may result in unnecessary battery replacement. Use the following test procedures in this Service Bulletin to test | |
| Bulletin Number: 01012006 | |
| CENTER PANEL REMOVAL CAUTION. *TT | |
| Bulletin Number: 01012006 | |
| RECIRC AIR FUNCTION INOPERATIVE. *TT | |
| Bulletin Number: 01-016-16-3220 | |
| THERE IS A CONCERN THAT SOME WATER PUMPS ARE BEING REPLACED THAT ARE NOT FAULTY, DUE TO SIGNS OF A VERY SMALL COOLANT LEAK FROM THE BLEED HOLE. THIS SERVICE BULLETIN IS TO INFORM YOU ABOUT THE WATER PUMP SEALING MECHA-NISM AND THE CRITERIA | |
| Bulletin Number: 01-016-18-3522 | |
| On some vehicles, a sulfur smell or 'rotten egg' odor may be noticed coming from the exhaust system. The odor is usually noticed after a cold start, fast idle, extended periods of idling and full throttle acceleration. Sulfur smell is not a | |
| Bulletin Number: 0101805 | |
| UNUSUAL NOISE FROM DRIVE BELT AUTO TENSIONER. *TT | |
| Bulletin Number: 0102205 | |
| DELAYED THROTTLE RESPONSE DURING LOW SPEED ACCELERATION. *TT | |
| Bulletin Number: 0102206 | |
| FRONT CRANKSHAFT BOLT SERVICE WARNING. *NJ | |
| Bulletin Number: 01-025/08 | |
| MIL ILLUMINATION ON WITH DTC P2112. VEHICLES PRODUCED BEFORE FEB. 4, 2008. *NJ | |
| Bulletin Number: 0104406 | |
| MALFUNCTION INDICATOR LIGHT ON WITH DTC P0106. *KB | |
| Bulletin Number: 02-001-13-2752 | |
| SOME CUSTOMERS MAY COMPLAIN OF SIGNS OF OIL ON THE STRUTS OR SHOCK ABSORBERS. IN MOST CASES THE OIL THAT IS PRESENT IS NORMAL, AND A RESULT OF THE OIL THAT REMAINS ON THE SHAFT DURING THE NORMAL SWEEPING PROCESS OF THE SHAFT SEAL. FOLLOW TH | |
| Bulletin Number: 02-001-19-3550 | |
| Some customers may complain of signs of oil on the struts or shock absorbers. In most cases the oil that is present is normal, and a result of the oil that remains on the shaft during the normal sweeping process of the shaft seal. Follow th | |
| Bulletin Number: 02-002-16-3124 | |
| SOME AUTOMOTIVE CLEANING PRODUCTS CONTAIN STRONG ACID OR ALKALI. WHEN THESE TYPES OF CLEANERS ARE USED TO CLEAN THE WHEELS ON MAZDA VEHICLES, THE CHEMICALS CONTENTS PENETRATE THE CLEAR COATING OF THE WHEEL SURFACE AND DAMAGE THE PAINT UNDER | |
| Bulletin Number: 02-002-19-3546 | |
| Some automotive cleaning products contain strong acid or alkali. When these types of cleaners are used to clean the wheels on Mazda vehicles, the chemicals contents penetrate the clear coating of the wheel surface and damage the paint under | |
| Bulletin Number: 02-004-13-2770 | |
| SOME CUSTOMERS MAY COMPLAIN THAT THE STEERING WHEEL IS OFF CENTER MORE THAN 3┬░ EVEN WHEN DRIVING STRAIGHT ON A FLAT ROAD. | |
| Bulletin Number: 02-004-13-2770A | |
| SOME CUSTOMERS MAY COMPLAIN THAT THE STEERING WHEEL IS OFF CENTER MORE THAN 3┬░ EVEN WHEN DRIVING STRAIGHT ON A FLAT ROAD. | |
| Bulletin Number: 02-004-13-2770B | |
| SOME CUSTOMERS MAY COMPLAIN THAT THE STEERING WHEEL IS OFF CENTER MORE THAN 3┬░ EVEN WHEN DRIVING STRAIGHT ON A FLAT ROAD. | |
| Bulletin Number: 02-004-14 | |
| SUMMARY TO BE PROVIDED ON A FUTURE DATE. | |
| Bulletin Number: 02-004-14-2976 | |
| SOME CUSTOMERS MAY COMPLAIN THAT THE STEERING WHEEL IS OFF CENTER MORE THAN 3┬░ EVEN WHEN DRIVING STRAIGHT ON A FLAT ROAD. FOLLOW STEERING WHEEL ALIGNMENT PROCEDURE. | |
| Bulletin Number: 02-004-19-3574 | |
| Some customers may complain that the steering wheel is off center more than 3┬░ even when driving straight on a flat road. | |
| Bulletin Number: 0200606 | |
| STEERING PULL/DRIFT-IMPROVED DIAGNOSTIC AND REPAIR PROCEDURES. *KB | |
| Bulletin Number: 02-006-18-3449 | |
| Some customers may complain of signs of oil on the struts or shock absorbers. In most cases the oil that is present is normal, and a result of the oil that remains on the shaft during the normal sweeping process of the shaft seal. Follow th | |
| Bulletin Number: 02-008-18-3467 | |
| Some automotive cleaning products contain strong acid or alkali. When these types of cleaners are used to clean the wheels on Mazda vehicles, the chemicals contents penetrate the clear coating of the wheel surface and damage the paint under | |
| Bulletin Number: 02-009-13-2854 | |
| Some automotive cleaning products contain strong acid or alkali. When these types of cleaners are used to clean the wheels on Mazda vehicles, the chemicals contents penetrate the clear coating of the wheel surface and damage the paint under | |
| Bulletin Number: 02-009-16-3155 | |
| SOME CUSTOMERS MAY COMPLAIN THAT THE STEERING WHEEL IS OFF CENTER MORE THAN 3┬░ EVEN WHEN DRIVING STRAIGHT ON A FLAT ROAD. | |
| Bulletin Number: 02-010-18-3477 | |
| Some customers may complain that the steering wheel is off center more than 3┬░ even when driving straight on a flat road. | |
| Bulletin Number: 04-002-19-3545 | |
| Some vehicles exhibit brake related concerns such as brake noise, brake judder or brake dragging. If you encounter a customer complaint for any one of these symptoms, refer to the following information to understand why symptoms may occur, | |
| Bulletin Number: 04-004-13-2853 | |
| Some vehicles exhibit brake related concerns such as brake noise, brake judder or brake dragging. If you encounter a customer complaint for any one of these symptoms, refer to the following information to understand why symptoms may occur, | |
| Bulletin Number: 04-004-14-2926 | |
| SOME VEHICLES EXHIBIT BRAKE RELATED CONCERNS SUCH AS BRAKE NOISE, BRAKE JUDDER OR BRAKE DRAGGING. IF YOU ENCOUNTER A CUSTOMER COMPLAINT FOR ANY ONE OF THESE SYMPTOMS, REFER TO THE FOLLOWING INFORMATION TO UNDERSTAND WHY SYMPTOMS MAY OCCUR, | |
| Bulletin Number: 04-004-16-3160 | |
| SOME VEHICLES EXHIBIT BRAKE RELATED CONCERNS SUCH AS BRAKE NOISE, BRAKE JUDDER OR BRAKE DRAGGING. IF YOU ENCOUNTER A CUSTOMER COMPLAINT FOR ANY ONE OF THESE SYMPTOMS, REFER TO THE FOLLOWING INFORMATION TO UNDERSTAND WHY SYMPTOMS MAY OCCUR, | |
| Bulletin Number: 04-004-18-3468 | |
| Some vehicles exhibit brake related concerns such as brake noise, brake judder or brake dragging. If you encounter a customer complaint for any one of these symptoms, refer to the following information to understand why symptoms may occur, | |
| Bulletin Number: 05-001-16-3128 | |
| ALWAYS BE SURE TO USE THE CORRECT AUTOMATIC TRANSMISSION FLUID WHEN REPLACING ATF. USING THE WRONG ATF MAY CAUSE SHIFT QUALITY COMPLAINTS OR MAY EVEN DAMAGE THE TRANSMISSION.NOTE: ATF M-V (TYPE M5) IS NOT THE SAME FLUID AS MERCON®V OR MERC | |
| Bulletin Number: 05-001-18-3453 | |
| Always be sure to use the correct automatic transmission fluid when replacing ATF. Using the wrong ATF may cause shift quality complaints or may even damage the transmission. NOTE: ATF M-V (TYPE M5) IS NOT THE SAME FLUID AS MERCON®V OR MERC | |
| Bulletin Number: 05-002-13-2777 | |
| ALWAYS BE SURE TO USE THE CORRECT AUTOMATIC TRANSMISSION FLUID WHEN REPLACING ATF. USING THE WRONG ATF MAY CAUSE SHIFT QUALITY COMPLAINTS OR MAY EVEN DAMAGE THE TRANSMISSION.NOTE:ATF M-V (TYPE M5) IS NOT THE SAME FLUID AS MERCON®V OR MERCO | |
| Bulletin Number: 05-002-13-2777A | |
| ALWAYS BE SURE TO USE THE CORRECT AUTOMATIC TRANSMISSION FLUID WHEN REPLACING ATF. USING THE WRONG ATF MAY CAUSE SHIFT QUALITY COMPLAINTS OR MAY EVEN DAMAGE THE TRANSMISSION.NOTE:ATF M-V (TYPE M5) IS NOT THE SAME FLUID AS MERCON®V OR MERCO | |
| Bulletin Number: 0500906 | |
| 1-2 SHIFT SHOCK (TRANS RELEARN PROCEDURE DELETED). VEHICLES WITH AUTOMATIC TRANSMISSIONS. *KB | |
| Bulletin Number: 0520 | |
| AUTOMATIC TRANSMISSION FLUID. *SC | |
| Bulletin Number: 0700105 | |
| FOGGING ON LOWER EXTERIOR OF WINDSHIELD. *TT | |
| Bulletin Number: 07-002-13-2842 | |
| A MUSTY/MILDEW TYPE ODOR MAY COME FROM THE VENTS WHEN THE AIR CONDITIONING (A/C) SYSTEM IS OPERATING. IT IS MOST NOTICEABLE WHEN THE A/C IS FIRST TURNED ON. THIS ODOR IS THE RESULT OF MOLD GROWTH IN THE A/C EVAPORATOR/COOLING UNIT WHICH IS | |
| Bulletin Number: 07-002-18-3432 | |
| A musty/mildew type odor may come from the vents when the air conditioning (A/C) system is operating. It is most noticeable when the A/C is first turned ON. This odor is the result of mold growth in the A/Cevaporator/cooling unit which is c | |
| Bulletin Number: 07-002-19-3616 | |
| A musty/mildew type odor may come from the vents when the air conditioning (A/C) system is operating. It is most noticeable when the A/C is first turned ON. This odor is the result of mold growth in the A/C evaporator/cooling unit which is | |
| Bulletin Number: 08-001-13-2859 | |
| This information is provided to help address Passenger Airbag Deactivation (PAD) Indicator illumination con-cerns during vehicle service. | |
| Bulletin Number: 08-001-18-3457 | |
| This information is provided to help address Passenger Airbag Deactivation (PAD) Indicator illumination concerns during vehicle service. | |
| Bulletin Number: 08-001-19-3544 | |
| This information is provided to help address Passenger Airbag Deactivation (PAD) Indicator illumination concerns during vehicle service. | |
| Bulletin Number: 0800306 | |
| NON GENUINE ACCESSORIES AFFECT AIR BAG OPERATION. *KB | |
| Bulletin Number: 08-003-17-3345 | |
| Mazda Motor Corporation is going to evaluate the following inflators to ensure the safety of the inflator with a desiccant. In order to do this, MNAO is collecting inflators for evaluation in certain zones. For 2003-2008 Mazda6 (including M | |
| Bulletin Number: 0800505 | |
| DEACTIVATION OF SEAT BELT MINDER. *SC | |
| Bulletin Number: 09-001-19-3553 | |
| When replacing the SiriusXM satellite radio unit (or a MAZDA CONNECT tuner and amp unit (TAU)) with replacement tuner for any reason, a call must be made to inform SiriusXM of the existing Radio ID and the new/replacement SAT Radio ID as so | |
| Bulletin Number: 09-002-19-3554 | |
| This service bulletin provides information regarding the proper use of the driver's floor mat to avoid anypotential interference with the foot pedals. The following are possible causes of floor mat interference,which can be avoided with pro | |
| Bulletin Number: 09-003-16-3130 | |
| SOME CUSTOMERS MAY COMPLAIN OF CONDENSATION/FOG INSIDE THE FRONT (HEADLAMP/HEADLIGHT) OR REAR (TAILLAMP/TAIL-LIGHT) COMBINATION LIGHTS. THE RECENT NEW MODELS HAVE BEEN FITTED WITH A CLEAR LENS WHICH CAN CAUSE THE SYMP-TOM TO BE MORE NOTICEA | |
| Bulletin Number: 09-003-19-3555 | |
| Some customers may complain of condensation/fog inside the front (headlamp/headlight) or rear (taillamp/taillight) combination lights. The recent new models have been fitted with a clear lens which can cause the symptom to be more noticeabl | |
| Bulletin Number: 09-003-19-3555a | |
| Some customers may complain of condensation/fog inside the front (headlamp/headlight) or rear (taillamp/taillight) combination lights. The recent new models have been fitted with a clear lens which can cause the symptom to be more noticeabl | |
| Bulletin Number: 09-004-19-3543 | |
| Mazda infotainment systems require contacting the proper source for diagnostic support, parts authorization, and parts exchange. Some components require prior authorization before ordering as exchange. Refer to DAG Exchange Central (MXConne | |
| Bulletin Number: 09-005-13-2781 | |
| THIS SERVICE BULLETIN PROVIDES INFORMATION REGARDING THE PROPER USE OF THE DRIVERS FLOOR MAT TO AVOID ANY POTEN-TIAL INTERFERENCE WITH THE FOOT PEDALS. THE FOLLOWING ARE POSSIBLE CAUSES OF FLOOR MAT INTERFERENCE, WHICH CAN BE AVOIDED WITH | |
| Bulletin Number: 09-005-19-3562 | |
| When encountering a vehicle with paint damage, refer to the "Mazda Pocket Paint Guide" to determine cause, prevention, remedy, and warranty coverage (if applicable). Copies of the Mazda Pocket Paint Guide are available for order on Mazda e- | |
| Bulletin Number: 0900705 | |
| IMPROPER SEAT WARMER OPERATION. *TT | |
| Bulletin Number: 09-007/08 | |
| HEADLIGHT LENS CONDENSATION OR WATER ENTRY - (NOT APPLICABLE TO MAZDASPEED6). *NJ | |
| Bulletin Number: 09-007-14-2878 | |
| SOME CUSTOMERS MAY COMPLAIN OF CONDENSATION/FOG INSIDE THE FRONT OR REAR COMBINATION LIGHTS. THE RECENT NEW MODELS HAVE BEEN FITTED WITH A CLEAR LENS WHICH CAN CAUSE THE SYMPTOM TO BE MORE NOTICEABLE, HOWEVER, IT DOES NOT AFFECT THE PERFORM | |
| Bulletin Number: 09-008-17-3324 | |
| Take caution when cleaning plastic headlight lenses. Damage can occur when using some cleaners that contain strong acid, alkaline cleanser or organic solvent. Damage caused by using these cleaners is not covered by Mazda's New Vehicle Limit | |
| Bulletin Number: 09-009-19-3566 | |
| In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer's responsibility to co | |
| Bulletin Number: 09-011-18-3448 | |
| Some customers may complain of condensation/fog inside the front (headlamp/headlight) or rear (taillamp/taillight) combination lights. The recent new models have been fitted with a clear lens which can cause the symptom to be more noticeabl | |
| Bulletin Number: 09-012-14-2891 | |
| WHEN REPLACING THE SIRIUSXM SATELLITE RADIO UNIT (OR A MAZDA CONNECT TUNER AND AMP UNIT (TAU)) WITH REPLACEMENT TUNER FOR ANY REASON, A CALL MUST BE MADE TO INFORM SIRIUSXM OF THE EXISTING RADIO ID AND THE NEW/ REPLACEMENT SAT RADIO ID AS S | |
| Bulletin Number: 09-014-18-3443 | |
| When encountering a vehicle with paint damage, refer to the "Mazda Pocket Paint Guide" to determine cause, prevention, remedy, and warranty coverage (if applicable). | |
| Bulletin Number: 09-014-18-3443a | |
| When encountering a vehicle with paint damage, refer to the "Mazda Pocket Paint Guide" to determine cause, prevention, remedy, and warranty coverage (if applicable). Copies of the Mazda Pocket Paint Guide are available for order on Mazda e- | |
| Bulletin Number: 09-018-13-2803 | |
| SOME CUSTOMERS MAY COMPLAIN THAT THE AMBIENT TEMPERATURE DISPLAY IS NOT ACCURATE, OR IT TAKES TOO LONG FOR THE DISPLAY TO SHOW ACTUAL TEMPERATURE. WHEN YOU ENCOUNTER A CUSTOMER WITH THIS CONCERN, FIRST VERIFY THE CONDITION WHEN THE CUSTOMER | |
| Bulletin Number: 09018173351 | |
| Some customers may complain that the ambient temperature display is not accurate, or it takes too long for the display to show actual temperature. When you encounter a customer with this concern, first verify the condition when the customer | |
| Bulletin Number: 09-019-18-3450 | |
| This service bulletin provides information regarding the proper use of the driver's floor mat to avoid any potential interference with the foot pedals. The following are possible causes of floor mat interference, which can be avoided with p | |
| Bulletin Number: 09-023-14-2924 | |
| SOME CUSTOMERS MAY COMPLAIN THAT THE AMBIENT TEMPERATURE DISPLAY IS NOT ACCURATE, OR IT TAKES TOO LONG FOR THE DISPLAY TO SHOW ACTUAL TEMPERATURE.WHEN YOU ENCOUNTER A CUSTOMER WITH THIS CONCERN, FIRST VERIFY THE CONDITION WHEN THE CUSTOMER | |
| Bulletin Number: 09-023-18-3475 | |
| When replacing the SiriusXM satellite radio unit (or a MAZDA CONNECT tuner and amp unit (TAU)) with replacement tuner for any reason, a call must be made to inform SiriusXM of the existing Radio ID and the new/replacement SAT Radio ID as so | |
| Bulletin Number: 09-025-18-3479 | |
| Mazda infotainment systems require contacting the proper source for diagnostic support, parts authorization, and parts exchange. Some components require prior authorization before ordering as exchange. Refer to DAG Exchange Central (MXConne | |
| Bulletin Number: 09-027-14-2935 | |
| THIS SERVICE BULLETIN PROVIDES INFORMATION REGARDING THE PROPER USE OF THE DRIVERS FLOOR MAT TO AVOID ANY POTENTIAL INTERFERENCE WITH THE FOOT PEDALS. THE FOLLOWING ARE POSSIBLE CAUSES OF FLOOR MAT INTERFERENCE, WHICH CAN BE AVOIDED WITH P | |
| Bulletin Number: 09-030-15-3073 | |
| MAZDA INFOTAINMENT SYSTEMS REQUIRE CONTACTING THE PROPER SOURCE FOR DIAGNOSTIC SUPPORT, PARTS AUTHORIZATION, AND PARTS EXCHANGE. SOME COMPONENTS REQUIRE PRIOR AUTHORIZATION BEFORE ORDERING AS EXCHANGE. REFER TO DAG EXCHANGE CENTRAL (MXCONN | |
| Bulletin Number: 09-034-14-2956 | |
| IN ACCORDANCE WITH FEDERAL REGULATIONS, FOLLOW THE PROCEDURE LISTED BELOW WHEN REPLACING A SPEEDOMETER.NOTE:MAZDA VEHICLES ARE MANUFACTURED WITH TAMPER-PROOF SPEEDOMETERS.WHEN A SPEEDOMETER IS REPLACED, THE NEW SPEEDOMETER WILL READ ZERO | |
| Bulletin Number: 09-034-18-3430 | |
| In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer's responsibility to co | |
| Bulletin Number: 09-034-18-3430a | |
| In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer's responsibility to co | |
| Bulletin Number: 09-035-17-3080 | |
| In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer?s responsibility to co | |
| Bulletin Number: 09-039-13-2852 | |
| SOME VEHICLES MAY EXHIBIT A CHATTERING NOISE AND THE DRIVER-SIDE SEAT LIFT CANNOT BE ADJUSTED BECAUSE THE LOCK PLATE GUIDE COMES OFF THE GUIDE CAM WHEN OPERATING THE LIFT. IF THE LIFT LEVER IS THEN OPERATED WITH THE LOCK PLATE GUIDE OFF, TH | |
| Bulletin Number: 09-046-12-2744 | |
| SOME CUSTOMERS MAY COMPLAIN OF CONDENSATION/FOG INSIDE THE FRONT OR REAR COMBINATION LIGHTS. THE RECENT NEW MODELS HAVE BEEN FITTED WITH A CLEAR LENS WHICH CAN CAUSE THE SYMPTOM TO BE MORE NOTICEABLE, HOWEVER, IT DOES NOT AFFECT THE PERFORM | |
| Bulletin Number: 10 | |
| MAZDA SERVICE PROGRAM #10 - THE MALFUNCTION INDICATOR LIGHT (MIL) MAY ILLUMINATE DURING AN OBD CHECK AT AN INSPECTION/MAINTENANCE (I/M) STATION CAUSING THE VEHICLE TO FAIL THE INSPECTION/MAINTENANCE STATION (I/M) TEST EVEN THOUGH THE VEHICL | |
| Bulletin Number: 11012005 | |
| INFORMATION DISPLAY FUNCTIONS. *TT | |
| Bulletin Number: 17-04 | |
| A newly established short cord (P/N GAY2-67-SH0) has been released if a connector is broken when performing Recall 9416E. | |
| Bulletin Number: MT-003-18 | |
| The Workshop Manual has two-different airbag procedures, one for Standard Deployment and one for Two-Step Deployment. Standard Deployment is for Mexico spec vehicles and Two-Step Deployment is for US and Canadian spec vehicles. | |
| Bulletin Number: MT-012-18 | |
| If a vehicle has body vibration or steering wheel shimmy while driving and the root cause is determined to be tire balance, re-balance the tires using a Hunter GSP9700 or equivalent balance machine. If your dealer does not have a GSP9700 or | |
| Bulletin Number: RF-04-14R4 | |
| SUMMARY TO BE PROVIDED ON A FUTURE DATE. | |
| Bulletin Number: SA-013-19 | |
| MAZDA IDS INOPERATIVE WITH VCM-II LICENSE EXPIRATION MESSAGE - If you encounter an IDS inoperative problem with VCM-II license expiration message, follow the instructions below: 1. CLICK HERE to download the resetting tool to your PC deskto | |
| Bulletin Number: SA-029-19 | |
| Due to a database error discovered with IDS 114.00-114.02 release (which affects Recall 3719F), it will be necessary to uninstall IDS 114 and install IDS 113.00 and 113.06 update. The Recall can be performed after removing IDS 114 and insta | |
| Bulletin Number: SA-029-19a | |
| The database error discovered with IDS 114.00-114.02 release has been fixed with IDS 114.04 release and is now available for download. | |
| Bulletin Number: SA-061-17 | |
| In an effort to achieve a higher level of Customer Experience and retain the value of Mazda's vehicles, MNAO Warranty Operations is© 2017 Mazda North American Operations, U.S.A. allowing all Mazda dealers to utilize a third party, SPECMO En | |
| Bulletin Number: SA-068-17 | |
| STOPPER PLATES FOR AIR BAG MODULE CONNECTORS HAVE BEEN ESTABLISHED AS NEW SERVICE PARTS. When removing the connector (1) to the air bag module (2), make sure to first lift the stopper plate (3) carefully using a flathead screwdriver (but do | |
| Bulletin Number: SA234 | |
| IDS UPDATE 101.00 AND 101.02 IS NOW AVAILABLE ON MS3 UNDER THE "IDS/INFOTAINMENT" TAB. | |
| Bulletin Number: SA327 | |
| TAKATA RECALLS GENERAL INFORMATION PURPOSE: THIS PAGE WAS CREATED TO ASSIST WITH HANDLING TAKATA AIR BAG RECALLS. PROCESSES: PLEASE USE THESE PROCESS FLOWCHARTS TO PROPERLY HANDLE VEHICLES SUBJECT TO THE TAKATA AIR BAG RECALL. RECALL 82 | |
| Bulletin Number: SB-01-007-09 | |
| MAZDA: VEHICLES MAY EXHIBIT A CONCERN OF UNSTABLE IDLING OR, IN SOME RARE CASES, STALLING, JUST AFTER THE VEHICLE STOPS WITH NO DTCS DETECTED. PROBLEM IS DUE TO THE ACCUMULATION OF CARBON DEPOSITS INSIDE THE THROTTLE BODY CAUSING AIR FLOW | |
| Bulletin Number: SB-01-023-10 | |
| MAZDA: DETERMINING EVAPORATIVE SYSTEM LEAK LOCATION FOR DTCS P0441, P0442, P0455, P0455. SOME VEHICLES MAY HAVE A MIL ILLUMINATION WITH DTCS STORED IN MEMORY. *PE UPDATED 4/18/11. *PE | |
| Bulletin Number: SB-01-028-10 | |
| MAZDA: VARIABLE VALVE TIMING (VVT) NOISE WHEN STARTING ENGINE. WHEN ENGINE IS FIRST STARTED, SOME VEHICLES MAY EXHIBIT A LOUD TICKING NOISE FROM THE VARIABLE VALVE TIMING (VVT) (A). THIS IS CAUSED BY THE LOCK PIN OF THE VARIABLE VALVE TIM | |
| Bulletin Number: SB-08-001-13 | |
| MAZDA: INFORMATION PROVIDED REGARDING THE INDICATOR LIGHT ILLUMINATION OF THE PASSENGER AIRBAG DEACTIVATION (PAD). *PE | |
| Bulletin Number: SB-09-005-13 | |
| MAZDA: ON SOME VEHICLES, TO AVOID POTENTIAL INTERFERENCE OF FOOT PLACED ON PEDALS, INFORMATION IS PROVIDED REGARDING PROPER USE, AND PLACEMENT, OF DRIVER'S FLOOR MAT. VARIOUS MODELS AND MODEL YEARS. *PE | |
| Bulletin Number: SB-09-057-10 | |
| MAZDA: THERE IS CONDENSATION AND FOG IN THE FRONT AND REAR COMBINATION LIGHTS. *RM | |
| 2005 MAZDA MIATA | |
| Bulletin Number: 00-001-13-2748 | |
| MAZDA HAS DEVELOPED FACTORY RECOMMENDED SCHEDULED MAINTENANCE SERVICES THAT SUPPORT ALL MAJOR VEHICLE SYSTEMS. MAZDA RECOMMENDS DEALERS FOLLOW THE SCHEDULED MAINTENANCE TABLES AS CITED IN THE VEHICLE-SPECIFIC WORKSHOP MANUAL OR OWNERS MANU | |
| Bulletin Number: 00-001-13-2748A | |
| MAZDA HAS DEVELOPED FACTORY RECOMMENDED SCHEDULED MAINTENANCE SERVICES THAT SUPPORT ALL MAJOR VEHICLE SYSTEMS. MAZDA RECOMMENDS DEALERS FOLLOW THE SCHEDULED MAINTENANCE TABLES AS CITED IN THE VEHICLE-SPECIFIC WORKSHOP MANUAL OR OWNERS MANU | |
| Bulletin Number: 00-001-18-3446 | |
| Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle-specific workshop manual or owner's manu | |
| Bulletin Number: 00-001-18-3446a | |
| Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle- specific workshop manual or owner's man | |
| Bulletin Number: 00-001-19-3560 | |
| Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle- specific workshop manual or owner's man | |
| Bulletin Number: 00-002-14-2936 | |
| MAZDA NORTH AMERICAN OPERATIONS RECEIVED MANY REQUESTS FROM OUR DEALERS ASKING US TO APPROVE ADDITIONAL ON-CAR BRAKE LATHES AS AN OPTION FOR MNAO AUTHORIZED EQUIPMENT. DUE TO YOUR FEEDBACK AND AFTER EVALUATING A FEW ON-CAR BRAKE LATHES, WE | |
| Bulletin Number: 00-002-19-3561 | |
| Mazda North American Operations has approved an additional on-car brake lathe as an option for MNAO authorized equipment. The Pro-Cut On-Car Brake Lathe has been added to the MNAO authorized equipment program. NOTE: Accu-turn is still an ap | |
| Bulletin Number: 00-003-18-3480 | |
| Mazda North American Operations has approved an additional on-car brake lathe as an option for MNAOauthorized equipment. The Pro-Cut On-Car Brake Lathe has been added to the MNAO authorizedequipment program.NOTE: Accu-turn is still an appro | |
| Bulletin Number: 00-003-18-3480a | |
| Mazda North American Operations has approved an additional on-car brake lathe as an option for MNAO authorized equipment. The Pro-Cut On-Car Brake Lathe has been added to the MNAO authorized equipment program. NOTE: Accu-turn is still an ap | |
| Bulletin Number: 00-003-19-3583 | |
| In support of the new MRT distribution, Mazda will ship to dealers a new Dual Purpose Diagnostic Leak Detector beginning March, 2019. Training videos will be posted to MGSS shortly and Workshop Manual procedures will be revised gradually. | |
| Bulletin Number: 00-004/12 | |
| SUMMARY TO BE PROVIDED ON A FUTURE DATE. | |
| Bulletin Number: 00-004-12-2741 | |
| MAZDA HAS DEVELOPED FACTORY RECOMMENDED SCHEDULED MAINTENANCE SERVICES THAT SUPPORT ALL MAJOR VEHICLE SYSTEMS. MAZDA RECOMMENDS DEALERS FOLLOW THE SCHEDULED MAINTENANCE TABLES AS CITED IN THE VEHICLE-SPECIFIC WORKSHOP MANUAL OR OWNERS MANU | |
| Bulletin Number: 00307 | |
| AVAILABILITY OF NON-REQUIRED TOOLS. *KB | |
| Bulletin Number: 01-001-19-3551 | |
| This service bulletin provides testing and charging procedures in order to promote proper battery maintenance, to deliver new vehicles with fully charged batteries, and to reduce unnecessary battery replacement cost. For new vehicles in sto | |
| Bulletin Number: 01-002-19-3552 | |
| The Mazda GR8-1291 is required for all warranty battery testing. If the Mazda GR8-1291 is not used, incorrect battery testing may result in unnecessary battery replacement. Use the following test procedures in this Service Bulletin to test | |
| Bulletin Number: 01-003-15-3014 | |
| USE THE FOLLOWING REPAIR PROCEDURE TO MINIMIZE THE NEED TO REPLACE THE CATALYST CONVERTER/EXHAUST PIPE WHEN REMOVING OXYGEN SENSORS AND/OR AIR FUEL RATIO SENSORS. | |
| Bulletin Number: 01-004-19-3558 | |
| On some vehicles, a sulfur smell or 'rotten egg' odor may be noticed coming from the exhaust system. The odor is usually noticed after a cold start, fast idle, extended periods of idling and full throttle acceleration. Sulfur smell is not a | |
| Bulletin Number: 01-008-18-3451 | |
| This service bulletin provides testing and charging procedures in order to promote proper battery maintenance, to deliver new vehicles with fully charged batteries, and to reduce unnecessary battery replacement cost. For new vehicles in sto | |
| Bulletin Number: 01-009-18-3452 | |
| The Mazda GR8-1291 is required for all warranty battery testing. If the Mazda GR8-1291 is not used, incorrect battery testing may result in unnecessary battery replacement. Use the following test procedures in this Service Bulletin to test | |
| Bulletin Number: 0101106 | |
| NO START OR HARD TO START. *TT | |
| Bulletin Number: 01-016-16-3220 | |
| THERE IS A CONCERN THAT SOME WATER PUMPS ARE BEING REPLACED THAT ARE NOT FAULTY, DUE TO SIGNS OF A VERY SMALL COOLANT LEAK FROM THE BLEED HOLE. THIS SERVICE BULLETIN IS TO INFORM YOU ABOUT THE WATER PUMP SEALING MECHA-NISM AND THE CRITERIA | |
| Bulletin Number: 01-016-18-3522 | |
| On some vehicles, a sulfur smell or 'rotten egg' odor may be noticed coming from the exhaust system. The odor is usually noticed after a cold start, fast idle, extended periods of idling and full throttle acceleration. Sulfur smell is not a | |
| Bulletin Number: 02-001-13-2752 | |
| SOME CUSTOMERS MAY COMPLAIN OF SIGNS OF OIL ON THE STRUTS OR SHOCK ABSORBERS. IN MOST CASES THE OIL THAT IS PRESENT IS NORMAL, AND A RESULT OF THE OIL THAT REMAINS ON THE SHAFT DURING THE NORMAL SWEEPING PROCESS OF THE SHAFT SEAL. FOLLOW TH | |
| Bulletin Number: 02-001-19-3550 | |
| Some customers may complain of signs of oil on the struts or shock absorbers. In most cases the oil that is present is normal, and a result of the oil that remains on the shaft during the normal sweeping process of the shaft seal. Follow th | |
| Bulletin Number: 02-002-16-3124 | |
| SOME AUTOMOTIVE CLEANING PRODUCTS CONTAIN STRONG ACID OR ALKALI. WHEN THESE TYPES OF CLEANERS ARE USED TO CLEAN THE WHEELS ON MAZDA VEHICLES, THE CHEMICALS CONTENTS PENETRATE THE CLEAR COATING OF THE WHEEL SURFACE AND DAMAGE THE PAINT UNDER | |
| Bulletin Number: 02-002-19-3546 | |
| Some automotive cleaning products contain strong acid or alkali. When these types of cleaners are used to clean the wheels on Mazda vehicles, the chemicals contents penetrate the clear coating of the wheel surface and damage the paint under | |
| Bulletin Number: 02-006-18-3449 | |
| Some customers may complain of signs of oil on the struts or shock absorbers. In most cases the oil that is present is normal, and a result of the oil that remains on the shaft during the normal sweeping process of the shaft seal. Follow th | |
| Bulletin Number: 02-008-18-3467 | |
| Some automotive cleaning products contain strong acid or alkali. When these types of cleaners are used to clean the wheels on Mazda vehicles, the chemicals contents penetrate the clear coating of the wheel surface and damage the paint under | |
| Bulletin Number: 02-009-13-2854 | |
| Some automotive cleaning products contain strong acid or alkali. When these types of cleaners are used to clean the wheels on Mazda vehicles, the chemicals contents penetrate the clear coating of the wheel surface and damage the paint under | |
| Bulletin Number: 07-002-13-2842 | |
| A MUSTY/MILDEW TYPE ODOR MAY COME FROM THE VENTS WHEN THE AIR CONDITIONING (A/C) SYSTEM IS OPERATING. IT IS MOST NOTICEABLE WHEN THE A/C IS FIRST TURNED ON. THIS ODOR IS THE RESULT OF MOLD GROWTH IN THE A/C EVAPORATOR/COOLING UNIT WHICH IS | |
| Bulletin Number: 07-002-18-3432 | |
| A musty/mildew type odor may come from the vents when the air conditioning (A/C) system is operating. It is most noticeable when the A/C is first turned ON. This odor is the result of mold growth in the A/Cevaporator/cooling unit which is c | |
| Bulletin Number: 07-002-19-3616 | |
| A musty/mildew type odor may come from the vents when the air conditioning (A/C) system is operating. It is most noticeable when the A/C is first turned ON. This odor is the result of mold growth in the A/C evaporator/cooling unit which is | |
| Bulletin Number: 08-001-13-2859 | |
| This information is provided to help address Passenger Airbag Deactivation (PAD) Indicator illumination con-cerns during vehicle service. | |
| Bulletin Number: 08-001-18-3457 | |
| This information is provided to help address Passenger Airbag Deactivation (PAD) Indicator illumination concerns during vehicle service. | |
| Bulletin Number: 08-001-19-3544 | |
| This information is provided to help address Passenger Airbag Deactivation (PAD) Indicator illumination concerns during vehicle service. | |
| Bulletin Number: 0800306 | |
| NON GENUINE ACCESSORIES AFFECT AIR BAG OPERATION. *KB | |
| Bulletin Number: 09-001-16-3113 | |
| IF THE IMMOBILIZER UNIT LC62-67-5G2* OR DC69-67-5G2* NEEDS TO BE REPLACED WITH A NEW ONE, THESE PARTS ARE NO LONGER AVAILABLE. NEW ALTERNATIVE SERVICE PARTS KITS ARE NOW AVAILABLE, INCLUDING ALTERNATIVE IMMOBILIZER UNIT BJ3D-67-5G2L OR TC91 | |
| Bulletin Number: 09-001-19-3553 | |
| When replacing the SiriusXM satellite radio unit (or a MAZDA CONNECT tuner and amp unit (TAU)) with replacement tuner for any reason, a call must be made to inform SiriusXM of the existing Radio ID and the new/replacement SAT Radio ID as so | |
| Bulletin Number: 09-002-19-3554 | |
| This service bulletin provides information regarding the proper use of the driver's floor mat to avoid anypotential interference with the foot pedals. The following are possible causes of floor mat interference,which can be avoided with pro | |
| Bulletin Number: 09-005-13-2781 | |
| THIS SERVICE BULLETIN PROVIDES INFORMATION REGARDING THE PROPER USE OF THE DRIVERS FLOOR MAT TO AVOID ANY POTEN-TIAL INTERFERENCE WITH THE FOOT PEDALS. THE FOLLOWING ARE POSSIBLE CAUSES OF FLOOR MAT INTERFERENCE, WHICH CAN BE AVOIDED WITH | |
| Bulletin Number: 09-005-19-3562 | |
| When encountering a vehicle with paint damage, refer to the "Mazda Pocket Paint Guide" to determine cause, prevention, remedy, and warranty coverage (if applicable). Copies of the Mazda Pocket Paint Guide are available for order on Mazda e- | |
| Bulletin Number: 09-009-19-3566 | |
| In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer's responsibility to co | |
| Bulletin Number: 09-012-14-2891 | |
| WHEN REPLACING THE SIRIUSXM SATELLITE RADIO UNIT (OR A MAZDA CONNECT TUNER AND AMP UNIT (TAU)) WITH REPLACEMENT TUNER FOR ANY REASON, A CALL MUST BE MADE TO INFORM SIRIUSXM OF THE EXISTING RADIO ID AND THE NEW/ REPLACEMENT SAT RADIO ID AS S | |
| Bulletin Number: 09-014-18-3443 | |
| When encountering a vehicle with paint damage, refer to the "Mazda Pocket Paint Guide" to determine cause, prevention, remedy, and warranty coverage (if applicable). | |
| Bulletin Number: 09-014-18-3443a | |
| When encountering a vehicle with paint damage, refer to the "Mazda Pocket Paint Guide" to determine cause, prevention, remedy, and warranty coverage (if applicable). Copies of the Mazda Pocket Paint Guide are available for order on Mazda e- | |
| Bulletin Number: 09-019-18-3450 | |
| This service bulletin provides information regarding the proper use of the driver's floor mat to avoid any potential interference with the foot pedals. The following are possible causes of floor mat interference, which can be avoided with p | |
| Bulletin Number: 09-023-18-3475 | |
| When replacing the SiriusXM satellite radio unit (or a MAZDA CONNECT tuner and amp unit (TAU)) with replacement tuner for any reason, a call must be made to inform SiriusXM of the existing Radio ID and the new/replacement SAT Radio ID as so | |
| Bulletin Number: 09-027-14-2935 | |
| THIS SERVICE BULLETIN PROVIDES INFORMATION REGARDING THE PROPER USE OF THE DRIVERS FLOOR MAT TO AVOID ANY POTENTIAL INTERFERENCE WITH THE FOOT PEDALS. THE FOLLOWING ARE POSSIBLE CAUSES OF FLOOR MAT INTERFERENCE, WHICH CAN BE AVOIDED WITH P | |
| Bulletin Number: 09-034-14-2956 | |
| IN ACCORDANCE WITH FEDERAL REGULATIONS, FOLLOW THE PROCEDURE LISTED BELOW WHEN REPLACING A SPEEDOMETER.NOTE:MAZDA VEHICLES ARE MANUFACTURED WITH TAMPER-PROOF SPEEDOMETERS.WHEN A SPEEDOMETER IS REPLACED, THE NEW SPEEDOMETER WILL READ ZERO | |
| Bulletin Number: 09-034-18-3430 | |
| In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer's responsibility to co | |
| Bulletin Number: 09-034-18-3430a | |
| In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer's responsibility to co | |
| Bulletin Number: 09-035-17-3080 | |
| In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer?s responsibility to co | |
| Bulletin Number: MT-012-18 | |
| If a vehicle has body vibration or steering wheel shimmy while driving and the root cause is determined to be tire balance, re-balance the tires using a Hunter GSP9700 or equivalent balance machine. If your dealer does not have a GSP9700 or | |
| Bulletin Number: SA-061-17 | |
| In an effort to achieve a higher level of Customer Experience and retain the value of Mazda's vehicles, MNAO Warranty Operations is© 2017 Mazda North American Operations, U.S.A. allowing all Mazda dealers to utilize a third party, SPECMO En | |
| Bulletin Number: SB-08-001-13 | |
| MAZDA: INFORMATION PROVIDED REGARDING THE INDICATOR LIGHT ILLUMINATION OF THE PASSENGER AIRBAG DEACTIVATION (PAD). *PE | |
| Bulletin Number: SB-09-005-13 | |
| MAZDA: ON SOME VEHICLES, TO AVOID POTENTIAL INTERFERENCE OF FOOT PLACED ON PEDALS, INFORMATION IS PROVIDED REGARDING PROPER USE, AND PLACEMENT, OF DRIVER'S FLOOR MAT. VARIOUS MODELS AND MODEL YEARS. *PE | |
| 2005 MAZDA MPV | |
| Bulletin Number: 00-001-13-2748 | |
| MAZDA HAS DEVELOPED FACTORY RECOMMENDED SCHEDULED MAINTENANCE SERVICES THAT SUPPORT ALL MAJOR VEHICLE SYSTEMS. MAZDA RECOMMENDS DEALERS FOLLOW THE SCHEDULED MAINTENANCE TABLES AS CITED IN THE VEHICLE-SPECIFIC WORKSHOP MANUAL OR OWNERS MANU | |
| Bulletin Number: 00-001-13-2748A | |
| MAZDA HAS DEVELOPED FACTORY RECOMMENDED SCHEDULED MAINTENANCE SERVICES THAT SUPPORT ALL MAJOR VEHICLE SYSTEMS. MAZDA RECOMMENDS DEALERS FOLLOW THE SCHEDULED MAINTENANCE TABLES AS CITED IN THE VEHICLE-SPECIFIC WORKSHOP MANUAL OR OWNERS MANU | |
| Bulletin Number: 00-001-18-3446 | |
| Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle-specific workshop manual or owner's manu | |
| Bulletin Number: 00-001-18-3446a | |
| Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle- specific workshop manual or owner's man | |
| Bulletin Number: 00-001-19-3560 | |
| Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle- specific workshop manual or owner's man | |
| Bulletin Number: 00-002-14-2936 | |
| MAZDA NORTH AMERICAN OPERATIONS RECEIVED MANY REQUESTS FROM OUR DEALERS ASKING US TO APPROVE ADDITIONAL ON-CAR BRAKE LATHES AS AN OPTION FOR MNAO AUTHORIZED EQUIPMENT. DUE TO YOUR FEEDBACK AND AFTER EVALUATING A FEW ON-CAR BRAKE LATHES, WE | |
| Bulletin Number: 00-002-19-3561 | |
| Mazda North American Operations has approved an additional on-car brake lathe as an option for MNAO authorized equipment. The Pro-Cut On-Car Brake Lathe has been added to the MNAO authorized equipment program. NOTE: Accu-turn is still an ap | |
| Bulletin Number: 00-003-18-3480 | |
| Mazda North American Operations has approved an additional on-car brake lathe as an option for MNAOauthorized equipment. The Pro-Cut On-Car Brake Lathe has been added to the MNAO authorizedequipment program.NOTE: Accu-turn is still an appro | |
| Bulletin Number: 00-003-18-3480a | |
| Mazda North American Operations has approved an additional on-car brake lathe as an option for MNAO authorized equipment. The Pro-Cut On-Car Brake Lathe has been added to the MNAO authorized equipment program. NOTE: Accu-turn is still an ap | |
| Bulletin Number: 00-003-19-3583 | |
| In support of the new MRT distribution, Mazda will ship to dealers a new Dual Purpose Diagnostic Leak Detector beginning March, 2019. Training videos will be posted to MGSS shortly and Workshop Manual procedures will be revised gradually. | |
| Bulletin Number: 00-004-12-2741 | |
| MAZDA HAS DEVELOPED FACTORY RECOMMENDED SCHEDULED MAINTENANCE SERVICES THAT SUPPORT ALL MAJOR VEHICLE SYSTEMS. MAZDA RECOMMENDS DEALERS FOLLOW THE SCHEDULED MAINTENANCE TABLES AS CITED IN THE VEHICLE-SPECIFIC WORKSHOP MANUAL OR OWNERS MANU | |
| Bulletin Number: 00-004-16-3237 | |
| RAISING A VEHICLE WITH A JACK CAN BE DANGEROUS IF NOT DONE PROPERLY. THE VEHICLE CAN SLIP OFF THE JACK AND SERI-OUSLY INJURE SOMEONE. IN THIS SERVICE INFORMATION, SOME IMPORTANT WARNINGS AND CAUTIONS HAVE BEEN TAKEN FROM THE OWNERS MANUAL. | |
| Bulletin Number: 00204 | |
| EVAPORATIVE EMMISSIONS AND RECIVER ADAPTERS. *EH | |
| Bulletin Number: 00307 | |
| AVAILABILITY OF NON-REQUIRED TOOLS. *KB | |
| Bulletin Number: 01-001-19-3551 | |
| This service bulletin provides testing and charging procedures in order to promote proper battery maintenance, to deliver new vehicles with fully charged batteries, and to reduce unnecessary battery replacement cost. For new vehicles in sto | |
| Bulletin Number: 01-002-19-3552 | |
| The Mazda GR8-1291 is required for all warranty battery testing. If the Mazda GR8-1291 is not used, incorrect battery testing may result in unnecessary battery replacement. Use the following test procedures in this Service Bulletin to test | |
| Bulletin Number: 01-003-15-3014 | |
| USE THE FOLLOWING REPAIR PROCEDURE TO MINIMIZE THE NEED TO REPLACE THE CATALYST CONVERTER/EXHAUST PIPE WHEN REMOVING OXYGEN SENSORS AND/OR AIR FUEL RATIO SENSORS. | |
| Bulletin Number: 01-004-19-3558 | |
| On some vehicles, a sulfur smell or 'rotten egg' odor may be noticed coming from the exhaust system. The odor is usually noticed after a cold start, fast idle, extended periods of idling and full throttle acceleration. Sulfur smell is not a | |
| Bulletin Number: 01-008-18-3451 | |
| This service bulletin provides testing and charging procedures in order to promote proper battery maintenance, to deliver new vehicles with fully charged batteries, and to reduce unnecessary battery replacement cost. For new vehicles in sto | |
| Bulletin Number: 01-009-18-3452 | |
| The Mazda GR8-1291 is required for all warranty battery testing. If the Mazda GR8-1291 is not used, incorrect battery testing may result in unnecessary battery replacement. Use the following test procedures in this Service Bulletin to test | |
| Bulletin Number: 01-016-18-3522 | |
| On some vehicles, a sulfur smell or 'rotten egg' odor may be noticed coming from the exhaust system. The odor is usually noticed after a cold start, fast idle, extended periods of idling and full throttle acceleration. Sulfur smell is not a | |
| Bulletin Number: 0103305 | |
| ENGINE NO START IN EXTREME COLD WEATHER. *TT | |
| Bulletin Number: 0105406 | |
| ENGINE HARD TO START, RUNS ROUGH. *KB | |
| Bulletin Number: 02-001-13-2752 | |
| SOME CUSTOMERS MAY COMPLAIN OF SIGNS OF OIL ON THE STRUTS OR SHOCK ABSORBERS. IN MOST CASES THE OIL THAT IS PRESENT IS NORMAL, AND A RESULT OF THE OIL THAT REMAINS ON THE SHAFT DURING THE NORMAL SWEEPING PROCESS OF THE SHAFT SEAL. FOLLOW TH | |
| Bulletin Number: 02-001-19-3550 | |
| Some customers may complain of signs of oil on the struts or shock absorbers. In most cases the oil that is present is normal, and a result of the oil that remains on the shaft during the normal sweeping process of the shaft seal. Follow th | |
| Bulletin Number: 02-006-18-3449 | |
| Some customers may complain of signs of oil on the struts or shock absorbers. In most cases the oil that is present is normal, and a result of the oil that remains on the shaft during the normal sweeping process of the shaft seal. Follow th | |
| Bulletin Number: 03012005 | |
| CORRECTION TO TRANSMISSION CONTROL MODULE (TCM) CAUTION. MAZDA M-TIPS. *TT | |
| Bulletin Number: 0500105 | |
| O/D OFF INDICATOR LIGHT FLASHING / MALFUNCTION INDICATOR LAMP (MIL) WITH DIAGNOSTIC TROUBLE CODE (DTC) P0706. *TT | |
| Bulletin Number: 0700104 | |
| AIR TEMPERATURE OUTPUT DIFFERENCE BETWEEN CENTER DASH VENTS. *MR THIS BULLETIN REPLACED THE PREVIOUS BULLETIN ISSUED ON 02/12/04. *TT | |
| Bulletin Number: 07-002-13-2842 | |
| A MUSTY/MILDEW TYPE ODOR MAY COME FROM THE VENTS WHEN THE AIR CONDITIONING (A/C) SYSTEM IS OPERATING. IT IS MOST NOTICEABLE WHEN THE A/C IS FIRST TURNED ON. THIS ODOR IS THE RESULT OF MOLD GROWTH IN THE A/C EVAPORATOR/COOLING UNIT WHICH IS | |
| Bulletin Number: 07-002-18-3432 | |
| A musty/mildew type odor may come from the vents when the air conditioning (A/C) system is operating. It is most noticeable when the A/C is first turned ON. This odor is the result of mold growth in the A/Cevaporator/cooling unit which is c | |
| Bulletin Number: 07-002-19-3616 | |
| A musty/mildew type odor may come from the vents when the air conditioning (A/C) system is operating. It is most noticeable when the A/C is first turned ON. This odor is the result of mold growth in the A/C evaporator/cooling unit which is | |
| Bulletin Number: 08-001-13-2859 | |
| This information is provided to help address Passenger Airbag Deactivation (PAD) Indicator illumination con-cerns during vehicle service. | |
| Bulletin Number: 08-001-18-3457 | |
| This information is provided to help address Passenger Airbag Deactivation (PAD) Indicator illumination concerns during vehicle service. | |
| Bulletin Number: 08-001-19-3544 | |
| This information is provided to help address Passenger Airbag Deactivation (PAD) Indicator illumination concerns during vehicle service. | |
| Bulletin Number: 0800306 | |
| NON GENUINE ACCESSORIES AFFECT AIR BAG OPERATION. *KB | |
| Bulletin Number: 09-002-19-3554 | |
| This service bulletin provides information regarding the proper use of the driver's floor mat to avoid anypotential interference with the foot pedals. The following are possible causes of floor mat interference,which can be avoided with pro | |
| Bulletin Number: 09-004-19-3543 | |
| Mazda infotainment systems require contacting the proper source for diagnostic support, parts authorization, and parts exchange. Some components require prior authorization before ordering as exchange. Refer to DAG Exchange Central (MXConne | |
| Bulletin Number: 09-005-13-2781 | |
| THIS SERVICE BULLETIN PROVIDES INFORMATION REGARDING THE PROPER USE OF THE DRIVERS FLOOR MAT TO AVOID ANY POTEN-TIAL INTERFERENCE WITH THE FOOT PEDALS. THE FOLLOWING ARE POSSIBLE CAUSES OF FLOOR MAT INTERFERENCE, WHICH CAN BE AVOIDED WITH | |
| Bulletin Number: 09-005-19-3562 | |
| When encountering a vehicle with paint damage, refer to the "Mazda Pocket Paint Guide" to determine cause, prevention, remedy, and warranty coverage (if applicable). Copies of the Mazda Pocket Paint Guide are available for order on Mazda e- | |
| Bulletin Number: 09-009-19-3566 | |
| In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer's responsibility to co | |
| Bulletin Number: 0901105 | |
| POWER WINDOWS INOPERATIVE - BLOWN FUSE. TO INCLUDE 2006 MAZDA MPV. *TT | |
| Bulletin Number: 09-014-18-3443 | |
| When encountering a vehicle with paint damage, refer to the "Mazda Pocket Paint Guide" to determine cause, prevention, remedy, and warranty coverage (if applicable). | |
| Bulletin Number: 09-014-18-3443a | |
| When encountering a vehicle with paint damage, refer to the "Mazda Pocket Paint Guide" to determine cause, prevention, remedy, and warranty coverage (if applicable). Copies of the Mazda Pocket Paint Guide are available for order on Mazda e- | |
| Bulletin Number: 09-019-18-3450 | |
| This service bulletin provides information regarding the proper use of the driver's floor mat to avoid any potential interference with the foot pedals. The following are possible causes of floor mat interference, which can be avoided with p | |
| Bulletin Number: 09-025-18-3479 | |
| Mazda infotainment systems require contacting the proper source for diagnostic support, parts authorization, and parts exchange. Some components require prior authorization before ordering as exchange. Refer to DAG Exchange Central (MXConne | |
| Bulletin Number: 0902605 | |
| POWER SLIDING DOOR (PSD) RE-OPENS AFTER STARTING TO CLOSE AND LATCH. *TT | |
| Bulletin Number: 09-027-14-2935 | |
| THIS SERVICE BULLETIN PROVIDES INFORMATION REGARDING THE PROPER USE OF THE DRIVERS FLOOR MAT TO AVOID ANY POTENTIAL INTERFERENCE WITH THE FOOT PEDALS. THE FOLLOWING ARE POSSIBLE CAUSES OF FLOOR MAT INTERFERENCE, WHICH CAN BE AVOIDED WITH P | |
| Bulletin Number: 09-030-15-3073 | |
| MAZDA INFOTAINMENT SYSTEMS REQUIRE CONTACTING THE PROPER SOURCE FOR DIAGNOSTIC SUPPORT, PARTS AUTHORIZATION, AND PARTS EXCHANGE. SOME COMPONENTS REQUIRE PRIOR AUTHORIZATION BEFORE ORDERING AS EXCHANGE. REFER TO DAG EXCHANGE CENTRAL (MXCONN | |
| Bulletin Number: 09-034-14-2956 | |
| IN ACCORDANCE WITH FEDERAL REGULATIONS, FOLLOW THE PROCEDURE LISTED BELOW WHEN REPLACING A SPEEDOMETER.NOTE:MAZDA VEHICLES ARE MANUFACTURED WITH TAMPER-PROOF SPEEDOMETERS.WHEN A SPEEDOMETER IS REPLACED, THE NEW SPEEDOMETER WILL READ ZERO | |
| Bulletin Number: 09-034-18-3430 | |
| In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer's responsibility to co | |
| Bulletin Number: 09-034-18-3430a | |
| In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer's responsibility to co | |
| Bulletin Number: 09-035-17-3080 | |
| In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer?s responsibility to co | |
| Bulletin Number: 0903804 | |
| POWER SLIDING DOOR (PSD) DRIVE MODULE REMOVAL / INSTALLATION PROCEDURES. *TT | |
| Bulletin Number: 0904004 | |
| POWER SLIDING DOOR (PSD) SYSTEM SERVICE TIPS DUE TO INOPERATIVE OR IMPROPER POWER SLIDING DOOR (PSD) OPERATION. *TT | |
| Bulletin Number: MT-012-18 | |
| If a vehicle has body vibration or steering wheel shimmy while driving and the root cause is determined to be tire balance, re-balance the tires using a Hunter GSP9700 or equivalent balance machine. If your dealer does not have a GSP9700 or | |
| Bulletin Number: SA-013-19 | |
| MAZDA IDS INOPERATIVE WITH VCM-II LICENSE EXPIRATION MESSAGE - If you encounter an IDS inoperative problem with VCM-II license expiration message, follow the instructions below: 1. CLICK HERE to download the resetting tool to your PC deskto | |
| Bulletin Number: SA-061-17 | |
| In an effort to achieve a higher level of Customer Experience and retain the value of Mazda's vehicles, MNAO Warranty Operations is© 2017 Mazda North American Operations, U.S.A. allowing all Mazda dealers to utilize a third party, SPECMO En | |
| Bulletin Number: SA-068-17 | |
| STOPPER PLATES FOR AIR BAG MODULE CONNECTORS HAVE BEEN ESTABLISHED AS NEW SERVICE PARTS. When removing the connector (1) to the air bag module (2), make sure to first lift the stopper plate (3) carefully using a flathead screwdriver (but do | |
| Bulletin Number: SA327 | |
| TAKATA RECALLS GENERAL INFORMATION PURPOSE: THIS PAGE WAS CREATED TO ASSIST WITH HANDLING TAKATA AIR BAG RECALLS. PROCESSES: PLEASE USE THESE PROCESS FLOWCHARTS TO PROPERLY HANDLE VEHICLES SUBJECT TO THE TAKATA AIR BAG RECALL. RECALL 82 | |
| Bulletin Number: SB-08-001-13 | |
| MAZDA: INFORMATION PROVIDED REGARDING THE INDICATOR LIGHT ILLUMINATION OF THE PASSENGER AIRBAG DEACTIVATION (PAD). *PE | |
| Bulletin Number: SB-09-005-13 | |
| MAZDA: ON SOME VEHICLES, TO AVOID POTENTIAL INTERFERENCE OF FOOT PLACED ON PEDALS, INFORMATION IS PROVIDED REGARDING PROPER USE, AND PLACEMENT, OF DRIVER'S FLOOR MAT. VARIOUS MODELS AND MODEL YEARS. *PE | |
| 2005 MAZDA MX-5 | |
| Bulletin Number: 09-001/16 | |
| SUMMARY TO BE PROVIDED ON A FUTURE DATE. | |
| 2005 MAZDA RX-8 | |
| Bulletin Number: 00-001-13-2748 | |
| MAZDA HAS DEVELOPED FACTORY RECOMMENDED SCHEDULED MAINTENANCE SERVICES THAT SUPPORT ALL MAJOR VEHICLE SYSTEMS. MAZDA RECOMMENDS DEALERS FOLLOW THE SCHEDULED MAINTENANCE TABLES AS CITED IN THE VEHICLE-SPECIFIC WORKSHOP MANUAL OR OWNERS MANU | |
| Bulletin Number: 00-001-13-2748A | |
| MAZDA HAS DEVELOPED FACTORY RECOMMENDED SCHEDULED MAINTENANCE SERVICES THAT SUPPORT ALL MAJOR VEHICLE SYSTEMS. MAZDA RECOMMENDS DEALERS FOLLOW THE SCHEDULED MAINTENANCE TABLES AS CITED IN THE VEHICLE-SPECIFIC WORKSHOP MANUAL OR OWNERS MANU | |
| Bulletin Number: 00-001-18-3446 | |
| Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle-specific workshop manual or owner's manu | |
| Bulletin Number: 00-001-18-3446a | |
| Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle- specific workshop manual or owner's man | |
| Bulletin Number: 00-001-19-3560 | |
| Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle- specific workshop manual or owner's man | |
| Bulletin Number: 00-002-14-2936 | |
| MAZDA NORTH AMERICAN OPERATIONS RECEIVED MANY REQUESTS FROM OUR DEALERS ASKING US TO APPROVE ADDITIONAL ON-CAR BRAKE LATHES AS AN OPTION FOR MNAO AUTHORIZED EQUIPMENT. DUE TO YOUR FEEDBACK AND AFTER EVALUATING A FEW ON-CAR BRAKE LATHES, WE | |
| Bulletin Number: 00-002-19-3561 | |
| Mazda North American Operations has approved an additional on-car brake lathe as an option for MNAO authorized equipment. The Pro-Cut On-Car Brake Lathe has been added to the MNAO authorized equipment program. NOTE: Accu-turn is still an ap | |
| Bulletin Number: 00-003-18-3480 | |
| Mazda North American Operations has approved an additional on-car brake lathe as an option for MNAOauthorized equipment. The Pro-Cut On-Car Brake Lathe has been added to the MNAO authorizedequipment program.NOTE: Accu-turn is still an appro | |
| Bulletin Number: 00-003-18-3480a | |
| Mazda North American Operations has approved an additional on-car brake lathe as an option for MNAO authorized equipment. The Pro-Cut On-Car Brake Lathe has been added to the MNAO authorized equipment program. NOTE: Accu-turn is still an ap | |
| Bulletin Number: 00-003-19-3583 | |
| In support of the new MRT distribution, Mazda will ship to dealers a new Dual Purpose Diagnostic Leak Detector beginning March, 2019. Training videos will be posted to MGSS shortly and Workshop Manual procedures will be revised gradually. | |
| Bulletin Number: 00-004/12 | |
| SUMMARY TO BE PROVIDED ON A FUTURE DATE. | |
| Bulletin Number: 00-004-12-2741 | |
| MAZDA HAS DEVELOPED FACTORY RECOMMENDED SCHEDULED MAINTENANCE SERVICES THAT SUPPORT ALL MAJOR VEHICLE SYSTEMS. MAZDA RECOMMENDS DEALERS FOLLOW THE SCHEDULED MAINTENANCE TABLES AS CITED IN THE VEHICLE-SPECIFIC WORKSHOP MANUAL OR OWNERS MANU | |
| Bulletin Number: 00307 | |
| AVAILABILITY OF NON-REQUIRED TOOLS. *KB | |
| Bulletin Number: 01-001-19-3551 | |
| This service bulletin provides testing and charging procedures in order to promote proper battery maintenance, to deliver new vehicles with fully charged batteries, and to reduce unnecessary battery replacement cost. For new vehicles in sto | |
| Bulletin Number: 0100206 | |
| ENGINE MISFIRE DIAGNOSTIC PROCEDURES - SERVICE TIP. *TT | |
| Bulletin Number: 01-002-19-3552 | |
| The Mazda GR8-1291 is required for all warranty battery testing. If the Mazda GR8-1291 is not used, incorrect battery testing may result in unnecessary battery replacement. Use the following test procedures in this Service Bulletin to test | |
| Bulletin Number: 01-003-15-3014 | |
| USE THE FOLLOWING REPAIR PROCEDURE TO MINIMIZE THE NEED TO REPLACE THE CATALYST CONVERTER/EXHAUST PIPE WHEN REMOVING OXYGEN SENSORS AND/OR AIR FUEL RATIO SENSORS. | |
| Bulletin Number: 0100405 | |
| DIFFICULTY STARTING ENGINE CRANK. *TS | |
| Bulletin Number: 01-004-19-3558 | |
| On some vehicles, a sulfur smell or 'rotten egg' odor may be noticed coming from the exhaust system. The odor is usually noticed after a cold start, fast idle, extended periods of idling and full throttle acceleration. Sulfur smell is not a | |
| Bulletin Number: 0100704 | |
| A MALFUNCTION INDICATOR LAMP WITH DIAGNOSTIC TROUBLE CODE (DTC) P0300-0302 (MISFIRE) WHEN RUNNING, AFTER THE ENGINE HAS BEEN REPLACED. AFTER REPLACING THE ENGINE, THE ECCENTRIC SHAFT POSITION SENSOR WILL REMAIN IN THE PCM, CAUSING THE PCM | |
| Bulletin Number: 01-008-18-3451 | |
| This service bulletin provides testing and charging procedures in order to promote proper battery maintenance, to deliver new vehicles with fully charged batteries, and to reduce unnecessary battery replacement cost. For new vehicles in sto | |
| Bulletin Number: 01-009-18-3452 | |
| The Mazda GR8-1291 is required for all warranty battery testing. If the Mazda GR8-1291 is not used, incorrect battery testing may result in unnecessary battery replacement. Use the following test procedures in this Service Bulletin to test | |
| Bulletin Number: 0101104 | |
| ENGINE CRANKS NO START. *TT UPDATE. *TT | |
| Bulletin Number: 01012005 | |
| BATTERY REPLACEMENT SERVICE TIP. *TT | |
| Bulletin Number: 01012005 | |
| DIAGNOSTIC TROUBLE CODE P0336 (ECCENTRIC SHAFT POSITION SENSOR RANGE/PERFORMANCE) AT TIME OF ENGINE START. *TT | |
| Bulletin Number: 01012005 | |
| ENGINE STALLING AT IDLE, P0172 (FUEL TRIM TOO RICH) AFTER ENGINE REPLACEMENT, INTAKE MANIFOLD REMOVAL/REPLACEMENT, ENGINE HARNESS REMOVAL/REPLACEMENT OR FUEL INJECTOR REMOVAL/REPLACEMENT. *TT | |
| Bulletin Number: 01012005 | |
| SATELLITE ENABLED AUDIO UNITS. *TT | |
| Bulletin Number: 01012006 | |
| BROKEN REAR LICENSE PLATE ATTACHMENT. TO INCLUDE MAZDA RX-8 2006. *TT | |
| Bulletin Number: 01-013/08 | |
| MAZDA SPECIAL PROGRAM (MSP16) - ENGINE LACK OF POWER -PCM REFLASH. VEHICLES PRODUCED FROM APRIL 10, 2003 THROUGH NOV. 9, 2007. VIN RANGE JM1FE17**40100053 - 80215462. *NJ UPDATED 6/3/08. *NJ | |
| Bulletin Number: 01-014/08 | |
| ENGINE LACK OF POWER. *NJ | |
| Bulletin Number: 01-015/08 | |
| ENGINE CRANKS NO START. *NJ | |
| Bulletin Number: 0101607 | |
| IGNITION COIL INSPECTION. *KB | |
| Bulletin Number: 01-016-18-3522 | |
| On some vehicles, a sulfur smell or 'rotten egg' odor may be noticed coming from the exhaust system. The odor is usually noticed after a cold start, fast idle, extended periods of idling and full throttle acceleration. Sulfur smell is not a | |
| Bulletin Number: 01-019/08 | |
| SOME VEHICLES MAY EXPERIENCE A MIL WITH DTC P2070 (SSV STUCK OPEN). *NJ | |
| Bulletin Number: 0103105 | |
| FUEL DISTRIBUTOR INSULATOR-REMOVAL / INSTALLATION CAUTIONS-SERVICE TIP. *TS | |
| Bulletin Number: 0103906 | |
| MAZDA MODULAR DIAGNOSTIC SYSTEM (M-MDS) STEERING WHEEL ANGLE SENSOR MODULE SELF TEST SHOWS FAIL. *KB | |
| Bulletin Number: 0104204 | |
| BATTERY REPLACEMENT - SERVICE TIP. *TT | |
| Bulletin Number: 02-001-13-2752 | |
| SOME CUSTOMERS MAY COMPLAIN OF SIGNS OF OIL ON THE STRUTS OR SHOCK ABSORBERS. IN MOST CASES THE OIL THAT IS PRESENT IS NORMAL, AND A RESULT OF THE OIL THAT REMAINS ON THE SHAFT DURING THE NORMAL SWEEPING PROCESS OF THE SHAFT SEAL. FOLLOW TH | |
| Bulletin Number: 02-001-19-3550 | |
| Some customers may complain of signs of oil on the struts or shock absorbers. In most cases the oil that is present is normal, and a result of the oil that remains on the shaft during the normal sweeping process of the shaft seal. Follow th | |
| Bulletin Number: 02-002-16-3124 | |
| SOME AUTOMOTIVE CLEANING PRODUCTS CONTAIN STRONG ACID OR ALKALI. WHEN THESE TYPES OF CLEANERS ARE USED TO CLEAN THE WHEELS ON MAZDA VEHICLES, THE CHEMICALS CONTENTS PENETRATE THE CLEAR COATING OF THE WHEEL SURFACE AND DAMAGE THE PAINT UNDER | |
| Bulletin Number: 02-002-19-3546 | |
| Some automotive cleaning products contain strong acid or alkali. When these types of cleaners are used to clean the wheels on Mazda vehicles, the chemicals contents penetrate the clear coating of the wheel surface and damage the paint under | |
| Bulletin Number: 0200406 | |
| TPMS VALVE STEM BREAKS WHEN REMOVING AFTERMARKET VALVE STEM CAPS - SERVICE TIP. *TT | |
| Bulletin Number: 02-004-13-2770 | |
| SOME CUSTOMERS MAY COMPLAIN THAT THE STEERING WHEEL IS OFF CENTER MORE THAN 3┬░ EVEN WHEN DRIVING STRAIGHT ON A FLAT ROAD. | |
| Bulletin Number: 02-004-13-2770A | |
| SOME CUSTOMERS MAY COMPLAIN THAT THE STEERING WHEEL IS OFF CENTER MORE THAN 3┬░ EVEN WHEN DRIVING STRAIGHT ON A FLAT ROAD. | |
| Bulletin Number: 02-004-13-2770B | |
| SOME CUSTOMERS MAY COMPLAIN THAT THE STEERING WHEEL IS OFF CENTER MORE THAN 3┬░ EVEN WHEN DRIVING STRAIGHT ON A FLAT ROAD. | |
| Bulletin Number: 02-004-14 | |
| SUMMARY TO BE PROVIDED ON A FUTURE DATE. | |
| Bulletin Number: 02-004-14-2976 | |
| SOME CUSTOMERS MAY COMPLAIN THAT THE STEERING WHEEL IS OFF CENTER MORE THAN 3┬░ EVEN WHEN DRIVING STRAIGHT ON A FLAT ROAD. FOLLOW STEERING WHEEL ALIGNMENT PROCEDURE. | |
| Bulletin Number: 02-004-19-3574 | |
| Some customers may complain that the steering wheel is off center more than 3┬░ even when driving straight on a flat road. | |
| Bulletin Number: 02-005-08 | |
| MAZDA: NOISE FROM FRONT OF VEHICLE/STABILIZER CONTROL LINK BROKEN. THE PLASTIC INSERT CONNECTING THE STABILIZER CONTROL LINK BALL JOINT TO THE CONTROL LINK MAY CRACK AND BECOME SEPARATED. *PE UPDATED 3/19/09. *PE | |
| Bulletin Number: 02-006-18-3449 | |
| Some customers may complain of signs of oil on the struts or shock absorbers. In most cases the oil that is present is normal, and a result of the oil that remains on the shaft during the normal sweeping process of the shaft seal. Follow th | |
| Bulletin Number: 02-008-18-3467 | |
| Some automotive cleaning products contain strong acid or alkali. When these types of cleaners are used to clean the wheels on Mazda vehicles, the chemicals contents penetrate the clear coating of the wheel surface and damage the paint under | |
| Bulletin Number: 02-009-13-2854 | |
| Some automotive cleaning products contain strong acid or alkali. When these types of cleaners are used to clean the wheels on Mazda vehicles, the chemicals contents penetrate the clear coating of the wheel surface and damage the paint under | |
| Bulletin Number: 02-009-16-3155 | |
| SOME CUSTOMERS MAY COMPLAIN THAT THE STEERING WHEEL IS OFF CENTER MORE THAN 3┬░ EVEN WHEN DRIVING STRAIGHT ON A FLAT ROAD. | |
| Bulletin Number: 02-010-18-3477 | |
| Some customers may complain that the steering wheel is off center more than 3┬░ even when driving straight on a flat road. | |
| Bulletin Number: 04-001-19-3556 | |
| Some customers may report a slight clunk/bang/buzz noise or jolt from the front of the vehicle. This concern will most likely occur during the vehicles first forward movement after starting the engine. This is a normal operating noise of th | |
| Bulletin Number: 04-002-12 | |
| MAZDA: CLUNK/BANG NOISE DURING FIRST FORWARD MOVEMENT AFTER SITTING. THIS IS A NORMAL OPERATING NOISE OF THE ANTI-LOCK BRAKE SYSTEM (ABS). DO NOT ATTEMPT ANY REPAIRS. ALSO INCLUDED MODEL CX-5 YEAR 2013; MODEL CX-9 YEARS 2012-2013; MODEL MIA | |
| Bulletin Number: 04-002-14-2879 | |
| SOME CUSTOMERS MAY REPORT A SLIGHT CLUNK/BANG/BUZZ NOISE OR JOLT FROM THE FRONT OF THE VEHICLE. THIS CONCERN WILL MOST LIKELY OCCUR DURING THE VEHICLES FIRST FORWARD MOVEMENT AFTER STARTING THE ENGINE. THIS IS A NORMAL OPERATING NOISE OF TH | |
| Bulletin Number: 04-002-19-3545 | |
| Some vehicles exhibit brake related concerns such as brake noise, brake judder or brake dragging. If you encounter a customer complaint for any one of these symptoms, refer to the following information to understand why symptoms may occur, | |
| Bulletin Number: 04-003-18-3455 | |
| Some customers may report a slight clunk/bang/buzz noise or jolt from the front of the vehicle. This concern will most likely occur during the vehicles first forward movement after starting the engine. This is a normal operating noise of th | |
| Bulletin Number: 04-004-13-2853 | |
| Some vehicles exhibit brake related concerns such as brake noise, brake judder or brake dragging. If you encounter a customer complaint for any one of these symptoms, refer to the following information to understand why symptoms may occur, | |
| Bulletin Number: 04-004-14-2926 | |
| SOME VEHICLES EXHIBIT BRAKE RELATED CONCERNS SUCH AS BRAKE NOISE, BRAKE JUDDER OR BRAKE DRAGGING. IF YOU ENCOUNTER A CUSTOMER COMPLAINT FOR ANY ONE OF THESE SYMPTOMS, REFER TO THE FOLLOWING INFORMATION TO UNDERSTAND WHY SYMPTOMS MAY OCCUR, | |
| Bulletin Number: 04-004-16-3160 | |
| SOME VEHICLES EXHIBIT BRAKE RELATED CONCERNS SUCH AS BRAKE NOISE, BRAKE JUDDER OR BRAKE DRAGGING. IF YOU ENCOUNTER A CUSTOMER COMPLAINT FOR ANY ONE OF THESE SYMPTOMS, REFER TO THE FOLLOWING INFORMATION TO UNDERSTAND WHY SYMPTOMS MAY OCCUR, | |
| Bulletin Number: 04-004-18-3468 | |
| Some vehicles exhibit brake related concerns such as brake noise, brake judder or brake dragging. If you encounter a customer complaint for any one of these symptoms, refer to the following information to understand why symptoms may occur, | |
| Bulletin Number: 0500406 | |
| MANUAL TRANSMISSION-CLUTCH HARD TO DISENGAGE. *KB | |
| Bulletin Number: 08-001-13-2859 | |
| This information is provided to help address Passenger Airbag Deactivation (PAD) Indicator illumination con-cerns during vehicle service. | |
| Bulletin Number: 0800306 | |
| NON GENUINE ACCESSORIES AFFECT AIR BAG OPERATION. *KB | |
| Bulletin Number: 08-003-17-3345 | |
| Mazda Motor Corporation is going to evaluate the following inflators to ensure the safety of the inflator with a desiccant. In order to do this, MNAO is collecting inflators for evaluation in certain zones. For 2003-2008 Mazda6 (including M | |
| Bulletin Number: 0800805 | |
| AIRBAG WARNING LIGHT ILLUMINATED - DTC B1994 AND/OR B1998 SET. *TT | |
| Bulletin Number: 09-001-19-3553 | |
| When replacing the SiriusXM satellite radio unit (or a MAZDA CONNECT tuner and amp unit (TAU)) with replacement tuner for any reason, a call must be made to inform SiriusXM of the existing Radio ID and the new/replacement SAT Radio ID as so | |
| Bulletin Number: 09-002-19-3554 | |
| This service bulletin provides information regarding the proper use of the driver's floor mat to avoid anypotential interference with the foot pedals. The following are possible causes of floor mat interference,which can be avoided with pro | |
| Bulletin Number: 09-003-16-3130 | |
| SOME CUSTOMERS MAY COMPLAIN OF CONDENSATION/FOG INSIDE THE FRONT (HEADLAMP/HEADLIGHT) OR REAR (TAILLAMP/TAIL-LIGHT) COMBINATION LIGHTS. THE RECENT NEW MODELS HAVE BEEN FITTED WITH A CLEAR LENS WHICH CAN CAUSE THE SYMP-TOM TO BE MORE NOTICEA | |
| Bulletin Number: 09-003-19-3555 | |
| Some customers may complain of condensation/fog inside the front (headlamp/headlight) or rear (taillamp/taillight) combination lights. The recent new models have been fitted with a clear lens which can cause the symptom to be more noticeabl | |
| Bulletin Number: 09-003-19-3555a | |
| Some customers may complain of condensation/fog inside the front (headlamp/headlight) or rear (taillamp/taillight) combination lights. The recent new models have been fitted with a clear lens which can cause the symptom to be more noticeabl | |
| Bulletin Number: 09-004-19-3543 | |
| Mazda infotainment systems require contacting the proper source for diagnostic support, parts authorization, and parts exchange. Some components require prior authorization before ordering as exchange. Refer to DAG Exchange Central (MXConne | |
| Bulletin Number: 09-005-13-2781 | |
| THIS SERVICE BULLETIN PROVIDES INFORMATION REGARDING THE PROPER USE OF THE DRIVERS FLOOR MAT TO AVOID ANY POTEN-TIAL INTERFERENCE WITH THE FOOT PEDALS. THE FOLLOWING ARE POSSIBLE CAUSES OF FLOOR MAT INTERFERENCE, WHICH CAN BE AVOIDED WITH | |
| Bulletin Number: 09-005-19-3562 | |
| When encountering a vehicle with paint damage, refer to the "Mazda Pocket Paint Guide" to determine cause, prevention, remedy, and warranty coverage (if applicable). Copies of the Mazda Pocket Paint Guide are available for order on Mazda e- | |
| Bulletin Number: 09-007-14-2878 | |
| SOME CUSTOMERS MAY COMPLAIN OF CONDENSATION/FOG INSIDE THE FRONT OR REAR COMBINATION LIGHTS. THE RECENT NEW MODELS HAVE BEEN FITTED WITH A CLEAR LENS WHICH CAN CAUSE THE SYMPTOM TO BE MORE NOTICEABLE, HOWEVER, IT DOES NOT AFFECT THE PERFORM | |
| Bulletin Number: 0900807 | |
| HEADLIGHT AUTO-LEVELING MALFUNCTION INDICATOR LIGHT ILLUMINATES. *KB | |
| Bulletin Number: 09-008-17-3324 | |
| Take caution when cleaning plastic headlight lenses. Damage can occur when using some cleaners that contain strong acid, alkaline cleanser or organic solvent. Damage caused by using these cleaners is not covered by Mazda's New Vehicle Limit | |
| Bulletin Number: 09-009-19-3566 | |
| In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer's responsibility to co | |
| Bulletin Number: 0901005 | |
| RETRACTABLE KEY TRUNK RELEASE BUTTON - REVISED HOLD DOWN TIME SPECIFICATION - SERVICE TIP. *TT | |
| Bulletin Number: 09-011-18-3448 | |
| Some customers may complain of condensation/fog inside the front (headlamp/headlight) or rear (taillamp/taillight) combination lights. The recent new models have been fitted with a clear lens which can cause the symptom to be more noticeabl | |
| Bulletin Number: 09-012-14-2891 | |
| WHEN REPLACING THE SIRIUSXM SATELLITE RADIO UNIT (OR A MAZDA CONNECT TUNER AND AMP UNIT (TAU)) WITH REPLACEMENT TUNER FOR ANY REASON, A CALL MUST BE MADE TO INFORM SIRIUSXM OF THE EXISTING RADIO ID AND THE NEW/ REPLACEMENT SAT RADIO ID AS S | |
| Bulletin Number: 0901407 | |
| WATER IN REAR COMBINATION LIGHT. *KB | |
| Bulletin Number: 09-014-18-3443 | |
| When encountering a vehicle with paint damage, refer to the "Mazda Pocket Paint Guide" to determine cause, prevention, remedy, and warranty coverage (if applicable). | |
| Bulletin Number: 09-014-18-3443a | |
| When encountering a vehicle with paint damage, refer to the "Mazda Pocket Paint Guide" to determine cause, prevention, remedy, and warranty coverage (if applicable). Copies of the Mazda Pocket Paint Guide are available for order on Mazda e- | |
| Bulletin Number: 09-018-13-2803 | |
| SOME CUSTOMERS MAY COMPLAIN THAT THE AMBIENT TEMPERATURE DISPLAY IS NOT ACCURATE, OR IT TAKES TOO LONG FOR THE DISPLAY TO SHOW ACTUAL TEMPERATURE. WHEN YOU ENCOUNTER A CUSTOMER WITH THIS CONCERN, FIRST VERIFY THE CONDITION WHEN THE CUSTOMER | |
| Bulletin Number: 09018173351 | |
| Some customers may complain that the ambient temperature display is not accurate, or it takes too long for the display to show actual temperature. When you encounter a customer with this concern, first verify the condition when the customer | |
| Bulletin Number: 09-019-18-3450 | |
| This service bulletin provides information regarding the proper use of the driver's floor mat to avoid any potential interference with the foot pedals. The following are possible causes of floor mat interference, which can be avoided with p | |
| Bulletin Number: 09-023-14-2924 | |
| SOME CUSTOMERS MAY COMPLAIN THAT THE AMBIENT TEMPERATURE DISPLAY IS NOT ACCURATE, OR IT TAKES TOO LONG FOR THE DISPLAY TO SHOW ACTUAL TEMPERATURE.WHEN YOU ENCOUNTER A CUSTOMER WITH THIS CONCERN, FIRST VERIFY THE CONDITION WHEN THE CUSTOMER | |
| Bulletin Number: 09-023-18-3475 | |
| When replacing the SiriusXM satellite radio unit (or a MAZDA CONNECT tuner and amp unit (TAU)) with replacement tuner for any reason, a call must be made to inform SiriusXM of the existing Radio ID and the new/replacement SAT Radio ID as so | |
| Bulletin Number: 09-025-18-3479 | |
| Mazda infotainment systems require contacting the proper source for diagnostic support, parts authorization, and parts exchange. Some components require prior authorization before ordering as exchange. Refer to DAG Exchange Central (MXConne | |
| Bulletin Number: 09-027-14-2935 | |
| THIS SERVICE BULLETIN PROVIDES INFORMATION REGARDING THE PROPER USE OF THE DRIVERS FLOOR MAT TO AVOID ANY POTENTIAL INTERFERENCE WITH THE FOOT PEDALS. THE FOLLOWING ARE POSSIBLE CAUSES OF FLOOR MAT INTERFERENCE, WHICH CAN BE AVOIDED WITH P | |
| Bulletin Number: 09-028-12-2701B | |
| THE MULTI INFORMATION DISPLAY (MID) AND NAVIGATION SYSTEM SUPPORT FOR DIAGNOSTICS, PARTS AUTHORIZATION, AND PARTS EXCHANGE REQUIRE CONTACTING THE PROPER SOURCE. PLEASE CONTACT THE APPROPRIATE SOURCE BY REFERRING TO THE FOLLOWING TABLES. | |
| Bulletin Number: 09-030-15-3073 | |
| MAZDA INFOTAINMENT SYSTEMS REQUIRE CONTACTING THE PROPER SOURCE FOR DIAGNOSTIC SUPPORT, PARTS AUTHORIZATION, AND PARTS EXCHANGE. SOME COMPONENTS REQUIRE PRIOR AUTHORIZATION BEFORE ORDERING AS EXCHANGE. REFER TO DAG EXCHANGE CENTRAL (MXCONN | |
| Bulletin Number: 09-034-14-2956 | |
| IN ACCORDANCE WITH FEDERAL REGULATIONS, FOLLOW THE PROCEDURE LISTED BELOW WHEN REPLACING A SPEEDOMETER.NOTE:MAZDA VEHICLES ARE MANUFACTURED WITH TAMPER-PROOF SPEEDOMETERS.WHEN A SPEEDOMETER IS REPLACED, THE NEW SPEEDOMETER WILL READ ZERO | |
| Bulletin Number: 09-034-18-3430 | |
| In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer's responsibility to co | |
| Bulletin Number: 09-034-18-3430a | |
| In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer's responsibility to co | |
| Bulletin Number: 09-035-17-3080 | |
| In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer?s responsibility to co | |
| Bulletin Number: 09-039-13-2852 | |
| SOME VEHICLES MAY EXHIBIT A CHATTERING NOISE AND THE DRIVER-SIDE SEAT LIFT CANNOT BE ADJUSTED BECAUSE THE LOCK PLATE GUIDE COMES OFF THE GUIDE CAM WHEN OPERATING THE LIFT. IF THE LIFT LEVER IS THEN OPERATED WITH THE LOCK PLATE GUIDE OFF, TH | |
| Bulletin Number: 09-046-12-2744 | |
| SOME CUSTOMERS MAY COMPLAIN OF CONDENSATION/FOG INSIDE THE FRONT OR REAR COMBINATION LIGHTS. THE RECENT NEW MODELS HAVE BEEN FITTED WITH A CLEAR LENS WHICH CAN CAUSE THE SYMPTOM TO BE MORE NOTICEABLE, HOWEVER, IT DOES NOT AFFECT THE PERFORM | |
| Bulletin Number: 1066M | |
| SOME CUSTOMERS MAY COMPLAIN ABOUT IMPROPER OPERATION OF THE AUTO-DIMMING MIRROR. THIS MAY BE CAUSED BY AN OBSTRUCTION OF THE FRONT AND/OR REAR LIGHT SENSOR(S) (E.G. HANGING A PARKING PERMIT FROM THE MIRROR). USE A SOFT CLOTH WITH MILD DETER | |
| Bulletin Number: 1099M | |
| WHEN REPROGRAMMING A CONTROL MODULE, ALWAYS USE THE GR-8 BATTERY MANAGEMENT SYSTEM POWER SUPPLY MODE. IF NOT USED, THE CONTROL MODULE REPROGRAMMING MAY FAIL DUE TO A WEAK VEHICLE BATTERY.THE GR-8 BATTERY MANAGEMENT SYSTEM POWER SUPPLY MODE | |
| Bulletin Number: 11012005 | |
| P0442, P0455, P0456 SET IN POWERTRAIN CONTROL MODULE (PCM). LONG CRANKING TIME TO ENGINE START. *TT | |
| Bulletin Number: MT-003-18 | |
| The Workshop Manual has two-different airbag procedures, one for Standard Deployment and one for Two-Step Deployment. Standard Deployment is for Mexico spec vehicles and Two-Step Deployment is for US and Canadian spec vehicles. | |
| Bulletin Number: MT-012-18 | |
| If a vehicle has body vibration or steering wheel shimmy while driving and the root cause is determined to be tire balance, re-balance the tires using a Hunter GSP9700 or equivalent balance machine. If your dealer does not have a GSP9700 or | |
| Bulletin Number: MTI_1031 | |
| SOME CUSTOMERS MAY COMPLAIN ABOUT A BLURRY REAR VIEW MONITOR DISPLAY. THIS MAY BE CAUSED BY AN AFTERMARKET ACCESSORY DEVICE | |
| Bulletin Number: MTI_1031 | |
| SOME CUSTOMERS MAY COMPLAIN ABOUT A BLURRY REAR VIEW MONITOR DISPLAY. THIS MAY BE CAUSED BY AN AFTERMARKET ACCESSORY DEVICE. | |
| Bulletin Number: MTI_1032 | |
| SOME CUSTOMERS MAY COMPLAIN ABOUT A RATTLE TYPE NOISE COMING FROM THE REAR OF THE VEHICLE WHEN DRIVING ON ROUGH ROADS. THIS MAY BE CAUSED BY A LOOSE SPARE TIRE JACK. | |
| Bulletin Number: MTI_1034 | |
| THIS ARTICLE PROVIDES HVAC HEATER/DEFROSTER OPERATING TIPS USING MODE SELECTOR DIAL. THIS INCLUDES THE USE OF INTERMEDIATE POSITIONS. | |
| Bulletin Number: MTI_1111 | |
| WHEN INSTALLING A NAVIGATION SD CARD, CONFIRM THAT THE CARD IS UNLOCKED. ALSO, MAZDA DOES NOT RECOMMEND SWAPPING NAVIGATION SYSTEM SD CARDS FROM ONE VEHICLE TO ANOTHER FOR TESTING. IF SWAPPED, THE SD CARD THAT IS INSTALLED INTO THE OTHER VE | |
| Bulletin Number: RF-14-11 | |
| SUMMARY TO BE PROVIDED ON A FUTURE DATE. | |
| Bulletin Number: SA-013-19 | |
| MAZDA IDS INOPERATIVE WITH VCM-II LICENSE EXPIRATION MESSAGE - If you encounter an IDS inoperative problem with VCM-II license expiration message, follow the instructions below: 1. CLICK HERE to download the resetting tool to your PC deskto | |
| Bulletin Number: SA-061-17 | |
| In an effort to achieve a higher level of Customer Experience and retain the value of Mazda's vehicles, MNAO Warranty Operations is© 2017 Mazda North American Operations, U.S.A. allowing all Mazda dealers to utilize a third party, SPECMO En | |
| Bulletin Number: SA-068-17 | |
| STOPPER PLATES FOR AIR BAG MODULE CONNECTORS HAVE BEEN ESTABLISHED AS NEW SERVICE PARTS. When removing the connector (1) to the air bag module (2), make sure to first lift the stopper plate (3) carefully using a flathead screwdriver (but do | |
| Bulletin Number: SA234 | |
| IDS UPDATE 101.00 AND 101.02 IS NOW AVAILABLE ON MS3 UNDER THE "IDS/INFOTAINMENT" TAB. | |
| Bulletin Number: SA327 | |
| TAKATA RECALLS GENERAL INFORMATION PURPOSE: THIS PAGE WAS CREATED TO ASSIST WITH HANDLING TAKATA AIR BAG RECALLS. PROCESSES: PLEASE USE THESE PROCESS FLOWCHARTS TO PROPERLY HANDLE VEHICLES SUBJECT TO THE TAKATA AIR BAG RECALL. RECALL 82 | |
| Bulletin Number: SB-01-016-10 | |
| MAZDA: HESITATION/IDLE VIBRATION DUE TO CRACKED ENGINE MOUNT. ON SOME VEHICLES WITH MANUAL TRANSMISSION MAY EXPERIENCE DECELERATION IN 3RD GEAR WITH ENGINE SPEED LESS THAN 3000 RPM AT APPROX. 30 MPH (50KM/H), THEN QUICKLY DEPRESSING THE A | |
| Bulletin Number: SB-09-005-13 | |
| MAZDA: ON SOME VEHICLES, TO AVOID POTENTIAL INTERFERENCE OF FOOT PLACED ON PEDALS, INFORMATION IS PROVIDED REGARDING PROPER USE, AND PLACEMENT, OF DRIVER'S FLOOR MAT. VARIOUS MODELS AND MODEL YEARS. *PE | |
| Bulletin Number: SB-09-057-10 | |
| MAZDA: THERE IS CONDENSATION AND FOG IN THE FRONT AND REAR COMBINATION LIGHTS. *RM | |
| 2005 MAZDA TRIBUTE | |
| Bulletin Number: 00-001-13-2748 | |
| MAZDA HAS DEVELOPED FACTORY RECOMMENDED SCHEDULED MAINTENANCE SERVICES THAT SUPPORT ALL MAJOR VEHICLE SYSTEMS. MAZDA RECOMMENDS DEALERS FOLLOW THE SCHEDULED MAINTENANCE TABLES AS CITED IN THE VEHICLE-SPECIFIC WORKSHOP MANUAL OR OWNERS MANU | |
| Bulletin Number: 00-001-13-2748A | |
| MAZDA HAS DEVELOPED FACTORY RECOMMENDED SCHEDULED MAINTENANCE SERVICES THAT SUPPORT ALL MAJOR VEHICLE SYSTEMS. MAZDA RECOMMENDS DEALERS FOLLOW THE SCHEDULED MAINTENANCE TABLES AS CITED IN THE VEHICLE-SPECIFIC WORKSHOP MANUAL OR OWNERS MANU | |
| Bulletin Number: 00-001-18-3446 | |
| Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle-specific workshop manual or owner's manu | |
| Bulletin Number: 00-001-18-3446a | |
| Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle- specific workshop manual or owner's man | |
| Bulletin Number: 00-001-19-3560 | |
| Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle- specific workshop manual or owner's man | |
| Bulletin Number: 00-002-14-2936 | |
| MAZDA NORTH AMERICAN OPERATIONS RECEIVED MANY REQUESTS FROM OUR DEALERS ASKING US TO APPROVE ADDITIONAL ON-CAR BRAKE LATHES AS AN OPTION FOR MNAO AUTHORIZED EQUIPMENT. DUE TO YOUR FEEDBACK AND AFTER EVALUATING A FEW ON-CAR BRAKE LATHES, WE | |
| Bulletin Number: 00-002-19-3561 | |
| Mazda North American Operations has approved an additional on-car brake lathe as an option for MNAO authorized equipment. The Pro-Cut On-Car Brake Lathe has been added to the MNAO authorized equipment program. NOTE: Accu-turn is still an ap | |
| Bulletin Number: 00-003-18-3480 | |
| Mazda North American Operations has approved an additional on-car brake lathe as an option for MNAOauthorized equipment. The Pro-Cut On-Car Brake Lathe has been added to the MNAO authorizedequipment program.NOTE: Accu-turn is still an appro | |
| Bulletin Number: 00-003-18-3480a | |
| Mazda North American Operations has approved an additional on-car brake lathe as an option for MNAO authorized equipment. The Pro-Cut On-Car Brake Lathe has been added to the MNAO authorized equipment program. NOTE: Accu-turn is still an ap | |
| Bulletin Number: 00-003-19-3583 | |
| In support of the new MRT distribution, Mazda will ship to dealers a new Dual Purpose Diagnostic Leak Detector beginning March, 2019. Training videos will be posted to MGSS shortly and Workshop Manual procedures will be revised gradually. | |
| Bulletin Number: 00-004-12-2741 | |
| MAZDA HAS DEVELOPED FACTORY RECOMMENDED SCHEDULED MAINTENANCE SERVICES THAT SUPPORT ALL MAJOR VEHICLE SYSTEMS. MAZDA RECOMMENDS DEALERS FOLLOW THE SCHEDULED MAINTENANCE TABLES AS CITED IN THE VEHICLE-SPECIFIC WORKSHOP MANUAL OR OWNERS MANU | |
| Bulletin Number: 0004872 | |
| HESITATION/STUMBLE. *TT | |
| Bulletin Number: 00204 | |
| EVAPORATIVE EMMISSIONS AND RECIVER ADAPTERS. *EH | |
| Bulletin Number: 00307 | |
| AVAILABILITY OF NON-REQUIRED TOOLS. *KB | |
| Bulletin Number: 01-001-19-3551 | |
| This service bulletin provides testing and charging procedures in order to promote proper battery maintenance, to deliver new vehicles with fully charged batteries, and to reduce unnecessary battery replacement cost. For new vehicles in sto | |
| Bulletin Number: 01-002-19-3552 | |
| The Mazda GR8-1291 is required for all warranty battery testing. If the Mazda GR8-1291 is not used, incorrect battery testing may result in unnecessary battery replacement. Use the following test procedures in this Service Bulletin to test | |
| Bulletin Number: 0100303 | |
| FRONT CRANKSHAFT BOLT SERVICE WARNING. *TT | |
| Bulletin Number: 01-003-15-3014 | |
| USE THE FOLLOWING REPAIR PROCEDURE TO MINIMIZE THE NEED TO REPLACE THE CATALYST CONVERTER/EXHAUST PIPE WHEN REMOVING OXYGEN SENSORS AND/OR AIR FUEL RATIO SENSORS. | |
| Bulletin Number: 01-004-19-3558 | |
| On some vehicles, a sulfur smell or 'rotten egg' odor may be noticed coming from the exhaust system. The odor is usually noticed after a cold start, fast idle, extended periods of idling and full throttle acceleration. Sulfur smell is not a | |
| Bulletin Number: 0100605 | |
| ENGINE OVERHEATING AND / OR LOSS OF AIR CONDITIONING (A/C) PERFORMANCE. *TT | |
| Bulletin Number: 01-008-18-3451 | |
| This service bulletin provides testing and charging procedures in order to promote proper battery maintenance, to deliver new vehicles with fully charged batteries, and to reduce unnecessary battery replacement cost. For new vehicles in sto | |
| Bulletin Number: 01-009-18-3452 | |
| The Mazda GR8-1291 is required for all warranty battery testing. If the Mazda GR8-1291 is not used, incorrect battery testing may result in unnecessary battery replacement. Use the following test procedures in this Service Bulletin to test | |
| Bulletin Number: 01012004 | |
| SATELLITE RADIO (SAT) SOFTWARE. MAZDA M-TIPS. *TT | |
| Bulletin Number: 01012005 | |
| CONDENSATION IN FOG LAMPS, ESPECIALLY IN DAMP OR HUMID WEATHER. *TT | |
| Bulletin Number: 01012005 | |
| POOR GROUND MALFUNCTIONS. *TT | |
| Bulletin Number: 01012005 | |
| UNDERHOOD INSULATOR. *TT | |
| Bulletin Number: 0101307 | |
| NO START/LOSS OF ENGINE TIMINGS/SCRAPING NOISE AT CRANKSHAFT PULLEY/POSSIBLE ENGINE DAMAGE. *KB | |
| Bulletin Number: 0101505 | |
| FRONT CRANKSHAFT BOLT SERVICE WARNING. *MJ INCLUDING 2005 MAZDA B2300 AND 2005 MAZDA6. (UPDATE) *SC | |
| Bulletin Number: 0101505 | |
| FRONT CRANKSHAFT BOLT SERVICE WARNING. *SC | |
| Bulletin Number: 0101604 | |
| DIAGNOSTIC TIPS FOR TROUBLESHOOTING COIL-ON-PLUG MISFIRE CONCERNS. *TT THIS BULLETIN SUPERSEDES LAST ISSUED 5/3/04. *TT | |
| Bulletin Number: 01-016-18-3522 | |
| On some vehicles, a sulfur smell or 'rotten egg' odor may be noticed coming from the exhaust system. The odor is usually noticed after a cold start, fast idle, extended periods of idling and full throttle acceleration. Sulfur smell is not a | |
| Bulletin Number: 0102206 | |
| FRONT CRANKSHAFT BOLT SERVICE WARNING. *NJ | |
| Bulletin Number: 0102404 | |
| ENGINE OIL LEAK FROM DIPSTICK OR FRONT OR REAR CRANKSHAFT SEALS. *TT | |
| Bulletin Number: 0102504 | |
| BATTERY TEST PROCEDURE REQUIREMENTS. *TT | |
| Bulletin Number: 0102605 | |
| SLOW FUEL FILL OR FREQUENT FILLING STATION PUMP SHUT-OFF. *TT | |
| Bulletin Number: 0103004 | |
| GENERATOR WIRING ROUTING. *TT | |
| Bulletin Number: 0103407 | |
| SOME VEHICLES MAY EXHIBIT A SLOW FUEL FILL CONCERN DURING WINTER/FREEZING CONDITIONS, OR A MALFUNCTION INDICATOR LAMP (MIL) ON WITH DIAGNOSTIC TROUBLE CODE (DTC) P0451 PRESENT. MAY BE CAUSED BY WATER/MOISTURE ENTERING THE FUEL FILLER VENT | |
| Bulletin Number: 0200105 | |
| STEERING DRIFT / PULL - IMPROVED DIAGNOSTIC AND REPAIR PROCEDURE. *TT | |
| Bulletin Number: 02-001-13-2752 | |
| SOME CUSTOMERS MAY COMPLAIN OF SIGNS OF OIL ON THE STRUTS OR SHOCK ABSORBERS. IN MOST CASES THE OIL THAT IS PRESENT IS NORMAL, AND A RESULT OF THE OIL THAT REMAINS ON THE SHAFT DURING THE NORMAL SWEEPING PROCESS OF THE SHAFT SEAL. FOLLOW TH | |
| Bulletin Number: 02-001-19-3550 | |
| Some customers may complain of signs of oil on the struts or shock absorbers. In most cases the oil that is present is normal, and a result of the oil that remains on the shaft during the normal sweeping process of the shaft seal. Follow th | |
| Bulletin Number: 02-004-13-2770 | |
| SOME CUSTOMERS MAY COMPLAIN THAT THE STEERING WHEEL IS OFF CENTER MORE THAN 3┬░ EVEN WHEN DRIVING STRAIGHT ON A FLAT ROAD. | |
| Bulletin Number: 02-004-13-2770A | |
| SOME CUSTOMERS MAY COMPLAIN THAT THE STEERING WHEEL IS OFF CENTER MORE THAN 3┬░ EVEN WHEN DRIVING STRAIGHT ON A FLAT ROAD. | |
| Bulletin Number: 02-004-13-2770B | |
| SOME CUSTOMERS MAY COMPLAIN THAT THE STEERING WHEEL IS OFF CENTER MORE THAN 3┬░ EVEN WHEN DRIVING STRAIGHT ON A FLAT ROAD. | |
| Bulletin Number: 02-004-14 | |
| SUMMARY TO BE PROVIDED ON A FUTURE DATE. | |
| Bulletin Number: 02-004-19-3574 | |
| Some customers may complain that the steering wheel is off center more than 3┬░ even when driving straight on a flat road. | |
| Bulletin Number: 02-006-18-3449 | |
| Some customers may complain of signs of oil on the struts or shock absorbers. In most cases the oil that is present is normal, and a result of the oil that remains on the shaft during the normal sweeping process of the shaft seal. Follow th | |
| Bulletin Number: 02-009-16-3155 | |
| SOME CUSTOMERS MAY COMPLAIN THAT THE STEERING WHEEL IS OFF CENTER MORE THAN 3┬░ EVEN WHEN DRIVING STRAIGHT ON A FLAT ROAD. | |
| Bulletin Number: 02-010-18-3477 | |
| Some customers may complain that the steering wheel is off center more than 3┬░ even when driving straight on a flat road. | |
| Bulletin Number: 02062004 | |
| SELF-TEST PROCEDURE FOR SPEED CONTROL SYSTEM. *MR | |
| Bulletin Number: 03012005 | |
| SHIFT INTERLOCK MALFUNCTIONS. MAZDA REPAIR INFORMATION. *TT | |
| Bulletin Number: 0400405 | |
| REAR DISC BRAKE GRIND, RUBBING OR THUMP NOISE. *SC | |
| Bulletin Number: 0400804 | |
| WHEEL SPEED SENSOR REMOVAL TIP. *TT | |
| Bulletin Number: 0415 | |
| WINDSHIELD GLASS REPLACEMENT. PARTS FLASH. *TT | |
| Bulletin Number: 0424 | |
| OIL FILTER (REVISED) 2.3L - I4 ENGINE WAS OMITTED FROM THE EPC. *TT | |
| Bulletin Number: 05-001-16-3128 | |
| ALWAYS BE SURE TO USE THE CORRECT AUTOMATIC TRANSMISSION FLUID WHEN REPLACING ATF. USING THE WRONG ATF MAY CAUSE SHIFT QUALITY COMPLAINTS OR MAY EVEN DAMAGE THE TRANSMISSION.NOTE: ATF M-V (TYPE M5) IS NOT THE SAME FLUID AS MERCON®V OR MERC | |
| Bulletin Number: 05-001-18-3453 | |
| Always be sure to use the correct automatic transmission fluid when replacing ATF. Using the wrong ATF may cause shift quality complaints or may even damage the transmission. NOTE: ATF M-V (TYPE M5) IS NOT THE SAME FLUID AS MERCON®V OR MERC | |
| Bulletin Number: 05-002-13-2777 | |
| ALWAYS BE SURE TO USE THE CORRECT AUTOMATIC TRANSMISSION FLUID WHEN REPLACING ATF. USING THE WRONG ATF MAY CAUSE SHIFT QUALITY COMPLAINTS OR MAY EVEN DAMAGE THE TRANSMISSION.NOTE:ATF M-V (TYPE M5) IS NOT THE SAME FLUID AS MERCON®V OR MERCO | |
| Bulletin Number: 05-002-13-2777A | |
| ALWAYS BE SURE TO USE THE CORRECT AUTOMATIC TRANSMISSION FLUID WHEN REPLACING ATF. USING THE WRONG ATF MAY CAUSE SHIFT QUALITY COMPLAINTS OR MAY EVEN DAMAGE THE TRANSMISSION.NOTE:ATF M-V (TYPE M5) IS NOT THE SAME FLUID AS MERCON®V OR MERCO | |
| Bulletin Number: 0500407 | |
| ENGINE STALLS ON ENGAGEMENT/STOPPING. *KB | |
| Bulletin Number: 0500504 | |
| AUTOMATIC TRANSAXLE (A/T) INDICATOR LAMP ON (DIAGNOSTIC TROUBLE CODE P1783 AND/OR P0733) OR COLD CLIMATE SHIFT / ENGAGEMENT CONCERNS. UPDATE. *TT | |
| Bulletin Number: 0500706 | |
| MERCON ATF IS BEING REPLACED BY MERCON V AS A SERVICE FLUID. *KB | |
| Bulletin Number: 0529 | |
| FRONT OUTER DOOR HANDLE REINFORCEMENT HAS BEEN REDESIGNED. *TS | |
| Bulletin Number: 0536 | |
| SEAT TRACK POWER UNIT. *TS | |
| Bulletin Number: 06012004 | |
| POP/SNAP NOISE WHILE DRIVING. *JB | |
| Bulletin Number: 06012004 | |
| SETTING THE CLOCK DISPLAY TO 12- HOUR TIME. *JB | |
| Bulletin Number: 06012004 | |
| SIRIUS RADIO ID (ESN) NUMBER. *JB | |
| Bulletin Number: 06012004 | |
| SIRIUS SATELLITE RADIO (SAT) *JB | |
| Bulletin Number: 0800306 | |
| NON GENUINE ACCESSORIES AFFECT AIR BAG OPERATION. *KB | |
| Bulletin Number: 0800405 | |
| SAFETY BELT RETRACTS TOO SLOWLY. MAZDA INCLUDING 2006 B-SERIES TRUCKS. *SC | |
| Bulletin Number: 08062004 | |
| DEALER NOTICE - SERVICE BULLETIN RELEASE 8/6/2004. *TT | |
| Bulletin Number: 08112004 | |
| DEALER NOTICE - SERVICE BULLETIN RELEASE 8/11/2004. *TT | |
| Bulletin Number: 0900104 | |
| PORT OR DEALER INSTALLED AUTO-DIMMING (ELECTRO-CHROMIC) MIRROR, WITH ELECTRONIC COMPASS, AMBIENT TEMPERATURE. *MR | |
| Bulletin Number: 09-002-19-3554 | |
| This service bulletin provides information regarding the proper use of the driver's floor mat to avoid anypotential interference with the foot pedals. The following are possible causes of floor mat interference,which can be avoided with pro | |
| Bulletin Number: 09-004-19-3543 | |
| Mazda infotainment systems require contacting the proper source for diagnostic support, parts authorization, and parts exchange. Some components require prior authorization before ordering as exchange. Refer to DAG Exchange Central (MXConne | |
| Bulletin Number: 09-005-13-2781 | |
| THIS SERVICE BULLETIN PROVIDES INFORMATION REGARDING THE PROPER USE OF THE DRIVERS FLOOR MAT TO AVOID ANY POTEN-TIAL INTERFERENCE WITH THE FOOT PEDALS. THE FOLLOWING ARE POSSIBLE CAUSES OF FLOOR MAT INTERFERENCE, WHICH CAN BE AVOIDED WITH | |
| Bulletin Number: 09-005-19-3562 | |
| When encountering a vehicle with paint damage, refer to the "Mazda Pocket Paint Guide" to determine cause, prevention, remedy, and warranty coverage (if applicable). Copies of the Mazda Pocket Paint Guide are available for order on Mazda e- | |
| Bulletin Number: 09-009-19-3566 | |
| In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer's responsibility to co | |
| Bulletin Number: 090104 | |
| A/C COMPRESSOR CUT-OFF LOGIC. *JB | |
| Bulletin Number: 090104 | |
| UNDERHOOD PAINT PROCESS CHANGE. *JB | |
| Bulletin Number: 09-014-18-3443 | |
| When encountering a vehicle with paint damage, refer to the "Mazda Pocket Paint Guide" to determine cause, prevention, remedy, and warranty coverage (if applicable). | |
| Bulletin Number: 09-014-18-3443a | |
| When encountering a vehicle with paint damage, refer to the "Mazda Pocket Paint Guide" to determine cause, prevention, remedy, and warranty coverage (if applicable). Copies of the Mazda Pocket Paint Guide are available for order on Mazda e- | |
| Bulletin Number: 0901703 | |
| ELECTRICAL - WIRING - SOLDERING AND CRIMPING REPAIRS - SERVICE TIP. *TT | |
| Bulletin Number: 09-019-18-3450 | |
| This service bulletin provides information regarding the proper use of the driver's floor mat to avoid any potential interference with the foot pedals. The following are possible causes of floor mat interference, which can be avoided with p | |
| Bulletin Number: 0902503 | |
| SERVICE WIRING HARNESS REPLACEMENT GUIDELINES - SERVICE TIPS - ELECTRICAL. *TT THIS BULLETIN REPLACES PREVIOUS BULLETIN 09-025-03 DATED 12/1/2003. *TT | |
| Bulletin Number: 09-025-18-3479 | |
| Mazda infotainment systems require contacting the proper source for diagnostic support, parts authorization, and parts exchange. Some components require prior authorization before ordering as exchange. Refer to DAG Exchange Central (MXConne | |
| Bulletin Number: 0902604 | |
| SPEEDOMETER REPLACEMENT PROCEDURE. *TT | |
| Bulletin Number: 09-027-14-2935 | |
| THIS SERVICE BULLETIN PROVIDES INFORMATION REGARDING THE PROPER USE OF THE DRIVERS FLOOR MAT TO AVOID ANY POTENTIAL INTERFERENCE WITH THE FOOT PEDALS. THE FOLLOWING ARE POSSIBLE CAUSES OF FLOOR MAT INTERFERENCE, WHICH CAN BE AVOIDED WITH P | |
| Bulletin Number: 09-029-18-3497 | |
| In the event that all vehicle keys are lost and the vehicle key code is not available on the Vehicle Retail Data Inquiry system, replacement keys may only be acquired by obtaining the key code using the Repair Procedure below. Mazda recomme | |
| Bulletin Number: 09-030-15-3073 | |
| MAZDA INFOTAINMENT SYSTEMS REQUIRE CONTACTING THE PROPER SOURCE FOR DIAGNOSTIC SUPPORT, PARTS AUTHORIZATION, AND PARTS EXCHANGE. SOME COMPONENTS REQUIRE PRIOR AUTHORIZATION BEFORE ORDERING AS EXCHANGE. REFER TO DAG EXCHANGE CENTRAL (MXCONN | |
| Bulletin Number: 09-034-14-2956 | |
| IN ACCORDANCE WITH FEDERAL REGULATIONS, FOLLOW THE PROCEDURE LISTED BELOW WHEN REPLACING A SPEEDOMETER.NOTE:MAZDA VEHICLES ARE MANUFACTURED WITH TAMPER-PROOF SPEEDOMETERS.WHEN A SPEEDOMETER IS REPLACED, THE NEW SPEEDOMETER WILL READ ZERO | |
| Bulletin Number: 09-034-18-3430 | |
| In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer's responsibility to co | |
| Bulletin Number: 09-034-18-3430a | |
| In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer's responsibility to co | |
| Bulletin Number: 09-035-17-3080 | |
| In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer?s responsibility to co | |
| Bulletin Number: 4006D | |
| NOTIFICATION OF HEADLINER COMPLIANCE RECALL 4006D. THE ENERGY ABSORBING MATERIAL LOCATED ABOVE THE FORWARD CORNERS OF THE INTERIOR HEADLINER MAY NOT ABSORB SUFFICIENT ENERGY TO CONFORM TO REGULATORY REQUIREMENTS. *TT | |
| Bulletin Number: MT-012-18 | |
| If a vehicle has body vibration or steering wheel shimmy while driving and the root cause is determined to be tire balance, re-balance the tires using a Hunter GSP9700 or equivalent balance machine. If your dealer does not have a GSP9700 or | |
| Bulletin Number: SA-013-19 | |
| MAZDA IDS INOPERATIVE WITH VCM-II LICENSE EXPIRATION MESSAGE - If you encounter an IDS inoperative problem with VCM-II license expiration message, follow the instructions below: 1. CLICK HERE to download the resetting tool to your PC deskto | |
| Bulletin Number: SA-061-17 | |
| In an effort to achieve a higher level of Customer Experience and retain the value of Mazda's vehicles, MNAO Warranty Operations is© 2017 Mazda North American Operations, U.S.A. allowing all Mazda dealers to utilize a third party, SPECMO En | |
| Bulletin Number: SB-05-003-11 | |
| MAZDA: THE ENGINE IS STALLING WHEN STOPPING OR ENGAGING INTO DRIVE OR REVERSE. IT MAY BE INTERMITTENT AND USUALLY OCCURS ON LONG DRIVES. IT MAY BE CAUSED BY INTERNAL WEAR OF THE TORQUE CONVERTER. *RM | |
| Bulletin Number: SB-09-005-13 | |
| MAZDA: ON SOME VEHICLES, TO AVOID POTENTIAL INTERFERENCE OF FOOT PLACED ON PEDALS, INFORMATION IS PROVIDED REGARDING PROPER USE, AND PLACEMENT, OF DRIVER'S FLOOR MAT. VARIOUS MODELS AND MODEL YEARS. *PE | |
Recalls for 2005 Mazda
| 2005 MAZDA B-SERIES TRUCK | |
|---|---|
| NHTSA Campaign ID: | AIR BAGS:FRONTAL:DRIVER SIDE INFLATOR MODULE |
| Manufacturer: | Mazda North American Operations |
| Manufacture Dates: | 04/17/2003 - 05/02/2006 |
| Potential Units Affected: | 17576 |
Defect Description:Mazda North American Operations (Mazda) is recalling certain 2004-2006 B-Series trucks. Upon deployment of the driver side frontal air bag, excessive internal pressure may cause the inflator to rupture. Consequence:In the event of a crash necessitating deployment of the driver's frontal air bag, the inflator could rupture with metal fragments striking the vehicle occupants potentially resulting in serious injury or death. Action:Mazda will notify owners, and dealers will replace the driver's frontal air bag inflator with an alternate inflator, free of charge. The recall began on January 17, 2018. Owners may contact Mazda customer service at 1-800-222-5500. Mazda's number for this recall is 1917L. Note: This recall supersedes recall 16V-048. Vehicles that received a replacement air bag inflator under the previous campaign need to return to a dealer to have an alternate inflator installed. | |
| 2005 MAZDA B-SERIES TRUCK | |
|---|---|
| NHTSA Campaign ID: | AIR BAGS:PASSENGER SIDE FRONTAL |
| Manufacturer: | Mazda North American Operations |
| Manufacture Dates: | 04/17/2003 - 05/02/2006 |
| Potential Units Affected: | 17576 |
Defect Description:Mazda North American Operations (Mazda) is recalling certain 2004-2006 Mazda B-series trucks. Upon deployment of the passenger side frontal air bag, excessive internal pressure may cause the inflator to rupture. Consequence:In the event of a crash necessitating deployment of the passenger's frontal air bag, the inflator could rupture with metal fragments striking the vehicle occupants, potentially resulting in serious injury or death. Action:Mazda will notify owners, and dealers will replace the passenger side frontal air bag inflator with an alternate inflator, free of charge. The recall began on January 17, 2018. Owners may contact Mazda customer service at 1-800-222-5500. Mazda's number for this recall is 1817L. Note: This recall supersedes recall 15V-346. Vehicles that received a replacement air bag inflator under the previous campaign need to return to a dealer to have an alternate inflator installed. | |
| 2005 MAZDA MAZDA3 | |
|---|---|
| NHTSA Campaign ID: | AIR BAGS:FRONTAL:SENSOR/CONTROL MODULE |
| Manufacturer: | MAZDA NORTH AMERICAN OPERATIONS |
| Manufacture Dates: | 08/24/2004 - 08/25/2004 |
| Potential Units Affected: | 2 |
Defect Description:ON TWO PASSENGER VEHICLES, A CRACK IN THE SOLDER CONNECTION ATTACHING THE ACCELERATION SENSOR IN THE SAS UNIT MADE CONTACT WITH THE BASE PLATE, DAMAGING THE SOLDER CONNECTION. Consequence:THE AIRBAG MAY NOT DEPLOY WHEN THE VEHICLE IS INVOLVED IN A FRONTAL CRASH AND IT CAN CAUSE SERIOUS INJURIES. Action:DEALERS REPAIRED THESE VEHICLES. THE TWO VEHICLE OWNERS WERE CONTACTED BY TELEPHONE ON NOVEMBER 22, 2004, AND THESE VEHICLES HAVE BEEN REPAIRED. | |
| 2005 MAZDA MAZDA6 | |
|---|---|
| NHTSA Campaign ID: | AIR BAGS:PASSENGER SIDE FRONTAL |
| Manufacturer: | Mazda North American Operations |
| Manufacture Dates: | 05/29/2002 - 05/05/2008 |
| Potential Units Affected: | 308591 |
Defect Description:Mazda North America Operations (Mazda) is recalling certain 2003-2008 Mazda6, 2006-2007 Mazdaspeed6 and 2004 MPV vehicles nationwide. Mazda is also recalling 2005-2006 MPV vehicles in Alabama, Arizona, Arkansas, California, Delaware, the District of Columbia, Florida, Georgia, Hawaii, Illinois, Indiana, Kansas, Kentucky, Louisiana, Maryland, Mississippi, Missouri, Nebraska, Nevada, New Jersey, New Mexico, North Carolina, Ohio, Oklahoma, Pennsylvania, South Carolina, Tennessee, Texas, Virginia, West Virginia, Puerto Rico, American Samoa, Guam, the Northern Mariana Islands (Saipan), and the U.S. Virgin Islands. On July 9, 2019 this recall was expanded to include certain 2004-2011 RX-8 vehicles that were previously recalled under 16V-354 but have not yet been repaired. These vehicles are equipped with certain air bag inflators assembled as part of the passenger frontal air bag modules, and used as original equipment or replacement equipment. In the event of a crash necessitating deployment of the passenger frontal air bag, these passenger air bag inflators may explode due to propellant degradation occurring after long-term exposure to absolute humidity and temperature cycling. Consequence:An inflator explosion may result in sharp metal fragments striking the driver or other occupants resulting in serious injury or death. Action:Mazda will notify owners, and dealers will replace the front passenger air bag inflator with an alternate inflator, free of charge. The recall began July 6, 2018. Mailing to the affected RX-8 owners began July 6, 2019. Owners may contact Mazda customer service at 1-800-222-5500, option 4. Mazda's number for this recall is 2618F. Note: With the addition of the RX-8 vehicles, this recall fully supersedes recall 16V354. | |
| 2005 MAZDA MAZDA6 | |
|---|---|
| NHTSA Campaign ID: | AIR BAGS:FRONTAL:DRIVER SIDE INFLATOR MODULE |
| Manufacturer: | Mazda North American Operations |
| Manufacture Dates: | 05/29/2002 - 05/05/2008 |
| Potential Units Affected: | 308992 |
Defect Description:Mazda North American Operations (Mazda) is recalling certain model year 2003-2008 Mazda6, 2004-2008 RX-8, and 2006-2007 Mazdaspeed6 vehicles. The affected vehicles are equipped with a dual-stage driver frontal air bag that may be susceptible to moisture intrusion and other factors, including manufacturing variability that, over time, could cause the inflator to rupture. Consequence:In the event of a crash necessitating deployment of the driver's frontal air bag, the inflator could rupture with metal fragments striking the driver or other occupants resulting in serious injury or death. Action:Mazda will notify owners, and dealers will replace the driver's frontal air bag inflator with an alternate inflator, free of charge. The recall began on September 12, 2017. Owners may contact Mazda customer service at 1-800-222-5500. Mazda's number for this recall is 1417G. Note: This recall supersedes recall 15V-382. | |
| 2005 MAZDA MPV | |
|---|---|
| NHTSA Campaign ID: | AIR BAGS:PASSENGER SIDE FRONTAL |
| Manufacturer: | Mazda North American Operations |
| Manufacture Dates: | 08/21/2002 - 04/28/2008 |
| Potential Units Affected: | 308591 |
Defect Description:Mazda North America Operations (Mazda) is recalling certain 2003-2008 Mazda6, 2006-2007 Mazdaspeed6 and 2004 MPV vehicles nationwide. Mazda is also recalling 2005-2006 MPV vehicles in Alabama, Arizona, Arkansas, California, Delaware, the District of Columbia, Florida, Georgia, Hawaii, Illinois, Indiana, Kansas, Kentucky, Louisiana, Maryland, Mississippi, Missouri, Nebraska, Nevada, New Jersey, New Mexico, North Carolina, Ohio, Oklahoma, Pennsylvania, South Carolina, Tennessee, Texas, Virginia, West Virginia, Puerto Rico, American Samoa, Guam, the Northern Mariana Islands (Saipan), and the U.S. Virgin Islands. On July 9, 2019 this recall was expanded to include certain 2004-2011 RX-8 vehicles that were previously recalled under 16V-354 but have not yet been repaired. These vehicles are equipped with certain air bag inflators assembled as part of the passenger frontal air bag modules, and used as original equipment or replacement equipment. In the event of a crash necessitating deployment of the passenger frontal air bag, these passenger air bag inflators may explode due to propellant degradation occurring after long-term exposure to absolute humidity and temperature cycling. Consequence:An inflator explosion may result in sharp metal fragments striking the driver or other occupants resulting in serious injury or death. Action:Mazda will notify owners, and dealers will replace the front passenger air bag inflator with an alternate inflator, free of charge. The recall began July 6, 2018. Mailing to the affected RX-8 owners began July 6, 2019. Owners may contact Mazda customer service at 1-800-222-5500, option 4. Mazda's number for this recall is 2618F. Note: With the addition of the RX-8 vehicles, this recall fully supersedes recall 16V354. | |
| 2005 MAZDA MPV | |
|---|---|
| NHTSA Campaign ID: | AIR BAGS:PASSENGER SIDE FRONTAL |
| Manufacturer: | Mazda North American Operations |
| Manufacture Dates: | 08/02/2004 - 04/28/2006 |
| Potential Units Affected: | 4184 |
Defect Description:Mazda North America Operations (Mazda) is recalling certain 2005-2006 Mazda MPV vehicles sold, or ever registered, in the states of Alaska, Colorado, Connecticut, Idaho, Iowa, Maine, Massachusetts, Michigan, Minnesota, Montana, New Hampshire, New York, North Dakota, Oregon, Rhode Island, South Dakota, Utah, Vermont, Washington, Wisconsin, and Wyoming. On July 9, 2019 this recall was expanded to include certain 2005-2009 RX-8 vehicles that were previously recalled under 17V-011 but have not yet been repaired. These vehicles are equipped with certain air bag inflators assembled as part of the passenger frontal air bag modules used as original equipment or replacement equipment. In the event of a crash necessitating deployment of the passenger frontal air bag, these inflators may explode due to propellant degradation occurring after long-term exposure to absolute humidity and temperature cycling. Consequence:An inflator explosion may result in metal fragments striking the vehicle occupants resulting in serious injury or death. Action:Mazda will notify owners, and dealers will replace the front passenger air bag inflator with an alternate inflator, free of charge. The recall began July 6, 2018 for MPV vehicles. The recall began July 9, 2019 for RX-8 vehicles. Owners may contact Mazda customer service at 1-800-222-5500, option 4. Mazda's number for this recall is 2618F. Note: With the addition of the RX-8 vehicles, this recall fully supersedes recall 17V-011. | |
| 2005 MAZDA RX-8 | |
|---|---|
| NHTSA Campaign ID: | AIR BAGS:PASSENGER SIDE FRONTAL |
| Manufacturer: | Mazda North American Operations |
| Manufacture Dates: | 04/10/2003 - 05/16/2011 |
| Potential Units Affected: | 308591 |
Defect Description:Mazda North America Operations (Mazda) is recalling certain 2003-2008 Mazda6, 2006-2007 Mazdaspeed6 and 2004 MPV vehicles nationwide. Mazda is also recalling 2005-2006 MPV vehicles in Alabama, Arizona, Arkansas, California, Delaware, the District of Columbia, Florida, Georgia, Hawaii, Illinois, Indiana, Kansas, Kentucky, Louisiana, Maryland, Mississippi, Missouri, Nebraska, Nevada, New Jersey, New Mexico, North Carolina, Ohio, Oklahoma, Pennsylvania, South Carolina, Tennessee, Texas, Virginia, West Virginia, Puerto Rico, American Samoa, Guam, the Northern Mariana Islands (Saipan), and the U.S. Virgin Islands. On July 9, 2019 this recall was expanded to include certain 2004-2011 RX-8 vehicles that were previously recalled under 16V-354 but have not yet been repaired. These vehicles are equipped with certain air bag inflators assembled as part of the passenger frontal air bag modules, and used as original equipment or replacement equipment. In the event of a crash necessitating deployment of the passenger frontal air bag, these passenger air bag inflators may explode due to propellant degradation occurring after long-term exposure to absolute humidity and temperature cycling. Consequence:An inflator explosion may result in sharp metal fragments striking the driver or other occupants resulting in serious injury or death. Action:Mazda will notify owners, and dealers will replace the front passenger air bag inflator with an alternate inflator, free of charge. The recall began July 6, 2018. Mailing to the affected RX-8 owners began July 6, 2019. Owners may contact Mazda customer service at 1-800-222-5500, option 4. Mazda's number for this recall is 2618F. Note: With the addition of the RX-8 vehicles, this recall fully supersedes recall 16V354. | |
| 2005 MAZDA RX-8 | |
|---|---|
| NHTSA Campaign ID: | ENGINE AND ENGINE COOLING |
| Manufacturer: | MAZDA NORTH AMERICAN OPERATIONS |
| Manufacture Dates: | 04/10/2003 - 07/07/2005 |
| Potential Units Affected: | 52000 |
Defect Description:IF CERTAIN PASSENGER VEHICLES ARE PARKED AND THE ENGINE IS OPERATED AT HIGH RPM'S FOR AN EXCESSIVE LENGTH OF TIME, SOME OF THE PARTS AROUND THE EXHAUST SYSTEM CAN MELT AND PRODUCE A VARIETY OF MALFUNCTIONS. PROBLEMS CAUSED BY THE EXCESSIVE HEAT BUILD-UP CAN RANGE FROM INOPERATIVE OXYGEN SENSOR, NEUTRAL SWITCH AND BACK UP LIGHTS, PROBLEMS WITH THE PARKING BRAKES, MALFUNCTIONS OF THE GAS GAUGE AND/OR POSSIBLE FUEL LEAKS RESULTING FROM HEAT DAMAGE TO THE FUEL TANK. Consequence:FUEL LEAKAGE, IN THE PRESENCE OF AN IGNITION SOURCE, COULD RESULT IN A FIRE. Action:DEALERS WILL INSPECT AND REPLACE PARTS. THE RECALL BEGAN ON AUGUST 30, 2005. OWNERS MAY CONTACT MAZDA AT 1-800-222-5500. | |
| 2005 MAZDA RX-8 | |
|---|---|
| NHTSA Campaign ID: | FUEL SYSTEM, GASOLINE:DELIVERY:FUEL PUMP |
| Manufacturer: | Mazda North American Operations |
| Manufacture Dates: | 04/10/2003 - 02/18/2008 |
| Potential Units Affected: | 69447 |
Defect Description:Mazda North America Operations (Mazda) is recalling certain model year 2004-2008 RX-8 vehicles. Heat from the engine and the exhaust may cause the main fuel pump pipe to crack. Consequence:If the fuel pump pipe cracks, fuel may leak, increasing the risk of a fire. Action:Mazda will notify owners, and dealers will replace the fuel pump filter kit, free of charge. The recall began on July 31, 2017. Owners may contact Mazda customer service at 1-800-222-5500. Mazda's number for this recall is 1017E. | |
| 2005 MAZDA RX-8 | |
|---|---|
| NHTSA Campaign ID: | FUEL SYSTEM, GASOLINE:DELIVERY:FUEL PUMP |
| Manufacturer: | Mazda North American Operations |
| Manufacture Dates: | 04/10/2003 - 02/08/2008 |
| Potential Units Affected: | 69447 |
Defect Description:Mazda North America Operations (Mazda) is recalling certain model year 2004-2008 RX-8 vehicles manufactured April 10, 2003, to February 18, 2008. The affected vehicles have fuel pump sealing rings that may deteriorate due to exposure to heat from the engine or exhaust pipe. Consequence:The deteriorated seals may leak fuel, which, in the presence of an ignition source, can increase the risk of a fire. Action:Mazda will notify owners, and dealers will replace the fuel pump sealing ring set and add a thermal insulation pad to the fuel tank, free of charge. The recall began July 31, 2017. Owners may contact Mazda customer service at 1-800-222-5500. Mazda's number for this recall is 0516J. | |
| 2005 MAZDA RX-8 | |
|---|---|
| NHTSA Campaign ID: | AIR BAGS:FRONTAL:DRIVER SIDE INFLATOR MODULE |
| Manufacturer: | Mazda North American Operations |
| Manufacture Dates: | 04/10/2003 - 02/18/2008 |
| Potential Units Affected: | 308992 |
Defect Description:Mazda North American Operations (Mazda) is recalling certain model year 2003-2008 Mazda6, 2004-2008 RX-8, and 2006-2007 Mazdaspeed6 vehicles. The affected vehicles are equipped with a dual-stage driver frontal air bag that may be susceptible to moisture intrusion and other factors, including manufacturing variability that, over time, could cause the inflator to rupture. Consequence:In the event of a crash necessitating deployment of the driver's frontal air bag, the inflator could rupture with metal fragments striking the driver or other occupants resulting in serious injury or death. Action:Mazda will notify owners, and dealers will replace the driver's frontal air bag inflator with an alternate inflator, free of charge. The recall began on September 12, 2017. Owners may contact Mazda customer service at 1-800-222-5500. Mazda's number for this recall is 1417G. Note: This recall supersedes recall 15V-382. | |
| 2005 MAZDA RX-8 | |
|---|---|
| NHTSA Campaign ID: | AIR BAGS:PASSENGER SIDE FRONTAL |
| Manufacturer: | Mazda North American Operations |
| Manufacture Dates: | 07/01/2004 - 03/31/2009 |
| Potential Units Affected: | 4184 |
Defect Description:Mazda North America Operations (Mazda) is recalling certain 2005-2006 Mazda MPV vehicles sold, or ever registered, in the states of Alaska, Colorado, Connecticut, Idaho, Iowa, Maine, Massachusetts, Michigan, Minnesota, Montana, New Hampshire, New York, North Dakota, Oregon, Rhode Island, South Dakota, Utah, Vermont, Washington, Wisconsin, and Wyoming. On July 9, 2019 this recall was expanded to include certain 2005-2009 RX-8 vehicles that were previously recalled under 17V-011 but have not yet been repaired. These vehicles are equipped with certain air bag inflators assembled as part of the passenger frontal air bag modules used as original equipment or replacement equipment. In the event of a crash necessitating deployment of the passenger frontal air bag, these inflators may explode due to propellant degradation occurring after long-term exposure to absolute humidity and temperature cycling. Consequence:An inflator explosion may result in metal fragments striking the vehicle occupants resulting in serious injury or death. Action:Mazda will notify owners, and dealers will replace the front passenger air bag inflator with an alternate inflator, free of charge. The recall began July 6, 2018 for MPV vehicles. The recall began July 9, 2019 for RX-8 vehicles. Owners may contact Mazda customer service at 1-800-222-5500, option 4. Mazda's number for this recall is 2618F. Note: With the addition of the RX-8 vehicles, this recall fully supersedes recall 17V-011. | |
| 2005 MAZDA TRIBUTE | |
|---|---|
| NHTSA Campaign ID: | VEHICLE SPEED CONTROL:CABLES |
| Manufacturer: | MAZDA NORTH AMERICAN OPERATIONS |
| Manufacture Dates: | - |
| Potential Units Affected: | 217500 |
Defect Description:Mazda is recalling certain model year 2001 through 2006, and 2008, Tribute vehicles equipped with 3.0L V6 engines and speed control. Inadequate clearance between the engine cover and the speed control cable connector could result in a stuck throttle when the accelerator pedal is fully or almost-fully depressed. This risk exists regardless of whether or not speed control (cruise control) is used. Consequence:A stuck throttle may result in very high vehicle speeds and make it difficult to stop or slow the vehicle, which could cause a crash, serious injury or death. Action:Mazda will notify owners, and dealers will repair the vehicles by increasing the engine cover clearance, free of charge. Remedy parts are now available. The safety recall began on September 13, 2012. Owners may contact Mazda Customer Assistance Center at 1-800-222-5500, option #6. | |
| 2005 MAZDA TRIBUTE | |
|---|---|
| NHTSA Campaign ID: | ENGINE AND ENGINE COOLING |
| Manufacturer: | MAZDA NORTH AMERICAN OPERATIONS |
| Manufacture Dates: | - |
| Potential Units Affected: | 217500 |
Defect Description:Mazda is recalling certain model year 2001 through 2006, and 2008, Tribute vehicles equipped with 3.0L V6 engines and speed control. Inadequate clearance between the engine cover and the speed control cable connector could result in a stuck throttle when the accelerator pedal is fully or almost-fully depressed. This risk exists regardless of whether or not speed control (cruise control) is used. Consequence:A stuck throttle may result in very high vehicle speeds and make it difficult to stop or slow the vehicle, which could cause a crash, serious injury or death. Action:Mazda will notify owners, and dealers will repair the vehicles by increasing the engine cover clearance, free of charge. Remedy parts are now available. The safety recall began on September 13, 2012. Owners may contact Mazda Customer Assistance Center at 1-800-222-5500, option #6. | |
| 2005 MAZDA TRIBUTE | |
|---|---|
| NHTSA Campaign ID: | LATCHES/LOCKS/LINKAGES:HATCHBACK/LIFTGATE:LOCK |
| Manufacturer: | MAZDA NORTH AMERICAN OPERATIONS |
| Manufacture Dates: | 06/06/2003 - 07/30/2004 |
| Potential Units Affected: | 49800 |
Defect Description:CERTAIN 2004-2005 SPORT UTILITY VEHICLES AND CERTAIN 2001-2003 SPORT UTILITY VEHICLE HAVING REAR LIFTGATE COMPONENTS SERVICED WITH 2004 EQUIVALENT COMPONENTS FAIL TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 206, 'DOOR LOCKS AND DOOR RETENTION COMPONENTS.' THE REAR LIFTGATE LATCHING SYSTEM DOES NOT MEET THE INERTIA LOAD REQUIREMENT IN ONE DIRECTION. Consequence:IF THE LIFTGATE IS LEFT UNLOCKED, THERE IS THE POTENTIAL THAT IT MAY OPEN DURING A CRASH. Action:DEALERS WILL REPLACE THE REAR LIFTGATE LATCH RELEASE ROD, THE RELEASE ROD ATTACHMENT CLIP AND THE DOOR HANDLE RETURN SPRING. THE RECALL BEGAN ON MARCH 31, 2005. OWNERS SHOULD CONTACT MAZDA AT 1-800-222-5500. | |
| 2005 MAZDA TRIBUTE | |
|---|---|
| NHTSA Campaign ID: | SEATS:FRONT ASSEMBLY:HEAD RESTRAINT |
| Manufacturer: | MAZDA MOTOR CORP |
| Manufacture Dates: | - 03/31/2005 |
| Potential Units Affected: | 23100 |
Defect Description:CERTAIN SPORT UTILITY VEHICLES EQUIPPED WITHOUT SIDE AIR CURTAINS OR MOON ROOFS FAIL TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 201, "OCCUPANT PROTECTION IN INTERIOR IMPACT." DURING TESTING, THE FREE MOTION HEAD FORM REGISTERED A MEASUREMENT ABOVE THE PERMITTED LIMIT AT THE LEFT HAND A-PILLAR TRIM AREA. Consequence:IN THE EVENT OF A VEHICLE CRASH, PERSONAL INJURY TO OCCUPANTS MAY OCCUR. Action:DEALERS WILL MAKE MODIFICATIONS TO THE ENERGY ABSORBING MATERIAL LOCATED ABOVE THE HEADLINER IN THE AFFECTED AREA FREE OF CHARGE. THE RECALL BEGAN ON MAY 31, 2006. OWNERS MAY CONTACT MAZDA AT 1-800-222-5500. | |
